• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1029-1034
• /
• 2003

The Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$, superconducting thin films arc fabricated by using the sputtering and evaporation method. Because we confirmed the sticking ratio of Bi element in the Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$ superconducting thin film fabricated by using the sputtering method was much lower than the expected value, to get the enough number of the flakes of Bi, faraday cup was used to evaporate Bi clement. As a result of the fabrication, Bi 2201 and Bi 2212 single phases could be made by the optima of deposition condition. And we confirmed the sticking coefficient of Bi element was clearly related to the temperature change of the substrate and the generation of Bi22l2 phase

• Korean Journal of Mathematics
• /
• 제31권1호
• /
• pp.17-23
• /
• 2023

For a locus with two alleles (I^A and I^B), the frequencies of the alleles are represented by $$p=f(I^A)={\frac{2N_{AA}+N_{AB}}{2N}},\;q=f(I^B)={\frac{2N_{BB}+N_{AB}}{2N}}$$ where N_AA, N_AB and N_BB are the numbers of I^AI^A, I^AI^B and I^BI^B respectively and N is the total number of populations. The frequencies of the genotypes expected are calculated by using p², 2pq and q². Choi defined the density and operator for the value of the frequency of one gene and found the adapted partial differential equation as a follow-up for the frequency of alleles and applied this adapted partial differential equation to several diploid model [1]. In this paper, we find adapted equations for the model for selection against recessive homozygotes and in case that the alley frequency changes after one generation of selection when there is no dominance. Also we consider the triploid model with three alleles I^A, I^B and i and determine whether six genotypes observed are in Hardy-Weinburg for equilibrium.

• Korean Journal of Mathematics
• /
• 제30권1호
• /
• pp.67-72
• /
• 2022

For a locus with two alleles (I^A and I^B), the frequencies of the alleles are represented by $$p=f(I^A)={\frac{2N_{AA}+N_{AB}}{2N},\;q=f(I^B)={\frac{2N_{BB}+N_{AB}}{2N}$$ where N_AA, N_AB and N_BB are the numbers of I^AI^A, I^AI^B and I^BI^B respectively and N is the total number of populations. The frequencies of the genotypes expected are calculated by using p², 2pq and q². Choi showed the method of whether some genotypes is in these probabalities. Also he calculate the probability generating function for offspring number of genotype under a diploid model( [1]). In this paper, let x(t, p) be the probability that I^A become fixed in the population by time t-th generation, given that its initial frequency at time t = 0 is p. We find adapted equations for x using the mean change of frequence of alleles and fitness of genotype. Also we apply this adapted equations to several diploid model and it also will apply to actual examples.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제10권2호
• /
• pp.95-99
• /
• 2005

A breeding plan was carried out on four commercial strains of silkworm (Bombyx mori L.) 101, 102, 103 and 104 to improve some important traits. Genetic gain or response to selection $({\Delta}G)$, heritability of cocoon shell weight (CSW) and specific combining ability effects were estimated to determine the strains that can be improved. Strain 101 had lowest heritabitity, ${\Delta}G$ and viability. Strain 102 was acceptable in selection response but its viability was low. Therefore these two strains were not suitable for more selection. As a result, only lines 103 and 104 were chosen for further improvement. Intra population selection based on independent culling level method practiced from third to sixth generation for both productive and viability traits simultaneously. While CSW and CW had increasingly enhanced during primary generations, they went slightly up after third generation. According to negative genetic correlation, viability decreased during primary generations, but after third generation that paid attention to balanced development of both productive and viability traits, viability increased so that the pupation rate reached to $91\%$ in 103 and $97\%$ in 104 for last generation $(G_8)$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.330-335
• /
• 2001

While contacting directly with ground, the tire tread part is in shape of complex patterns of variable ASDs(anti-skid depth) for various tire performances. However, owing to the painstaking mesh generation job and the extremely long CPU-time, conventional 3-D tire analyses have been performed by either neglecting tread pattern or modeling circumferential grooves only. As a result, such simplified analysis models lead to considerably poor numerical expectations. This paper addresses the development of a systematic 3-D mesh generation of tires considering the detailed tread pattern. Basically, tire body and tread meshes are separately generated, and then both are to be combined. For the systematic mesh generation, which consists of a series of meshing steps, we develop in-house subroutines which utilize the useful functions of I-DEAS solid modeler. The detailed pattern mesh can be imparted partially or completely.

• 한국시스템다이내믹스학회:학술대회논문집
• /
• 한국시스템다이내믹스학회 2000년도 하계학술대회발표논문집
• /
• pp.65-102
• /
• 2000

In 1987, The Brundtland Report defined a sustainable development as the development that meets the needs of the present without compromising the ability of future generations to meet their own needs. This is the concept that we should cling to, to preserve natural resources of the present for the future generation. With this concept in mind, this paper criticized that the current waste management policy has been neglecting resource preservation aspect of waste management policy while giving too much emphasis on reducing waste generation. Thus, the purpose of this paper is to analyze how waste management policy can affect preservation of natural resources, and to investigate policy alternatives that can reduce both the volume of waste generated and the amount of natural resources that need to be consumed in the production process. The study was conducted based on the literature survey and system dynamics simulation. Borrowing Randers and Meadows's solid waste model with some modification of parameter and variables, this paper simulate several policy alternatives to figure out the most effective waste management policy set that can meet the need of the present without compromising the ability of the future generation to meet their own needs. Main concern was how to link waste management policy with resource management policy that can lead to minimization of waste generation and resource consumption.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.362-367
• /
• 2011

The aerodynamic performance of the pantograph of the next generation high sped train is analyzed. The calculation of the flow around pantograph is carried cut by FLUENT; by the steady state flow calculation with ${\kappa}-{\omega}$ SST turbulence model, the lift force of the pantograph is computed. For the verification of the numerical schemes am grid systems, flow calculations are performed with the pantograph shape which was used at the experiments performed at Railway Technical Research Institute (RTRI) in Japan. Then, the difference of lift force between numerical am experimental results is about 10%. Therefore, selected numerical schemes and the current grid system is adequate for the analysis am prediction of the aerodynamic performance of panthograph system. Based on these numerical schemes am grid system, the flow around pantograph of the next generation high sped train is calculated and the lift force of the pantograph is predicted; the lift force of the pantograph is about 146N.

• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.61-68
• /
• 1999

For the last two decades, waveform control techniques have been successively developed and applied for the inverter welding machines resulting in the substantial reduction of spatter generated in CO₂ welding. One of the constituents commonly involved in those techniques is to delay the instant of current increase to some extent after the initiation of short-circuiting. Although this technique has been known to be quite effective in reducing the spatter generation through the suppression of is instantaneous short circuiting, the delay time necessary for minimum spatter has not been clearly understood. In this study, the control system for varying the delay time was constructed so that the spatter generation rates could be measured over a wide range of delay time, 0.29-2.0 msec. As a result of this study, it was demonstrated that spatter generation rate(SGR) sharply decreased at delay time of 0.6 msec and longer accompanied with the change in characteristics of short circuit mode from the instantaneous short-circuiting(ISC) dominant to normal short-circuiting(NSC) dominant. Another feature that have been found in current waveform of over 0.6msec was the creation of current pulse right after the arc reignition stage. Because of this current pulses weld pool oscillated in wave-like fashion and it looks like to play an important role in developing short circuiting between electrode and weld pool.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.415-422
• /
• 2014

This paper presents a new approach to solve the multi area unit commitment problem (MAUCP) using an evolutionary programming based particle swarm optimization (EPPSO) method. The objective of this paper is to determine the optimal or near optimal commitment schedule for generating units located in multiple areas that are interconnected via tie lines. The evolutionary programming based particle swarm optimization method is used to solve multi area unit commitment problem, allocated generation for each area and find the operating cost of generation for each hour. Joint operation of generation resources can result in significant operational cost savings. Power transfer between the areas through the tie lines depends upon the operating cost of generation at each hour and tie line transfer limits. Case study of four areas with different load pattern each containing 7 units (NTPS) and 26 units connected via tie lines have been taken for analysis. Numerical results showed comparing the operating cost using evolutionary programming-based particle swarm optimization method with conventional dynamic programming (DP), evolutionary programming (EP), and particle swarm optimization (PSO) method. Experimental results show that the application of this evolutionary programming based particle swarm optimization method has the potential to solve multi area unit commitment problem with lesser computation time.

• 한국동물위생학회지
• /
• 제30권4호
• /
• pp.557-562
• /
• 2007

This study was carried out to discriminate Hanwoo from the milking and hybrid cattle by detection of MC1R gene related to bovine hair color. One hundred sixty six samples were collected from the abattoir (n = 106) and local market (n = 60). The beef from abattoir were originated from Hanwoo (n=27), Holstein (n=29), Hybrid (n=45) and imported cattle (n=5), respectively. The beef from market consisted of Hanwoo (n=36), Holstein (n=7) and imported ones (n=17). Commercialized screening kit (Kogenebiotec, Korea) was used for MC1R gene analysis. As a result, Hanwoo was discriminated from Holstein. However, 9 of 45 hybrid and 11 of 22 imported beef samples were indistinguishable from Hanwoo. It could be explained by second generation of crossing of Hanwoo with Holstein or the cattle with silver or yellow hair. This results suggest that additional tests as well as MC1R gene detection be needed to confirm Hanwoo beef among cattle beef.