• ETRI Journal
• /
• v.43 no.4
• /
• pp.717-727
• /
• 2021

In this study, new multiplier and adder method designs with multiplexers are proposed. The designs are based on quaternary logic and a carbon nanotube field-effect transistor (CNTFET). The design utilizes 4 × 4 multiplier blocks. Applying specific rotational functions and unary operators to the quaternary logic reduced the power delay produced (PDP) circuit by 54% and 17.5% in the CNTFETs used in the adder block and by 98.4% and 43.62% in the transistors in the multiplier block, respectively. The proposed 4 × 4 multiplier also reduced the occupied area by 66.05% and increased the speed circuit by 55.59%. The proposed designs are simulated using HSPICE software and 32 nm technology in the Stanford Compact SPICE model for CNTFETs. The simulated results display a significant improvement in the fabrication, average power consumption, speed, and PDP compared to the current bestperforming techniques in the literature. The proposed operators and circuits are evaluated under various operating conditions, and the results demonstrate the stability of the proposed circuits.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.610-613
• /
• 2014

본 연구에서는 Dyson사의 Air multiplier의 Coanda surface각도에 따른 Air foil 주변의 2차원 유동을 분석하고 Surface각도가 유동에 미치는 영향에 대해 해석하였다. Air multiplier 단면의 작은 Slit을 통해 분류된 공기는 Venturi effect에 의해 가속되며 Coanda effect에 의해 단면을 따라 흐르며 압력차를 발생시켜 주변의 공기를 추가적으로 유입시킨다. EDISON CFD를 이용하여 Surface 각도에 따른 Air foil 주변의 유동을 구현하고 각도가 유동에 미치는 영향을 해석하였다. 또한 다른 논문에서 발췌한 실험값과 CFD 분석을 통해 얻은 값을 비교하여 CFD분석이 유효한지 확인하였다.

• Environmental and Resource Economics Review
• /
• v.18 no.4
• /
• pp.637-652
• /
• 2009

We measure and compare inducements of energy consumption in different industry sectors using inter-industry input and output tables of 1995, 2000 and 2005. We also compute the multiplier effects that relate to the directions of future economic effects. Key Findings are as follows. First, we observe continues decreasing linkage effects in all industries over period of 1995 to 2007. Second, backward multiplier of energy consumption were highest in the material related industry and chemical industry. As for inter-industry inducements, the indirect backward multipliers were high in the other industry. Third, the forward multiplier effect of energy consumption were as same as the backward multiplier effect's sectors. The indirect forward multipliers, however, were highest in the material related industry and chemical industry. The above findings show that since implementing pro-environmental policy in 2000s, the industries structure for reducing energy consumption has been transformed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.877-883
• /
• 2009

Shaking table tests are performed to evaluate the dynamic group pile effect in fine sand. Single pile tests and $2{\times}4$ group pile tests are performed on 3D pile spacing. Dynamic p-y backbone curves are obtained to evaluate dynamic group pile effect by using dynamic p-y curve of single pile. And dynamic group pile p-multiplier is estimated by dynamic p-y backbone curve. Dynamic p-multiplier can be calculated by using subground reaction ratio of dynamic p-y backbone curve which is the same displacement of p-y curve peak point As the result, dynamic group pile effects are evaluated in terms of a shaking frequency, a shaking acceleration, and a relative density. Dynamic group pile p-multiplier is the largest at lead pile, and the value decrease at middle pile and trail pile. p multiplier increases as increasing input acceleration and decreasing relative density. This results coincide with NCHRP's research which suggest p multiplier increases as increasing pile cap displacement.

• Economic Analysis
• /
• v.27 no.3
• /
• pp.33-60
• /
• 2021

This study estimates the fiscal multiplier using Input-Output table panel data from year of 2010 to 2018. Considering the endogeneity of the government expenditure, this study uses the share of government expenditure by sector in the initial period as an instrument variable. The estimation from the panel fixed effect instrumental variables model shows that the estimate for the current period of government expenditure is 1.15~1.22 and the estimate for the cumulative multiplier is 1.23~1.32 depending on the method of controlling time trend. Since the general equilibrium effect absorbed by the time-fixed effect in the estimation equation, the estimated multiplier in this study may be different from the multiplier of the economy as a whole. The general equilibrium effect depends on the response of monetary policy, changes in tax policy, and interaction between sectors.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.99-109
• /
• 2004

Key goal of the study is to analyze the economical ripple effect by the digital contents industry. In this study, the results of analysis of multiplier effects of digital contents industry can be summaries as follows: (1) Output multiplier for the manufacturing sector was the highest with value of 3.0509 while that of digital contents industry is the lowest at 1.6511. (2) Employment multiplier is the lowest for the manufacturing sector with value of 4.2895, while that of digital contents industry is the lowest with value of 1.0238. (3) Income multiplier is the lowest for the manufacturing sector with value of 5.3331, while that of digital contents industry is the lowest with value of 1.0081. Therefore, digital contents industry is clearly a new-growth power industry in the future rather than in the present.

• 사회경제평론
• /
• v.31 no.2
• /
• pp.1-38
• /
• 2018

In this study we attempt to quantify the export multiplier to definitively show how exports have undergirded the Korean economy and doing so we will describe how the export multiplier effect has diminished since the global financial crisis in 2008. We also argue that a trend of disinclination in the marginal propensity to consume, one of the determinants of the multiplier, has played an important role in its contraction. In this new, alien economic environment, the kinds of policies that once buttressed the export-led growth strategy of the halcyon days require immediate revision. More policies should implemented that bolster domestic demand, especially consumption, rather than continuing efforts to facilitate supply side-based growth through export-friendly policies.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.4 s.55
• /
• pp.831-842
• /
• 1996

Demand for high quality medical care has recently been increasing in step with high level of income and education. Patients prefer the use of large general hospitals to small community hospitals. Large hospitals, usually located at urban area, expand their capacities to cope with the increasing demand, therefore, they easily secure revenue necessary for growth and development of hospitals. However, small community hospitals are facing with serious financial difficulties caused from the reduction of patients in one hand and the inflation of cost in another. If small rural hospitals were closed, the closure would have negative impacts on local economies in addition to the decrease in access to medical care. Community leaders should have an insight on the contribution of community hospitals to local economies. They could make a rational decision on the hospital closure only with the understanding of hospital's contribution to the community. This study is designed to develop an economic model to estimate the contribution of rural hospital to local economies, and also to apply this model with a specific hospital. The contribution of a hospital to local economies consists of two elements, direct effect and multiplier effects. The direct impacts include hospital's local purchasing power, employee's local purchasing power, and the consumption of patients coming from outside the community. The direct impact induces multiplication effect in the local economy. The seed money invested to other industries grows through economic activities in the region. This study estimated the direct effect with the data of expenditure of the case hospital. The total effect was calculated by multiplied the direct effect with a multiplier. The multiplier was drown from the ratio of marginal propensity of income and expenditure. Beside the estimation of the total impacts, the economic effect from the external resources was also analyzed by the use of the ratio of patients coming outside the region. The results are as follows. 1. The direct economic contribution of the hospital to the local economy is 1,104 million won. 2. The value of multiplier in the region is 2.976. 3. The total economic effect is 3,286 million won, and the multiplication effect is 2,182 million won. 4. The economic contribution from the external resources is 245 million won which is 7.5% of the total economic effect.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.567-578
• /
• 2018

In this study, to investigate the effect of the stress reduction of group piles by dynamic loading, a dynamic p-y curve was established and the dynamic p-multiplier was calculated. Dynamic numerical analysis was performed by input sinusoidal waves to the bottom of the pile - ground system for $2{\times}2$ group pile, single pile and $5{\times}5$ group pile, single pile in dry sandy soil, and the pile spacing was changed to 2.5 and 5.0 times of the pile diameter. By establishing and comparing the dynamic p-y curves of the single pile and group piles, the dynamic group pile effect of the piles according to the pile center spacing and row position of the group pile piles is analyzed. $5{\times}5$ showed symmetry of the dynamic P-multiplier value around the pile origin coordinate. The dynamic p-multiplier value at the single pile, $5{\times}5$ pile (pile spacing: 2.5D) is 0.26 ~ 0.30 at the pile number 3, pile number 23, 0.14 pile number 13, and 0.14 ~ 0.38 at the pile number 5, pile number 18. These values differed from the static p-multiplier, especially due to the different loading conditions. The dynamic p-multiplier ($P_{dm}$) estimation through various types of input dynamic loads is expected to be used for dynamic design and analysis of group pile-ground systems of civil foundation structures.

• Health Policy and Management
• /
• v.9 no.4
• /
• pp.65-86
• /
• 1999

In this study, we investigate the welfare effect of mandatory prescription(MP) in Korea. An immediate effect of MP is the increase in the implicit price of prescribed medicine, which could be obtained easily from drug stores before MP. This will lower the quantity demanded. which will in turn reduce the abuse of drugs. The key to the cost-benefit analysis of MP, therefore, should be focused on this point; price increase in the cost side and quantity decrease in the benefit side. Since we do not have as much information as needed for the analysis, however, we made strong assumptions for the clarity of numbers; the severity of moral hazard of medical doctors related to the sales of hospital drugs, constant demand elasticity, constant benefit multiplier of reduced drug usage, and so on, With these rather strong assumptions, we find that i) the benefit side is much more sensitive to demand elasticity than the cost side effect ii) the larger the demand elasticity, the greater the size of net gain of MP, though the result depends on the size of the benefit multiplier. This analysis shows that we need to have more information on the specific institutional path of health benefit diffusion caused by the reduction of drug usage, which was the major target of MP.