• Title/Summary/Keyword: Multiple-Ring Topology

Search Result 9, Processing Time 0.024 seconds

Distributed Construction of the Multiple-Ring Topology of the Connected Dominating Set for the Mobile Ad Hoc Networks: Boltzmann Machine Approach (무선 애드혹 망을 위한 연결 지배 집합 다중-링 위상의 분산적 구성-볼츠만 기계적 접근)

  • Park, Jae-Hyun
    • Journal of KIISE:Information Networking
    • /
    • v.34 no.3
    • /
    • pp.226-238
    • /
    • 2007
  • In this paper, we present a novel fully distributed topology control protocol that can construct the multiple-ring topology of Minimal Connected Dominating Set (MCDS) as the transport backbone for mobile ad hoc networks. It makes a topology from the minimal nodes that are chosen from all the nodes, and the constructed topology is comprised of the minimal physical links while preserving connectivity. This topology reduces the interference. The all nodes work as the nodes of the distributed parallel Boltzmann machine, of which the objective function is consisted of two Boltzmann factors: the link degree and the connection domination degree. To define these Boltzmann factors, we extend the Connected Dominating Set into a fuzzy set, and also define the fuzzy set of nodes by which the multiple-ring topology can be constructed. To construct the transport backbone of the mobile ad hoc network, the proposed protocol chooses the nodes that are the strong members of these two fuzzy sets as the clusterheads. We also ran simulations to provide the quantitative comparison against the related works in terms of the packet loss rate and the energy consumption rate. As a result, we show that the network that is constructed by the proposed protocol has far better than the other ones with respect to the packet loss rate and the energy consumption rate.

An Algorithm for Design of a Multiple Ring Network Using ROADM in WDM Mesh Networks (WDM Mesh 네트워크에서 ROADM을 이용한 멀티플-링 네트워크 설계 방안)

  • Kim, Eal-Lae;Lee, Sung-Kuen;Lim, Tae-Hyung;Lee, Myung-Moon;Park, Jin-Woo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.11B
    • /
    • pp.663-672
    • /
    • 2007
  • This paper proposes an algorithm for design of a multiple ring network that can be applied to an arbitrary topology in the WDM optical transport networks. Especially, we suggest an integer linear program(ILP) formulation with the objective of minimizing the total cost of nodes based on the reconfigurable OADM(ROADM) architecture and propose a heuristic algorithm to reduce computational complexity of the exact problem formulation. To evaluate the performance and validity of this scheme, we applied it to an NSFnet topology assuming the dynamic or static traffic condition and compared it with a mesh methodology about capacity of connection requests and the total cost of the nodes.

Protection and restoration path calculation method in T-SDN (Transport SDN) based on multiple ring-mesh topology (다중링-메시 토폴로지 기반 T-SDN(Transport SDN)에서 보호·복구 경로 계산 방식)

  • Hyuncheol Kim
    • Convergence Security Journal
    • /
    • v.23 no.1
    • /
    • pp.3-8
    • /
    • 2023
  • Multi-domain optical transport networks are not fundamentally interoperable and require an integrated orchestration mechanism and path provision mechanism at the entire network level. In addition, ensuring network survivability is one of the important issues. MPLS-TP (Multi-Protocol Label Switching-Transport Profile) defines various protection/recovery methods as standards, but does not mention how to calculate and select protection/recovery paths. Therefore, an algorithm that minimizes protection/recovery collisions at the optical circuit packet integrated network level and calculates and sets a path that can be rapidly protected/recovered over the entire integrated network area is required. In this paper, we proposed an algorithm that calculates and sets up a path that can be rapidly protected and restored in a T-SDN network composed of multiple ring-mesh topology.

A Structured Overlay Network Scheme Based on Multiple Different Time Intervals

  • Kawakami, Tomoya
    • Journal of Information Processing Systems
    • /
    • v.16 no.6
    • /
    • pp.1447-1458
    • /
    • 2020
  • This paper describes a structured overlay network scheme based on multiple different time intervals. Many types of data (e.g., sensor data) can be requested at specific time intervals that depend on the user and the system. These queries are referred to as "interval queries." A method for constructing an overlay network that efficiently processes interval queries based on multiple different time intervals is proposed herein. The proposed method assumes a ring topology and assigns nodes to a keyspace based on one-dimensional time information. To reduce the number of forwarded messages for queries, each node constructs shortcut links for each interval that users tend to request. This study confirmed that the proposed method reduces the number of messages needed to process interval queries. The contributions of this study include the clarification of interval queries with specific time intervals; establishment of a structured overlay network scheme based on multiple different time intervals; and experimental verification of the scheme in terms of communication load, delay, and maintenance cost.

WDM Optical Network Restoration and Spare Resource Planning using Multiple Ring-Cover (다중 링 구조를 이용한 WDM 통신망 복구 및 자원 예약 기법)

  • Hwang, Ho-Young;Lim, Sung-Soo
    • The KIPS Transactions:PartC
    • /
    • v.12C no.6 s.102
    • /
    • pp.891-900
    • /
    • 2005
  • This paper studies network recovery methods for WDM optical mesh networks, concentrating on improving spare resource utilization. The resource efficiency can be obtained by sharing spare resources needed for network recovery. To improve the sharability of spare resources in WDM networks, methods to share backup paths us well as spare capacity should be studied. The proposed method in this paper uses multiple ring-covers and this method provides fast and simple recovery operation by exploiting the characteristics of logical ring topology, and also provides efficient resource utilization by using multiple distributed backup paths to improve the sharability of overall spare resources in the networks. This method can provide layered reliability to network service by enabling hierarchical robustness against multiple failures. The performance results show that the proposed method provide improved resource efficiency for single failure and enhanced robustness for multiple failures.

Analysis of Spare Capacity Ratio in Optical Internet using Cut-Set (광인터넷망에서 Cut-Set을 이용한 예비대역폭 비율 분석)

  • Kim, Taehyoun;Hwang, Hoyoung
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.12 no.5
    • /
    • pp.197-203
    • /
    • 2012
  • This paper studies network recovery method using logical multiple ring architecture embedded in WDM optical Internet environment. The multiple ring-based recovery method provides fast and simple network restoration operation, and performs local recovery that is detouring the failed link. The multiple ring architecture can provide higher resource efficiency by sharing the backup routes and reducing the number of spare wavelengths. This paper calculates the required spare capacity ratio using Cut-Sets in the given network topology and performs simulation for comparative analysis.

Using Minimal Path Sets for the Evaluation of the Reliability of DRDT Interconnection $Networks^+$

  • Lim , Hae-Hak;Lee, Chong-Hyung;Cho, Byung-Yup
    • Journal of Korean Society for Quality Management
    • /
    • v.28 no.1
    • /
    • pp.105-118
    • /
    • 2000
  • In this paper, we consider an interconnection network, DRDT (Dual Receive Dual Transmit), that is a double-loop ring topology and adopts the concept of multiple packets transmission. For three types of DRDT configurations, we investigate some properties related to path sets and discuss the method for finding minimal path sets. Using the concept of the terminal reliability and the path sets approach, we evaluate the reliability of the DRDT networks and compare them with a single ring network and a unidirectional double-loop ring network.

  • PDF

Communications Protocol Used in the Wireless Token Rings for Bird-to-Bird

  • Nakajima, Isao;Juzoji, Hiroshi;Ozaki, Kiyoaki;Nakamura, Noboru
    • Journal of Multimedia Information System
    • /
    • v.5 no.3
    • /
    • pp.163-170
    • /
    • 2018
  • We developed a multicast communication packet radio protocol using a time-sharing tablet system ("wireless token ring") to achieve the efficient exchange of files among packet radio terminals attached to swans. This paper provides an overview of the system and the protocol of the packet communications. The packet device forming the main part of the transceiver developed is the Texas Instruments CC2500. This device consists of one call-up channel and one data transmission channel and could improve error frame correction using FEC (forward error correction) with 34.8 kbps MSK and receiving power of at least -64 dBm (output 1 dBm at distance of 200 m using 3 dBi antenna). A time-sharing framework was determined for the wireless token ring using call sign ordinals to prevent transmission right loss. Tests using eight stations showed that resend requests with the ARQ (automatic repeat request) system are more frequent for a receiving power supply of -62 dBm or less. A wireless token ring system with fixed transmission times is more effective. This communication protocol is useful in cases in which frequency resources are limited; the energy consumed is not dependent on the transmission environment (preset transmission times); multiple terminals are concentrated in a small area; and information (position data and vital data) is shared among terminals under circumstances in which direct communication between a terminal and the center is not possible. The method allows epidemiological predictions of avian influenza infection routes based on vital data and relationships among individual birds based on the network topology recorded by individual terminals. This communication protocol is also expected to have applications in the formation of multiple in vivo micromachines or terminals that are inserted into living organisms.

Topology of High Speed System Emulator and Its Software (초고속 시스템 에뮬레이터의 구조와 이를 위한 소프트웨어)

  • Kim, Nam-Do;Yang, Se-Yang
    • The KIPS Transactions:PartA
    • /
    • v.8A no.4
    • /
    • pp.479-488
    • /
    • 2001
  • As the SoC designs complexity constantly increases, the simulation that uses their software models simply takes too much time. To solve this problem, FPGA-based logic emulators have been developed and commonly used in the industry. However, FPGA-based logic emulators are facing with the problems of which not only very low FPGA resource usage rate due to the very limited number of pins in FPGAs, but also the emulation speed getting slow drastically as the complexity of designs increases. In this paper, we proposed a new innovative emulation architecture and its software that has high FPGA resource usage rate and makes the emulation extremely fast. The proposed emulation system has merits to overcome the FPGA pin limitation by pipelined ring which transfers multiple logic signal through a single physical pin, and it also makes possible to use a high speed system clock through the intelligent ring topology. In this topology, not only all signal transfer channels among EPGAs are totally separated from user logic so that a high speed system clock can be used, but also the depth of combinational paths is kept swallow as much as possible. Both of these are contributed to achieve high speed emulation. For pipelined singnals transfer among FPGAs we adopt a few heuristic scheduling having low computation complexity. Experimental result with a 12 bit microcontroller has shown that high speed emulation possible even with these simple heuristic scheduling algorithms.

  • PDF