• 제목/요약/키워드: Munitions

검색결과 110건 처리시간 0.022초

Smart Defense 를 위한 IT 기술 개발 (Development of Information Technology for Smart Defense)

  • 정교일;이소연;박상준;박종현;한상철
    • 대한기계학회논문집A
    • /
    • 제38권3호
    • /
    • pp.323-328
    • /
    • 2014
  • 정보통신기술과 타 산업분야 기술과의 융복합은 전통적인 제조업을 비롯한 의료, 건설 분야뿐 만이 아니라 국방 분야에서도 그 수요가 점점 증대되고 있어 민 군의 공통적인 기술 수요와 요구사항들이 새롭게 대두되고 있다. 미래 전장환경은 점차 네트워크를 근간으로 하는 NCW(Network Centric Warfare)로 전환될 것으로 예측되고 있다. NCW 는 C4I-ISR-PGM 의 사이클로 이루어지는 적의 탐지부터 타격까지를 의미하는 것이다. 이를 위하여는 정보통신 기술이 근간이 되어야 하며, 실제 전장을 모사할 수 있는 사이버 전장환경이 수반되어야 더욱 더 효과적이다. 본 논문에서는 최근에 연구개발이 본격화하고 있는 스마트 국방 IT 기술 개발 현황 및 향후 전망에 대해 제시하고자 한다.

확장 칼만필터를 이용한 탄도수정탄의 대기속도 추정 (Airspeed Estimation of Course Correction Munitions by Using Extended Kalman Filter)

  • 성재민;김병수
    • 한국항공우주학회지
    • /
    • 제43권5호
    • /
    • pp.405-412
    • /
    • 2015
  • 본 논문은 회전안정성을 갖는 탄도수정탄의 대기속도 추정을 위한 필터 설계에 대하여 설명한다. 대상 시스템은 운용상의 제약(공간, 파워)으로 인하여, 대기속도 측정을 위한 센서를 사용할 수 없다. 따라서 한정된 센서를 이용한 대기속도 추정이 필요하다. 따라서 본 연구에서는 IMU(가속도계, 자이로)에서 측정하는 3축 가속도와 각속도 데이터만 이용하여, 대기속도 추정을 위한 필터를 설계하였다. 대상 시스템의 경우, 넓은 속도, 고도의 운용범위를 커버하기 위한 추정 필터가 필요하므로 본 연구에서는 확장 칼만필터를 설계하여 기존의 연구와의 차별성을 두었다. 확장 칼만필터 설계를 위한 자코비안 행렬은 NRF(No-roll frame)에서의 간략화된 선형모델을 이용하여 구성하였다. 최종적으로 센서 오차와 바람 모델을 포함한 시뮬레이션을 통해 그 성능을 검토하였다. 이때, 시뮬레이션은 설계한 대기속도와 각속도 모델 오차의 영향을 분석하기 위하여 네 가지 경우의 프로세스 공분산 행렬 값에 대한 영향을 분석하였다.

국방품질경영시스템 요구사항에 대한 중요도-난이도 분석 (Importance-Difficulty Analysis for DQMS Requirements)

  • 김윤희;박종훈;이상천
    • 산업경영시스템학회지
    • /
    • 제40권3호
    • /
    • pp.49-58
    • /
    • 2017
  • The DQMS (Defence Quality Management System) is a certification system that manages participating companies to improve the quality of munitions. Since Korean Defense Specification (KDS) for DQMS certification that was established by adding military requirements based on the ISO quality standard, many companies complain that they should pay too much effort into the preparation process. However, it is hard to find helpful information on the preparation process because we have been only interested in the effect of DQMS acquisition. The purpose of this paper is to provide helpful information to companies preparing for DQMS certification. We surveyed the degree of difficulty and importance of the DQMS requirements from the companies with certification experience, and performed IDA (Importance-Difficulty analysis) by dividing the companies into the main contractor and the subcontractor. The result of IDA shows that there is a different recognition to the DQMS certification between main-contracting and sub-contracting companies. Subcontractor has more difficulties than main contractor in preparing the DQMS certification. In addition, we are able to identify the difficult and important requirements in the preparation process to the DQMS certification. Both main contractor and subcontractor have difficulty to the requirements related to configuration or validation such as 'customer controls configuration', 'configuration review shall be implemented' and 'design and development validation documentation.' The requirements related to customers are important to main contractor but the subcontractor regards difficult requirements as important ones. The result of this paper would be helpful to both the company preparing for DQMS and the munitions quality assurance agency.

항공탄약 구매 비용 절감 방안에 관한 연구 (A Study on the Cost Reduction Strategy of Aviation Ammunition)

  • 김유현;엄정호
    • 안보군사학연구
    • /
    • 통권15호
    • /
    • pp.57-86
    • /
    • 2018
  • The ROKAF has been training for a number of exercise for victory in the war, but the lack of aviation ammunition has become a big issue every year. However, due to the limitation of defense resources, there are many difficulties in securing and stockpiling ammunition for the war readiness. Therefore, there is a need to find a way to secure aviation ammunition for war readiness in a more economical way, so In this study, we analyze the precedent research case and the case of the reduction of the purchase cost of weapon system of other countries, and then I have suggested a plan that is appropriate for our situation. As a result of examining previous research cases for this study, there were data that KIDA studied in 2012, Precision-guided weapons acquisition cost reduction measures pursued by US Air Force And the use of procurement agencies that are being implemented by NATO member countries. Based on this study, the following four measures were proposed to reduce the purchase cost of aviation ammunition. First, the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Second, join the NATO Support & Procurement Agency (NSPA) Third, it builds a purchasing community centered on the countries operating the same ammunition Fourth, participating in the US Air Force's new purchase plan for ammunition and purchase it jointly. The main contents of these four measures are as follows. 1. the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Korea has signed agreements on mutual logistics support with 14 countries including the United States, Israel, Indonesia, Singapore, Australia, and Taiwan. The main purpose of these agreements is mutual support of munitions and materials, also supporting the training of the peace time and promoting exchange and cooperation. However, it is expected that there will be many difficulties in requesting or supporting mutual support in actual situation because the target or scope of mutual aid of ammunition is not clearly specified. Thus, a separate agreement on the mutual co-operation of more specific and expanded concepts of aviation ammunition is needed based on the current mutual aid support agreements 2. join the NATO Support & Procurement Agency (NSPA) In the case of NATO, there is a system in which member countries purchase munitions at a low cost using munitions purchase agencies. It is the NATO Purchasing Agency (NSPA) whose mission is to receive the purchasing requirements of the Member Nations and to purchase them quickly and efficiently and effectively to the Member Nations. NSPA's business includes the Ammunition Support Partnership (ASP), which provides ammunition purchase and disarming services. Although Korea is not a member of NATO, NSPA is gradually expanding the scope of joint procurement of munitions, and it is expected that Korea will be able to join as a member. 3. it builds a purchasing community centered on the countries operating the same ammunition By benchmarking the NSPA system, this study suggested ways to build a purchasing community with countries such as Southeast Asia, Australia, and the Middle East. First, it is necessary to review prospectively how to purchase ammunition by constructing ammunition purchasing community centered on countries using same kind of ammunition. 4. participating in the US Air Force's new purchase plan for ammunition When developing or purchasing weapons systems, joint participation by several countries can reduce acquisition costs. Therefore, if the US Air Force is planning to acquire aviation ammunition by applying it to the purchase of aviation ammunition, we will be able to significantly reduce the purchase cost by participating in this plan. Finally, there are some limitations to the method presented in this study, but starting from this study, I hope that the research on these methods will be actively pursued in the future.

  • PDF

본질안전방폭용 BARRIER에 관한 연구 (A Study on the Barrier of Intrinsic Safety Type)

  • 오진석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권6호
    • /
    • pp.938-945
    • /
    • 2004
  • Intrinsic safety is generally considered the safest method of operating electrical instrumention in potentially explosive atmospheres. The method of intrinsic safety limits the energy passing into the hazardus area. The energy limitation is provided by the use of safety barriers which are mounted in the safe area. Because of the energy limitation, regardless of the fault in the hazardous area, sufficient energy cannot be released to ignite the explosive atmosphere. The following industries are known to have hazardous locations: chemical. munitions, petrochemical, auto(paint spray booths), grain, waste water, printing, distillers, pharmaceutical. breweries, cosmetics, and utilities. In this paper, a isolator type barrier for ship(LNG, LPG, etc,) and test equipment confidence are proposed. The test equipments are designed for mechanical electrical life time test and vibration. All of test results satisfy the goal and the studied barrier shows the improved confidence.

1D CCM 탄도수정 성능예측 및 알고리즘 구현 연구 (A Study on Course Correction Performance Expectation & Algorithm Implementation of 1D CCM)

  • 김기표
    • 한국군사과학기술학회지
    • /
    • 제10권1호
    • /
    • pp.5-13
    • /
    • 2007
  • The trajectory of an current artillery munition is subject to a variety of different error sources resulting in more or less big deviation from the nominal predicted flight path. The 1D CCM(Course Correction Munition) has appeared to solve this problem and the mechanism of 1D CCM is a simple and low cost one using the influence of drag to range behavior of an artillery munition. In the paper 1D CCM concept has been simulated using wind tunnel experiment results of the specified Korean munition with CCF(Course Correction Fuze) and calculated the performance of its rang error reduction. From the simulated results it can be numerically explained that the possibility of adaptation of 1D CCM concept to Korean artillery munitions.

표적군 기반 공격 편대군 조합 최적화 모형 (Combinatorial Optimization Model of Air Strike Packages based on Target Groups)

  • 조상현;이문걸;장영배
    • 대한산업공학회지
    • /
    • 제42권6호
    • /
    • pp.386-394
    • /
    • 2016
  • In this research, in order to optimize the multi-objective function effectively, we suggested the optimization model to maximize the total destruction of ground targets and minimize the total damage of aircrafts and cost of air munitions by using goal programming. To satisfy the various variables and constraints of this mathematical model, the concept of air strike package is applied. As a consequence, effective attack can be possible by identifying the prior ground targets more quickly. This study can contribute to maximize the ROK air force's combat power and preservation of high value air asset in the war.

Precise Distribution Simulation of Scattered Submunitions Based on Flight Test Data

  • Yun, Sangyong;Hwang, Junsik;Suk, Jinyoung
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제18권1호
    • /
    • pp.108-117
    • /
    • 2017
  • This paper presents a distribution simulation model for dual purpose improved conventional munitions based on flight test data. A systematic procedure for designing a dispersion simulation model is proposed. A new accumulated broken line graph was suggested for designing the distribution shape. In the process of verification and simulation for the distribution simulation model, verification was performed by first comparing data with firing test results, and an application simulation was then conducted. The Monte Carlo method was used in the simulations, which reflected the relationship between ejection conditions and real distribution data. Before establishing the simulation algorithm, the dominant ejection parameter of the submunitions was examined. The relationships between ejection conditions and distribution results were investigated. Five key distribution parameters were analyzed with respect to the ejection conditions. They reflect the characteristics of clustered particle dynamics and aerodynamics.

국내 차기 다련장 로켓 개발방안에 대한 고찰 (A Study on the Development Method of the Domestic New Generation Multiple Launcher Rocket System)

  • 조기홍
    • 한국군사과학기술학회지
    • /
    • 제11권6호
    • /
    • pp.21-29
    • /
    • 2008
  • Korean army currently considers the development of the advanced MLRS(Multiple Launcher Rocket System) as a new alternative, which responses on the renovation of the artillery and future battle field environment. Therefore, This study suggests that the development methods of MLRS based on the analysis of the future battle field environment, world wide development trends of the MLRS and operation states of the domestic MLRS. According to this study, the development methods of new generation MLRS should be included a 230/130mm combined launcher competible with conventional 227mm on the vehicle, advanced FCS(Fire Control System), GPS/INS integration navigation system, Pod of ammunitiom, ammunition carrring vehicle and guided rocket munitions, etc.

특수폭탄의 비용대 효과분석에 관한 연구 (A Study OR the Cost-Effectiveness Analysis of Special Bomb)

  • 이종훈
    • 한국국방경영분석학회지
    • /
    • 제3권2호
    • /
    • pp.119-134
    • /
    • 1977
  • The goal of this study is to determine which is the better bomb; a general purpose bomb or a special bomb, from the point of view of cost-effectiveness of air munitions. What we call the special bomb is a laser guided bomb which adds a guidance control unit on the head of a general purpose bomb. Althrough their characteristics of explosion are the same, their effectivenesses are very defferent due to their probability of hitting the targets. Now, in order to measure their relative a effectiveness, we could select various enemy targets such as runway, radar, and then Ive could also calculate requirments of both bombs and firghter aircraft sorties according to the desired damage level of each target, Following above steps, we can derive the total costs and compare effectiveness. As a results of this study, when the attrition rate of aircraft is under $1.1\%$, the general purpose bomb is better than the laser guided bomb. Above $1.1\%$ attrition rate, we could say that luser guided bomb is the most economical bomb.

  • PDF