• Journal of Life Science
• /
• v.11 no.2
• /
• pp.173-180
• /
• 2001

This study was conducted to estimate the cultural characteristics, the production of antibiotic, and the selection of optimal media for mass culture of Bacillus licheniformis N1 isolate which was previously reported as an antagonistic bacterium to Botrytis cinerea. We investigated initial pH, temperatures and shaking speed for good cultural conditions and antibiotics production by N1 isolate. According to the results, the optimal conditions of initial pH, temperatures, and shaking speed were determined to be pH 5.0~5.5, 30~35$^{\circ}C$ and 250 rpm, respectively. Also, the optimal conditions for the antagonism by N1 isolate highly appeared in the initial pH as 5.0, and the mycelial growth inhibition was high when the substances used such as glucose or corn starch as carbon sources, and biji(soybean curd residue) flour as a nitrogen source. Furthermore, inhibitory area was significantly expanded, when 3% or 5% of corn starch was added into 5% of Biji flour as nitrogen source, were respectivley selected for mass culture of N1 isolate. Among them, 5% Biji flour medium showed higher cell density more than 10 times that in NB medium after 48 hour incubation. Therefore, the optimal medium was determined as 5% biji flour added 3~5% of corn starch for high density of cells.

• Journal of Mushroom
• /
• v.2 no.2
• /
• pp.88-96
• /
• 2004

This study was executed to decide the physiological characteristics of Ferule mushroom. Four strains of Ferule mushroom were tested to select a superior strain in its mycelial growth. The pertinent substrates, temperature and pH ranges for the growth of selected strain were determined. And then, the wood rotting ability and type of the Ferule mushroom were determined. The superior strain F-2 among four strains was selected, on the basis of its vegetative mycelial growth and density on agar media. Mycelial growth of F-2 was the best on MYPA among other tested synthetic or semi-synthetic media. The temperature range for pertinent mycelial growth was about $25{\sim}34^{\circ}C$ and best at $30^{\circ}C$. The optimum pH range on MYPA was 5.0~6.0. The mycelial growth was mostly stimulated by soluble starch at cont. 1% (w/w) and secondly, maltose among several carabon sources and by mixed solution of YE(0.25%) and ME(0.25%) but not by ME alone. Cell thining and erosion of Pinus rigida wood by the mycelia of Ferule mushroom were found only on a few cell but largely at wood block test, indicating that the softwood rotting ability of Ferule mushroom mycelia was not so good. The result of polarized light microscopy appeared that cellulose of some tracheides showing the S3 layer lost brifringence was degraded by Ferule mushroom. But only part of cellulose of P. rigida wood was degraded by Ferule mushroom, because most of wood cells continued to showing briefingence. A largely degraded ray parenchyma and longitudinal parenchyma cell and partly thinning and erosion of hardwood(Quercus serrata) cell was found and it indicates that the rotting ability of Ferule mushroom mycelia on hardwood was higher than on softwood. It could be concluded that the difference in the wood rot by Ferule mushroom between the hardwood and softwood was made by the difference of chemical constitutions between them, especially in the contents and the types of lignin. Ferule mushroom was considered as white rotter as a result of bavendam test, although more research should be required.

• Journal of Mushroom
• /
• v.14 no.3
• /
• pp.75-80
• /
• 2016

Morphological and culture characteristics of the novel Phellinus linteus variant KACC93057P collected in Korea were characterized in this study. The surface of the was angular, sessile, tough-woody, concentrically zonate, and dark brown in color. Basidiocarppores were circular, with 5-7 pores per mm. The hyphal system was dimitic, and basidiospores were ellipsoid or oval, $4.5-6{\times}4-5$, exhibiting characteristics typical of P. linteus. The optimum temperature for mycelial growth was $25-30^{\circ}C$, and optimal pH for growth was 5-7. The mycelial growth rate of P. linteus KACC93057P was faster than that of other P. baumii isolates. On growth medium, KACC93057P formed aerial mycelia with density higher than that of other isolates. The internal transcribed spacer (ITS)-ribosomal DNA sequences were closely related to the sequences P. linteus complex.

• The Korean Journal of Mycology
• /
• v.43 no.1
• /
• pp.26-32
• /
• 2015

In this study, a new cultivar of Lentinula edodes was bred from dikaryotic KFRI 490 and monokaryotic KFRI 536 by Di-mon method. The new breed was named "Poongnyunko" and physiological characteristics was investigated. Its optimal growing temperature was $25^{\circ}C$, and it had thin density. Its colony was colorless and did not form any epithelium. On the $7^{th}$ day of mycelial growth, "Poongnyunko" was 56.6 mm, and showed higher cellulase activity compared with "Sanlim 4-ho"(52.9 mm). On the $5^{th}$ day of mycelial growth, "Poongnyunko" was 58.0 mm, and showed higher laccase activity compared with "Sanlim 4-ho" (55.6 mm). Its pH at a substrate was 6.0. Before cultivation, the pH of sawdust substrate was 4.7-5.5 went down to 3.7-3.9 after 120-day cultivation. After 60 days of cultivation, the change of $CO_2$ was the greatest. During the cultivation, $CO_2$ concentration in a growing bag was 4.67% to 3.90%.

• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.299-303
• /
• 2018

Flammulina velutipes, which is a white rot fungus, is a commercially important edible mushroom and is produced in large quantities with the help of an automated and mechanized cultivation system in Korea. F. velutipes has the lowest distribution rate among domestic cultivars, estimated at about 20 percent. As most white cultivars of F. velutipes produced and exported to Korea were introduced from Japan, farmers pay large amounts of royalties. Therefore, we have developed a new, purely domestic cultivar, "Baeke," to substitute for Japanese cultivars, which has improved storage characteristics for export. Baeke was bred by mating two monokaryotic strains isolated from ASI 4216-18 (Hansol) and ASI 4217-26 (Baekjung). Baeke showed faster mycelial growth and higher mycelial density upon incubation for seven days at $25^{\circ}C$ on PDA media than the control variety. The mycelial growth of Baeke was even maintained at $30^{\circ}C$ unlike the control. The lengths of pilei and stipes in Baeke harvested in the optimal stage were $11.2{\pm}0.5mm$ and $125{\pm}5.4mm$, respectively, and they were $11{\pm}0.5mm$ and $141.9{\pm}5.7mm$, respectively, in the control harvested in the optimal stage. The yields of Baeke ($257.4{\pm}13.5g$) and control ($270.7{\pm}17.8g$) per 1,100ml in bottle cultivation showed no significant difference. Overall, our results showed that Baeke was at par with foreign varieties of Flammulina velutipes in terms of quality and yield and had a uniformly shaped fruitbody, which added to its commercial value.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.22-29
• /
• 1996

Immobilized bioprocess was carried out for continuous production of cyclosporin A (CyA) produced intracellularly as a secondary metabolite by a filamentous fungus, Tolypocladium inflatum. Immobilization procedure for entrapping conidiospores of the producer was significantly simplified by use of a modified immobilization technique. A newly-designed immobilized perfusion reactor system (IPRS) showed good process benefits as demonstrated by the role of the high density immobilized cells as an efficient biomass generator, continuously supplying highly active CyA-producing free cells (1.0g/$\ell$/hr) even at very high dilution rate ($0.1hr^{-1}$). IPRS bioprocess was possible since efficient decantor system developed in our laboratory separated the sloughed-off free cells from the immobilized biomass effectively, thus overcoming wash-out phenomenon frequently encountered in continuous free cell cultures. Furthermore the released-free cells remaining in the bulk solution did not appear to cause substrate mass transfer limitation which was often experienced in suspended mycelial fungal cell fermentations. The primary reason for this was that the suspension broth of the IPRS mainly consisted of roundshaped short mycelial fragments and conidiospores, still remaining Newtonian even at high cell density. In parallel with IPRS bioprocess development, other key factors to be considered necessarily for significant increase in CyA productivity would be strain improvement and medium optimization for the immobilized cells.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.338-341
• /
• 2018

This study investigated the possibility of using pine tree sawdust in thinning-out tree as a substitute for poplar and douglas-fir tree sawdust in oyster mushroom cultivation. Mycelial growth was 10.8 cm in medium supplemented with 70% pine sawdust after 18 days of culture and 10.2 cm in control medium. Mycelial density showed high density with no significant difference between treatments. Fresh weight and diameter of fruiting bodies were slightly lower in medium supplemented with pine tree sawdust. The hardness of pine tree sawdust was slightly higher in the medium supplemented with 20% and 30% of pine tree sawdust. The L value showed a tendency to be higher in the pine added medium, but the a and b values d id not show any significant difference between the treatments. The yields of fruiting body were 157 g / 850 ml for the control and 170 g / 850 ml for the 40% added pine tree sawdust.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.101-104
• /
• 2004

For artificial cultivation of Phellinus baumii, we have conducted a study on cultural characteristics and condition of fruitbody formation in sawdust cultivation. Mycelial density and incubation rate were higher in oak sawdust+rice bran (4 : 1) medium than oak sawdust 100% medium. However, primordia and fruitbody formation were higher in oak sawdust 100% medium than rice bran added medium. Bigger bottle capacity (1,100 ml) resulted in a little higher yield and more biological efficiency than 850 ml bottle.

• Journal of Agricultural Extension & Community Development
• /
• v.6 no.2
• /
• pp.141-147
• /
• 1999

This experiments were carried out to development low-priced mushroom culture media, and the results were as follows : Mycerial growth and density of Pleurotus ostreatus in the culture media of 40% of yellow soil, upland soil and lowland soil(each and all) added 60% sawdust and rice bran(80:20, %, v/v) were 89, 88, 68mm/10days in that order. Lentinus edodes were in the media of $40{\sim}50%$ of that added 60% sawdust and rice bran(80:20, %, v/v) were 74, 71, 68mm/10days. Ganoderma lucidum were in the media of $40{\sim}50%$ of that added 60% sawdust and rice bran(80:20, %, v/v) were 98, 94, 89mm/10days in that order.