• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.1-5
• /
• 1986

The influences of $LiNO_3\;and\;AgNO_3$ on the N-C(O) rotational barrier of N,N-dimethylacetamide and N,N-dimethylpropionamide have been investigated. The rotational activation free energy $({\Delta}G^{\neq})\;for\;Li^{+}$-amide complexes is found to increase with increasing salt concentration. On the other hand, that for $Ag^+$-amide complexes increases in the presence of $Ag^+$ ion up to 0.25 M ion concentration and then decreases as the concentration of $Ag^+$ ion is further increased. Such an unusual behavior of $Ag^+$-amide complexes has been interpreted in terms of ion-pairing and diluent effect on the amides. However, $^{13}C$ nmr chemical shift data for the amides have shown that both of these ions interact primarily with the carbonyl group in amides.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.110-114
• /
• 1998

The hydrogen-bonding interactions between thioacetamide (TA) and urea derivatives such as tetramethylurea (TMU) and dimethyldiphenylurea (DMDPU) have been studied using near-infrared absorption spectroscopy. Thermodynamic parameters for the interactions between TA and urea derivatives were determined by analyzing the $v^{as}_{N-H}$+Amide Ⅱ combination band of TA at 1970 nm. The ΔH° values, indicating the intrinsic strength of hydrogen bonding, are - 23.0 kJ/mole and - 19.8 kJ/mol for TMU and DMDPU, respectively. This is well explained by the inductive effects of substituents. Ab initio molecular orbital calculations for the proton affinity of TMU, N,N-dimethylformamide (DMF), and N,N-dimethylacetamide (DMA) in gas phase have been carried out at HF/3-21G ad HF/6-31G(d) levels, showing that the proton affinity of TMU is larger than that of DMA, which agrees well the experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.977-982
• /
• 2013

Cellulose mixed esters (CME), substituted by various fatty acyl chains, are renewable bio-based polyesters. It has lots of potential due to the biodegradable property. In this study, Alpha cellulose was activated for 2h at $40^{\circ}C$ in deionized water prior to synthesis. Homogeneous esterification of CME was accomplished with water-activated alpha cellulose, various saturated fatty acids and acetic anhydride in lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) medium. CME was obtained after 5 hr at $120^{\circ}C$. The filtrated products were characterized using TGA, FT-IR, 1H-NMR and FE-SEM, and the influence of water activation on the total degree of substitution was investigated.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.391-397
• /
• 2010

Poly(amic acid)(PAA) was prepared by reaction of bicyclo(2,2,2)oct-7-ene-2,3,5,6-tetracarboxylicdianhydride(BTDA) containing double bond for crosslinking and bis[4-(3-aminophenoxy) phenyl] sulfone(BAPS) in N,N-dimethylacetamide(DMAc). The cast film of PAA was heat-treated at different temperatures to create polyimide(PI) films. With increasing thermal crosslinking temperatures from 250 to $350^{\circ}C$, the thermo-mechanical properties, degree of crosslinking, and optical transparency of the cross-linked PI were investigated. The maximum enhancement in the thermo-mechanical properties was observed at a heat treatment condition of $350^{\circ}C$. However, the optical transparency was found to be optimal for $250^{\circ}C$ heat treatment. The degree of crosslinking in NMR was determined to be 85% to 93% with increasing annealing temperature conditions from 250 to $350^{\circ}C$.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.480-484
• /
• 2010

A series of poly(amic acid)s(PAAs) was prepared by reacting 4,4'-(4,4'-isopropylidenediphenoxy) bis(phthalic anhydride)(BPADA) as the anhydride monomer and 2,2'-bis(trifluoromethyl) benzidine (TFB), bis(3-aminophenyl)sulfone (APS), 4,4'-methylenebis-(2-methylcyclohexylamine) (MMCA), or bis[4-(3-aminophenoxy) phenyl] sulfone (BAPS) as the amine monomer with 5 mol% melamine in N,N-dimethylacetamide (DMAc). Colorless and transparent polyimide (PI) films were obtained by casting the PAAs at various heat treatment temperatures. The thermo-mechanical properties and optical transparency of the PI films were investigated. The thermal properties of the PI films were examined using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and thermomechanical analysis (TMA), and their optical transparency were measured by spectrophotometry. The coefficient of thermal expansion (CTE) and yellow index (YI) values of all samples were in the range of $48.53-64.24ppm/^{\circ}C$ and < 3.0, respectively.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.204-210
• /
• 2013

Recently, many applications with grapheneoxide (GO) have been reported. But GO membrane for water treatment has not been developed. In this study we prepared polyvinylidene difluoride (PVdF) nanofiber/GO hybrid membrane (FG) for the microfiltration application. The PVdF substrate membrane was prepared by using the electrospinning method with a solution of PVdF in N,N-dimethylacetamide (DMAc) and acetone. GO sheets used in this study were prepared by modified Hummer's method. The PVdF/GO hybrid membrane was finally prepared by spraying the GO solution dispersed in ethanol on the PVdF nanofiber. The successfully prepared FG was thoroughly examined by SEM, Raman, contact angle, porometer and UTM, and water-flux was measured with designed cell (Dead-End Cell). From the contact angle results, it was found that the surface of FG membrane was reformed by hydrophilic property and the water permeability was increased about 2.5 times than that of the nascent PVdF membrane, indicating the possible alternative of the commercial MF membrane.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.448-454
• /
• 2012

A poly(amic acid) (PAA) was prepared by reaction of 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluropropane (BAPP) in N,N-dimethylacetamide (DMAc). The cast films of the synthesized PAA were thermally treated at different temperatures to create polyimide (PI) films. The heat treatment temperature varied between 80 and $230^{\circ}C$ to investigate the imidization index in relation with the solvent evaporation rates. The progress of PAA imidization was examined using a thermogravimetric analyzer (TGA) and a Fourier transform infrared spectroscope (FTIR) at various time and temperature. The experimental results showed that the imidization index was fast at the initial stage in the presence of solvent, DMAc, reaching the final imidization. When the imidization temperature is high over $200^{\circ}C$, the imidization index decreased because the solvent was evaporated too fast.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.48-56
• /
• 2011

In this study, we investigated the C-V diagrams and metal surface related to the electrochemistry characterization of metal(nickel, SUS-304). We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system. A measuring range was reduced from initial potential to -1350mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate were 50, 100, 150, 200 and 250 mV/s. As a result, the C-V characterization of metal using N,N-dimethylacetamide and N,N-dimethylformamide inhibitors appeared irreversible process caused by the oxidation current from the cyclic voltammogram. After adding organic corrosion inhibitors, adsorption film constituted, and the passive phenomena happened. According to the results by cyclic voltammetry method, it was revealed that the addition of inhibitors containing amide functional group enhances the corrosion resistance properties.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.238-248
• /
• 2007

A series of polyhydroxyamides(PHAs) having ether linkages in the polymer backbone were prepared via solution polycondensation at low temperature. These polymers were studied by FT-IR, $^1H-NMR$, DSC, TGA and PCFC. The PHAs exhibited inherent viscosities in the range of $0.5{\sim}1.1dL/g\;at\;35^{\circ}C$ in DMAc solution. Most of PHAs except PHA 3 were soluble in polar organic solvents such as N,N-dimethylacetamide(DMAc), N-methyl-2-pyrrolidone(NMP), and N,N-dimethylform-amide(DMF). Subsequent thermal treatment of PHAs afforded polybenzoxazols(PBOs). However, the PBOs were insoluble in a variety of solvents. Most of the PBOs except PBO 3 showed glass-transition temperature($T_g$) in the range of $200{\sim}246^{\circ}C$ by DSC and maximum weight loss temperature in the range of $597{\sim}697^{\circ}C$ in nitrogen by TGA. PBOs showed high char yields in the range of $51{\sim}64%$. PCFC results of the PBOs showed the heat release(HR) capacity, $8{\sim}65J/gK$ and total heat release(total HR), $2.4{\sim}4.7kJ/g$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2311-2316
• /
• 2010

Three series of copolyterephthalamides having biphenyl-2,2'-diyl structure in the main chain, were synthesized from p-phenylene-containing diamines such as p-phenylene diamine, 4,4'-oxydianiline or 1,4-bis(4-aminophenoxy)benzene, with mixed diacids of terephthalic acid and 2,2'-bibenzoic acid by the direct polycondensation method. The resulting copolymers had inherent viscosities ranging from 0.46 to 0.93dL/g, and most of them could be readily dissolved in polar aprotic solvents including N,N-dimethyl acetamide and N-methyl-2-pyrrolidone. These copolymers had glass transition temperatures between 239 and $326^{\circ}C$, and their 10% weight loss temperatures were recorded in the range of $410{\sim}485^{\circ}C$ in nitrogen atmosphere.