• Journal of Korea Multimedia Society
• /
• v.17 no.11
• /
• pp.1279-1285
• /
• 2014

In this paper, we propose on image encryption method which uses NC(Non-linear Cycle) and 2D CAT(Two-Dimensional Cellular Automata Transform) in sequence to encrypt medical images. In terms of the methodology, we use NC to generate a pseudo noise sequence equal to the size of the original image. We then conduct an XOR operation of the generated sequence with the original image to conduct level 1 NC encryption. Then we set the proper Gateway Values to generate the 2D CAT basis functions. We multiply the generated basis functions by the altered NC encryption image to conduct the 2nd level 2D CAT encryption. Finally, we verify that the proposed method is efficient and extremely safe by conducting an analysis of the key spatial and sensitivity analysis of pixels.

• MALSORI
• /
• no.47
• /
• pp.85-96
• /
• 2003

It is difficult to implement sound field effect on real time using linear convolution in time domain because linear convolution needs much multiply operations. In this paper three ways is introduced to reduce multiplication operations. Firstly, linear convolution in time domain is replaced with circular convolution in frequency domain. It means that it operates multiplication in place of convolution. Secondly, one frame will be divided into several frames. It will reduce the multiplication operation in processing that transforms time domain into frequency domain. Finally, QFT will be used in place of FFT. Three ways result much reduction in multiplication operations. The reduction of the multiplication operation makes the real time implementation possible.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.368-370
• /
• 2001

There are various shapes such as square, rectangular, L, and T type in the grounding systems of substations. IEEE St-d suggests the formula considering the characteristics of the various grounding systems but the final value can not be taken, and them the analysis of complicated computer program for obtaining the more accurate value is needed. In his paper, by using CDEGS(Current, Distribution, Electromagnetic and Soil Structure Analysis) the estimated functions derives form the modification coefficient for each of various types above mentioned. The mesh voltage expected can be obtained without the conventional expensive program using compensating methods that multiply IEEE formula by the estimated function.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2009

This paper proposes a 24-bit floating point multiply and accumulate(MAC) unit that can be used in geometry transformation process in 3D graphics. The MAC unit is composed of floating point multiplier and floating point accumulator. When separate multiplier and accumulator are used, matrix calculation, used in the transformation process, can't use continuous accumulation values. In the proposed MAC unit the accumulator can get continuous input from the multiplier and the calculation time is reduced. The MAC unit uses about 4,300 gates and can be operated at 150 MHz frequency.

• International Journal of Reliability and Applications
• /
• v.4 no.1
• /
• pp.41-50
• /
• 2003

This paper represents the first comprehensive comparison of the Newton-Raphson's method and Simple Iterative Procedure (SIP) in the maximum likelihood estimation of the two-parameter Weibull distribution. Computer simulation is employed to compare these two methods for multiply censored, singly censored data (Type I or Type Ⅱ censoring) and complete data. Results indicate the Newton-Raphson's with the Menon's estimated value, as an initial point remains the effective iterative procedure for estimating the parameters.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.2
• /
• pp.419-431
• /
• 2021

In this paper we discuss the classical problem of finding conditions on the entire coefficients A(z) and B(z) guaranteeing that all nontrivial solutions of f" + A(z)f' + B(z)f = 0 are of infinite order. We assume A(z) is an entire function of completely regular growth and B(z) satisfies three different conditions, then we obtain three results respectively. The three conditions are (1) B(z) has a dynamical property with a multiply connected Fatou component, (2) B(z) satisfies T(r, B) ~ log M(r, B) outside a set of finite logarithmic measure, (3) B(z) is extremal for Denjoy's conjecture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1627-1634
• /
• 2021

This paper introduces a low-power compact ADC circuit for analog Convolutional filter for low-power neural network accelerator SOC. While convolutional neural network accelerators can speed up the learning and inference process, they have drawback of consuming excessive power and occupying large chip area due to large number of multiply-and-accumulate operators when implemented in complex digital circuits. To overcome these drawbacks, we implemented an analog convolutional filter that consists of an analog multiply-and-accumulate arithmetic circuit along with an ADC. This paper is focused on the design optimization of a low-power 8bit SAR ADC for the analog convolutional filter accelerator We demonstrate how to minimize the capacitor-array DAC, an important component of SAR ADC, which is three times smaller than the conventional circuit. The proposed ADC has been fabricated in CMOS 65nm process. It achieves an overall size of 1355.7㎛², power consumption of 2.6㎼ at a frequency of 100MHz, SNDR of 44.19 dB, and ENOB of 7.04bit.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.2
• /
• pp.90-96
• /
• 2001

The development of network and the other communication-network can generate serious social problems. So. it is highly required to control security of network. These problems related security will be developed and keep up to confront with anti-security part such as hacking. cracking. In this paper. the proposed multiple nonlinear S-box function which is capable to cipher regardless of key distribution or key-length for these definite problem is proposed and designed in hardware. The proposed multiple nonlinear S-box function increase secret level from using a nonlinear function in multiply for key data utilized in cryptography that generates MDP and MLP in maximum is proposed to prevent cryptography analysis. The designed the multiple nonlinear S-box function in this paper performed synthesization and simulation using Synopsys Ver. 1999.10 and VHDL

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1438-1441
• /
• 2005

To establish of standard technique of nano-length measurement in 2D plane, new AFM system has been designed. In this system, measurement uncertainty is dominantly affected by the Abbe error of XY scanning stage. No linear stage is perfectly straight; in other words, every scanning stage is subject to tilting, pitch and yaw motion. In this paper, an AFM system with minimum offset of XY sensing is designed. And XY scanning stage is designed to minimize rotation angle because Abbe errors occur through the multiply of offset and rotation angle. To minimize the rotation angle optimal design has performed by maximizing the stiffness ratio of motion direction to the parasitic motion direction of each stage. This paper describes the design scheme of full AFM system, especially about XY stage. Full range of fabricated XY scanner is $100um\times{100um}$. And tilting, pitch and yaw motion are measured by autocollimator to evaluate the performance of XY stage. Using this AFM system, 3um pitch specimen was measured. As a result, the uncertainty of total system has been evaluated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.356-361
• /
• 1994

From the previous experimental test results, it has shown that shear that shear strength in lightweight concrete beams was about 85% on that in normal concrete beams. It is speculated that shear connectors in composite beams of steel and lightweight concrete associated with the longitudinal shear strength decrease more in strength than those in normal concrete. So this paper, as a study on strength of shear connectors in composite beams of steel and lightweight concrete slabs, has a purpose to compare the strength formula resulted from the push-out test of thirteen solid slab and four deck Plate slab with the established ones, and then to suggest a proper strength formula of the shear connectors. The established strength formula of the shear connectors is prescribed for $P_ps = 0.50A_s . \sqrt{f_C . E_C}$by AISC coed, but from the experimental test results the strength values of the shear connectors in lightweignt concrete slabs shows about 70% on those of the shear connectors in normal concrete slabs by AISC code. Therefore, as a strength formula this paper suggests to multiply the established strength formula by reduction factor$(\varphi=0.7)$.