• Journal of Biosystems Engineering
• /
• v.27 no.4
• /
• pp.327-334
• /
• 2002

In this study, energy conversion from thermal energy to mechanical power by using n-pentane was tested and exergy variation, cycle number, water quantity pumped and thermal efficiency were analyzed. The energy conversion was done and the water head could be ten meters on the experimental conditions. The operating temperature range of cycle was recommended to be around the liquid-vapour saturation temperature of the working fluid on the viewpoint of the maximum work. The cycle diagram was analyzed by the exergy analysis. For the constant water head, the cycle number was decreased and the water quantity per day was increased and thermal efficiency become higher when the water quantity per cycle become increasing. For the constant pumping water quantity per cycle, cycle number and the water quantity per day was decreased and the thermal efficiency become higher because the saturation temperature become higher when the water head become higher.

• Journal of The Korean Association For Science Education
• /
• v.15 no.3
• /
• pp.284-290
• /
• 1995

This study examined the effects of the learning cycle model by learner's characteristics such as I.Q., cognitive levels, inquiry skins, cognitive style, activity, reflectiveness. To see the effects of the learning cycle model, nonequivalent control group pretest-posttest multiple treatment designs was used in the study. 99 middle school second-graders(female) were divided into two groups. One group was selected as the experimental group (n=50), the other served at the comparison group(n=49). During the eight-month period, the students in the experimental group were instructed according to the learning cycle model, while the students in the comparison group were instructed according to the traditional instruction methods. Achievement data from science achievement test were analyzed by an ANOVA technique. The results of the study are as follows : 1. Science knowledge achievement. For the lower level students of activity, the learning cycle model is superior to the traditional approaches in science knowledge achievement. 2. Science inquiry skills. For the upper level students of I.Q., cognitive levels, inquiry skills, cognitive style and reflectiveness, the learning cycle model is superior to the traditional approaches in science inquiry skills. 3. Attitudes toward science. For the lower level students of I.Q., cognitive levels, inquiry skills, cognitive style, activity and reflectiveness, the learning cycle model is superior to the traditional approaches in attitudes toward science.

• Communications of the Korean Mathematical Society
• /
• v.24 no.2
• /
• pp.161-169
• /
• 2009

In this paper, we introduce the generalized ideal-based zero-divisor graph structure of near-ring N, denoted by $\widehat{{\Gamma}_I(N)}$. It is shown that if I is a completely reflexive ideal of N, then every two vertices in $\widehat{{\Gamma}_I(N)}$ are connected by a path of length at most 3, and if $\widehat{{\Gamma}_I(N)}$ contains a cycle, then the core K of $\widehat{{\Gamma}_I(N)}$ is a union of triangles and rectangles. We have shown that if $\widehat{{\Gamma}_I(N)}$ is a bipartite graph for a completely semiprime ideal I of N, then N has two prime ideals whose intersection is I.

• Applied Biological Chemistry
• /
• v.10
• /
• pp.101-105
• /
• 1968

The effect of concentration of carbon and nitrogen sources on the sporulation and the life cycles of three strains of Zygosaccharomyces was investigated. The results are as follows: 1) The good sporulation of Zygosaccharomyces bisporus, delbruekii, and Z. steineri was obtained on solid medium containing 0 to 0.001% of nitrogen and 10 to 20% of glucose. The high content of nitrogen was detrimental to sporulation and asci were formed under 0.01% of nitrogen. 2) It is widely accepted that the life cycle of Zygosaccharomyces proceeds in the following way: Ascospore...Vegetative cells...Conjugation of vegetative cells...Sporulation...Ascopores But zygotes of Z. bisporus proceeded to vegetative cells when transfered to the suitable medium for vegetative reproduction, and then formed asci.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.250-257
• /
• 2006

The objective of this study is to propose an alternative process for the small sewage treatment plants in rural communities. A biofilter has been used for biological wastewater treatment, which is becoming the alternative to the conventional activated sludge system. The proposed process used in this study, which is packed with floating media (i.e. expanded polystylene), has advantages of biofilter system and alternative flow system and they are incorporated into one process. Pilot and bench scale studies were performed using domestic wastewater. In the results of pilot plant study, it was observed that the stable effluent water quality was achieved and it met the present effluent criteria of suspended solid (SS), organic matters, T-N and T-P. In the study for determination of the cycle of backwashing, it was observed that the cycle of backwashing depended on BOD loading rates of influents. In the BOD loading rates of $0.5kg\;BOD/m^3{\cdot}day$ and $1.0kg\;BOD/m^3{\cdot}day$, the backwashing cycle of 28 hour and 16 hour were needed, respectively. The optimum backwashing time was 120~80 seconds at the media expansion rate of 50%. In the removal of SS, organic matters, T-N and T-P, SS removal was rather achieved by physical filtration than biological mechanism and the removal of organic matters except for SS, T-N and T-P were mainly rather achieved by biological mechanism than physical filtration. In bench-scale study, the effects of recirculation rate was investigated on removal of SS, TCOD, T-N and T-P. It was observed that the recirculation made removal efficiencies of SS, TCOD, T-N and T-P increased. Especially, in T-N removal, the increase of T-N removal efficiency of 40% was observed in the reicirculation rate of 1Q compared with 0Q.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.134-140
• /
• 2014

The paper presents an overview of the present state of study on the fatigue behaviors at very high number of cycles ($N_f$ > $10^7$). A classification of materials with typical S-N curves and influencing factors such as notches, residual stresses, temperatures, corrosion environments and stress ratios are given. The microstructural inhomogeneities of materials and micro-cracks played an important roles in very high cycle fatigue behaviors. The failure mechanisms for the fatigue design of materials and components are mentioned.

• East Asian mathematical journal
• /
• v.26 no.5
• /
• pp.655-670
• /
• 2010

The complete multipartite graph $K_{n(m)}$ with n $ {\geq}$ 4 partite sets of size m is shown to have a decomposition into 4-cycles in such a way that vertices of each cycle belong to distinct partite sets of $K_{n(m)}$, if 4 divides the number of edges. Such cycles are called gregarious, and were introduced by Billington and Hoffman ([2]) and redefined in [3]. We independently came up with the result of [3] by using a difference set method, and improved the result so that the composition is circulant, in the sense that it is invariant under the cyclic permutation of partite sets. The composition is then used to construct gregarious 4-cycle decompositions when one partite set of the graph has different cardinality than that of others. Some results on joins of decomposable complete multipartite graphs are also presented.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2809-2818
• /
• 2022

In this investigation work, liquid-liquid extraction (L.L.E) through three distinctive frameworks have been examined for assurance of slip velocity (S.V), and characteristic velocity (C.V) in a non-center rotating column (N.C.R.C) with a wide extend of factors. Three double frameworks with distinctive interfacial tension comprising of toluene-water (high interfacial tension), n-butyl acetate-water (medium interfacial tension), and n-butanol-water (low interfacial tension) were investigated for tests. Two common relationships for the expectation of S.V and C.V, including phase stream rates, rotor speed, column geometry additionally physical properties, are displayed. The recommended relationships were compared with test information gotten from the writing and the display examination. Findings of this study, the present proposed correlations are more accurate than those previously reported.

• Journal of the Chungcheong Mathematical Society
• /
• v.22 no.4
• /
• pp.789-797
• /
• 2009

Invertible transformations over n-bit words are essential ingredients in many cryptographic constructions. When n is large (e.g., n = 64) such invertible transformations are usually represented as a composition of simpler operations such as linear functions, S-P networks, Feistel structures and T-functions. Among them we will study T-functions which are probably invertible transformation and are very useful in stream ciphers. In this paper we will show that $f(x)=x+(g(x)^2{\vee}C)$ mod $2^n$ is a permutation with a single cycle of length $2^n$ if both the least significant bit and the third significant bit in the constant C are 1, where g(x) is a T-function.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.4
• /
• pp.168-173
• /
• 2014

The paper presents the comparative results of TiAlN coatings deposited by DC and pulsed DC asymmetric bipolar magnetron sputtering systems. The results show that, with the decreasing duty cycle and increasing pulse frequency, the coating morphology changes from a columnar to a dense structure, with finer grains. Pulsed sputtered TiAlN coatings showed higher hardness, higher residual stress, and smaller grain sizes than dc prepared TiAlN coatings. Moreover residual stress of pulsed sputtered TiAlN coatings increased on increasing pulse frequency. Meanwhile, the surface roughness decreased continuously with increasing pulsed DC frequency up to 50 kHz.