• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.20-25
• /
• 2009

The maximum likelihood detection with QR decomposition and M-algorithm (QRM-MLD) has been presented as a suboptimum multiple-input multiple-output (MIMO) detection scheme which can provide almost the same performance as the optimum maximum likelihood (ML) MIMO detection scheme but with the reduced complexity. However, due to the lack of parallelism and the regularity in the decoding structure, the conventional QRM-MLD which uses the tree-structure still has very high complexity for the very large scale integration (VLSI) implementation. In this paper, we modify the tree-structure of conventional QRM-MLD into trellis-structure in order to obtain high operational parallelism and regularity and then apply the Viterbi algorithm to the QRM-MLD to ease the burden of the VLSI implementation.We show from our selected numerical examples that, by using the QRM-MLD with our proposed trellis-structure, we can reduce the complexity significantly compared to the tree-structure based QRM-MLD while the performance degradation of our proposed scheme is negligible.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.21-26
• /
• 2013

In this paper we propose a system where we divide the group with 2 symbols. The two added symbols are separated by multiplexing and later added using the DE-multiplexing technique. In our proposed system a simple Partial Interference Cancelation (PIC) group decoding scheme is used for Double-ABBA(D-ABBA) Quasi-Orthogonal Space Time Code, which reduces the decoding complexity for the higher order Multiple Input Multiple Output (MIMO) space time block coding. Finally we compare the proposed scheme performance using the different modulation schemes.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.307-312
• /
• 2005

In this work, we study the performance of a serial concatenated scheme comprising a convolutional code (CC) and an orthogonal space-time block code (STBC) separated by an inter-leaver. Specifically, we derive performance bounds for this concatenated scheme, clearly quantify the impact of using a CC in conjunction with a STBC, and compare that to using a STBC code only. Furthermore, we examine the impact of performing antenna selection at the receiver on the diversity order and coding gain of the system. In performing antenna selection, we adopt a selection criterion that is based on maximizing the instantaneous signal-to­noise ratio (SNR) at the receiver. That is, we select a subset of the available receive antennas that maximizes the received SNR. Two channel models are considered in this study: Fast fading and quasi-static fading. For both cases, our analyses show that substantial coding gains can be achieved, which is confirmed through Monte-Carlo simulations. We demonstrate that the spatial diversity is maintained for all cases, whereas the coding gain deteriorates by no more than $10\;log_{10}$ (M / L) dB, all relative to the full complexity multiple-input multiple-output (MIMO) system.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.130-139
• /
• 2010

Environmental issues and the need to reduce energy consumption for lowering operating costs have pushed power efficiency to become one of the major issues of current research in the field of wireless networks. This paper addresses a number of multiple input multiple output (MIMO) precoding and scheduling techniques across the PHY and MAC layers that can operate under a reduced link budget and collectively improve the transmit power efficiency of a base station, while maintaining the same levels of service. Different MIMO transmission and precoding schemes proposed for LTE, achieving varying degrees of multiuser diversity in both the time, frequency as well as the space domain, are examined. Several fairness-aware resource allocation algorithms are applied to the considered MIMO schemes and a detailed analysis of the tradeoffs between power efficiency and quality of service is presented. This paper explicitly examines the performance of a system serving real-time, VoIP traffic under different traffic loading conditions and transmit power levels. It is demonstrated that by use of efficient scheduling and resource allocation techniques significant savings in terms of consumed energy can be achieved, without compromising QoS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1C
• /
• pp.37-47
• /
• 2011

In this paper, we propose a novel ML decoding scheme based on the combination of depth- and breadth-first search methods on a partitioned tree for multiple input multiple output systems. The proposed scheme first partitions the searching tree into several stages, each of which is then searched by a depth- or breadth-first search method, possibly exploiting the advantages of both the depth- and breadth-first search methods in an organized way. Numerical results indicate that, when the depth- and breadth-first search algorithms are adopted appropriately, the proposed scheme exhibits substantially lower computational complexity than conventional ML decoders while maintaining the ML bit error performance.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.186-193
• /
• 2008

A two-hop multiple-input multiple-output (MIMO) relay network which comprises a multiple antenna source, an amplify-and-forward MIMO relay and many potential users are studied in this paper. Consider the achievable sum rate as the performance metric, a joint design method for the processing units of the BS and relay node is proposed. The optimal structures are given, which decompose the multiuser MIMO relay channel into several parallel single-input single-output relay channels. With these structures, the signal-to-noise ratio at the destination users is derived; and the power allocation is proved to be a convex problem. We also show that high sum rate can be achieved by pairing each link according to its magnitude. The sum rate of three broadcast strategies, time division multiple access (TDMA) to the strongest user, dirty paper coding (DPC), and beamforming (BF) are investigated. The sum rate bounds of these strategies and the sum capacity (achieved by DPC) gain over TDMA and BF are given. With these results, it can be easily obtained that how far away TDMA and BF are from being optimal in terms of the achievable sum rate.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.53-60
• /
• 2013

In this paper, the new multi-beamforming is proposed for Multiple-input multiple-output (MIMO) Multicarrier-Code division multiple access(MC-CDMA) systems to overcome the decrease of performance due to multiuser interference and multiple-antenna interference. Installing the number of multi-beamformer which is equal to the number of multi-transmitter antennas and exploiting the proposed approach at the receiver of MIMO MC-CDMA, the multi-beams are formed toward each multi-antenna of desired user and null beam are formed to other interference. Therefore, the performance of MIMO MC-CDMA system is improved as removing the interference signal. BER performance improvement is investigated through computer simulation by the proposed approach to MIMO MC-CDMA system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.19-24
• /
• 2015

We introduce an optimization of the number of base station antennas in massive multiple-input multiple-output (MIMO) wireless powered communication network (WPCN). We use channel hardening property of massive MIMO system to approximate channel gain in terms of the number of base station antennas. Then, we find an optimal solution by partial differential and obtain a closed form solution by using Lambert-W function. The simulation results show that the approximation and the method of solving the optimization problem are reasonable, and the optimal solution of proposed scheme is almost identical to the optimal number of base station antennas by the exhaustive search method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.173-180
• /
• 2009

It is difficult to predict non-stationary or chaotic time series which includes the drift and/or the non-linearity as well as uncertainty. To solve it, we propose an effective prediction method which adopts data preprocessing and multiple model TS fuzzy predictors combined with model selection mechanism. In data preprocessing procedure, the candidates of the optimal difference interval are determined based on the correlation analysis, and corresponding difference data sets are generated in order to use them as predictor input instead of the original ones because the difference data can stabilize the statistical characteristics of those time series and better reveals their implicit properties. Then, TS fuzzy predictors are constructed for multiple model bank, where k-means clustering algorithm is used for fuzzy partition of input space, and the least squares method is applied to parameter identification of fuzzy rules. Among the predictors in the model bank, the one which best minimizes the performance index is selected, and it is used for prediction thereafter. Finally, the error compensation procedure based on correlation analysis is added to improve the prediction accuracy. Some computer simulations are performed to verify the effectiveness of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2275-2284
• /
• 2015

In this paper, the Walsh coded orthogonal training signals for 4 × 4 multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) systems are designed and the channel estimation equations are derived as a closed form, taking account of the inter training signal interference problems caused by the multi-path delayed signals. The performances of the proposed channel estimation method are analyzed and compared with the conventional methods[9,14] by using computer simulation. The simulation results show that the proposed methods has better performances, compared with the conventional methods[9,14]. As a result, the proposed method can be used for MIMO-OFDM systems with null sub-carriers.