• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.116-125
• /
• 2014

In this paper, we investigate an inventory and production system in a three-layer supply chain system involving a single supplier, single manufacturer and multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce single item, but we consider raw materials in order to produce multiple items. It is assumed that the cycle time at each stage is an integer multiple of the adjacent downstream stage. We develop an iterative solution procedure to find the order quantity for the multiple items and raw materials that minimizes the supply chain-wide total cost per unit time of the supplier and manufacturer's raw materials ordering and holding, setup and finished items holding, the retailer's ordering and inventory holding. Numerical examples are presented to show that the proposed heuristic gives good performance.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1840-1841
• /
• 2007

To the Boundary Scan, this architecture in Scan testing of design under the control of boundary scan is used in boundary scan design to support the internal scan chain. The internal scan chain has single scan-in port and single scan-out port that multiple scan chain cannot be used. Internal scan design has multiple scan chains, those chains must be stitched to form a scan chain as this paper. We propose an efficient Boundary Scan test structure for multiple clock testing in design.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1850-1851
• /
• 2007

To the Boundary Scan, this architecture in Scan testing of design under the control of boundary scan is used in boundary scan design to support the internal scan chain. The internal scan chain has single scan-in port and single scan-out port that multiple scan chain cannot be used. Internal scan design has multiple scan chains, those chains must be stitched to form a scan chain as this paper. We propose an efficient Boundary Scan test structure for multiple clock testing in design.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.980-986
• /
• 2007

Boundary scan test structure(JTAG IEEE 1149.1 standard) that supports an internal scan chain is generally being used to test CUT(circuit under test). Since the internal scan chain can only have a single scan-in port and a single scan-out port; however, existing boundary test methods can not be used when multiple scan chains are present in CUT. Those chains must be stitched to form a single scan chain as shown in this paper. We propose an efficient boundary scan test structure that adds a circuit called Clock Group Register(CGR) for multiple clocks testing within the design of multiple scan chains. The proposed CGR has the function of grouping clocks. By adding CGR to a previously existing boundary scan design, the design is modified. This revised scan design overcomes the limitation of supporting a single scan-in port and out port, and it bolsters multiple scan-in ports and out ports. Through our experiments, the effectiveness of CGR is proved. With this, it is possible to test more complicated designs that have high density with a little effort. Furthermore, it will also benefit in designing those complicated circuits.

• Industrial Engineering and Management Systems
• /
• v.3 no.1
• /
• pp.38-51
• /
• 2004

Over the years, most or many companies have focused their attention to the effectiveness and efficiency of their business units. As a new way of doing business, these companies have begun to realize the strategic importance of planning, controlling, and designing their own supply chain system. This paper analyzes the coordination issues in supply chains that consist of one manufacturer and multiple retailers operating under uncertain end customer demand and delivery lead-time. We use the Genetic Algorithm (GA) to determine the appropriate ordering and inventory level at which the manufacturer and multiple retailers can maximize the profit of the chain. This is performed under three controlling policies: the traditionally centralized controlling policy under the manufacturer's perspective, the entire chain’s perspective, and lastly the coordinating controlling policy with an incentive scheme. The outcome from the study reveals that the coordinating controlling policy with an incentive scheme can outperform the traditional centralized controlling policies by creating a win-win situation in which all members of the chain benefit from higher profit, thus resulting in more willingness from all members to join the chain.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.2
• /
• pp.21-35
• /
• 2014

As productions and deliveries of multiple products to multiple marketplaces have been increasingly popular, supply chain flexibility, which refers to an ability to deal with demand and capacity uncertainty, becomes an important issue in supply chain management. However, logistics costs have been largely neglected in the literature on supply chain flexibility structure. In this paper, we propose mathematical models to investigate the impact of the logistics costs on the optimal flexibility structure. We also conduct a simulation study and observe that logistics costs have a significant impact on the decision on supply chain flexibility structure. Such conclusion is also supported by the case study of a global car manufacturer, Honda Motors.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.104-107
• /
• 2007

In this paper, we propose the coordination scheme in a single-manufacturer-multiple-retailer supply chain system. Traditionally, the bargaining power of the single manufacturer is superior to those of retailers. The business environment supported by the e-business scheme may give rise to new business behavior. The multitude of retailer requests the manufacturer to relax the his unilateral lot-sizing policy while they are willing to compensate more than the manufacturer's expected loss caused by abandon his superior bargaining power. The side payment aggregated by the multiple retailers is transferred to the manufacturer according to the degree of the manufacturer's relaxation from the current unilateral lot-sizing policy.

• ETRI Journal
• /
• v.45 no.3
• /
• pp.394-403
• /
• 2023

Direct tracking problem of moving noncircular sources for multiple arrays is investigated in this study. Here, we propose an improved unscented particle filter (I-UPF) direct tracking method, which combines system proportional symmetry unscented particle filter and Markov Chain Monte Carlo (MCMC) algorithm. Noncircular sources can extend the dimension of sources matrix, and the direct tracking accuracy is improved. This method uses multiple arrays to receive sources. Firstly, set up a direct tracking model through consecutive time and Doppler information. Subsequently, based on the improved unscented particle filter algorithm, the proposed tracking model is to improve the direct tracking accuracy and reduce computational complexity. Simulation results show that the proposed improved unscented particle filter algorithm for noncircular sources has enhanced tracking accuracy than Markov Chain Monte Carlo unscented particle filter algorithm, Markov Chain Monte Carlo extended Kalman particle filter, and two-step tracking method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.1023-1032
• /
• 1995

The multiple cooperating robot system plays an important role in the research of modern manufacturing system as the emphasis of production automation is more on the side of flexibility than before. While the kinematic and dynamic analysis of a single robot is performed as an open-loop chain, the dynamic formulation of robot in a multiple cooperating robot system differs from that of a single robot when the multiple cooperating robots form a closed kinematic chain holding an object simultaneously. The object may be any type from a rigid body to a multi-joint linkage. The mobility of the system depends on the kinematic configuration of the closed kinematic chain formed by robots and object, which also decides the number of independent input parameters. Since the mobility is not the same as the number of robot joints, proper constraint condition is sought. The constraints may be such that : the number of active robot joints is kept the same as mobility, all robot joints are active and have interrelations between each joint forces/torques, two robots have master-slave relation, or so on. The dynamic formulation of system is obtained. The formulation is based on recursive dual-number screw-calculus Newton-Eulerian approach which has been used for single robot analysis. This new scheme is recursive and compact symbolically and may facilitate the consideration of the object in real time.

• Culinary science and hospitality research
• /
• v.13 no.4
• /
• pp.107-118
• /
• 2007

This research aimed to understand the relationship between comparative superiority elements of the supply chain activities for food supplies in the hotel industry. The samples are obtained from exclusive hotels located in the Seoul area. A statistic package program called SPSS was employed to conduct reliability analysis, factor analysis, t-test, correlation analysis, and multiple regression analysis. Results of a multiple regression analysis between supply chain management and food production strategies were as follows; company's characters and cooperative relations with suppliers had a significant impact on cost while quality was significantly affected by company's characters, information system, cooperative relations with suppliers, and supply chain activities. It was revealed that all factors had a significant impact on flexibility and delivery date.