• International Journal of Control, Automation, and Systems
• /
• v.2 no.2
• /
• pp.144-155
• /
• 2004

This paper addresses the issue of position control of a chain of multiple mass-spring-damper (CMMSD) units which can be found in many physical systems. The dynamic model of a CMMSD system with any degrees of freedom is expressed in a closed-form for the convenience of the controller design. Backstepping and model reference adaptive control (MRAC) approaches are then used to develop two adaptive output feedback controllers to control the position of a CMMSD system. The proposed controllers rely on the measurements of the input (force) and the output (position of the mass unit at the end of the chain) of the system without the knowledge of its parameters and internal states. Simulations are used to verify the effectiveness of the controllers

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.27-35
• /
• 2008

A navigation system is one of the important components of an unmanned ground vehicle (UGV). A GPS receiver collects data signals transmitted by (Earth orbiting) satellites. However, these data signals may contain many errors resulting misinformation and depending on one's position (environment), reception may be impossible. The proposed self-driven algorithm uses three low-cost GPS in order to minimize errors of existing inexpensive single GPS's driving algorithm. By using reliable final data, which is analyzed and combined from each of three GPS's received data signals, gathering a vehicle's steering performance information and its current pin-point position is improved even with error containing signals or from a place where signal gathering is impossible. The purpose of this thesis is to explain navigation system algorithm using multiple GPS and compass sensor and prove the algorithm through experiments.

• The Journal of Korea Robotics Society
• /
• v.2 no.2
• /
• pp.183-190
• /
• 2007

The most important thing for navigation of a mobile robot is to find the most suitable path and avoid the obstacles in the static and dynamic environment. This paper presents a method to search the optimal path in start space extended to time domain with considering a velocity and a direction of moving obstacles. A modified version of $A^*$ algorithm has been applied for path planning in this work and proposed a method of path search to avoid a collision with moving obstacle in space-tim domain with a velocity and an orientation of obstacles. The velocity and the direction for moving obstacle are assumed as linear form. The simulation result shows that a mobile robot navigates safely among moving obstacles of constant linear velocity. This work can be applied for not only a moving robot but also a legged humanoid robot and all fields where the path planning is required.

• The Journal of Korea Robotics Society
• /
• v.5 no.3
• /
• pp.262-269
• /
• 2010

This paper presents a probabilistic head tracking method, mainly applicable to face recognition and human robot interaction, which can robustly track human head against various variations such as pose/scale change, illumination change, and background clutters. Compared to conventional particle filter based approaches, the proposed method can effectively track a human head by regularizing the sample space and sequentially weighting multiple visual cues, in the prediction and observation stages, respectively. Experimental results show the robustness of the proposed method, and it is worthy to be mentioned that some proposed probabilistic framework could be easily applied to other object tracking problems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.7
• /
• pp.582-588
• /
• 2001

The Multiple Model/Controller IMC(MMC-IMC) is a model-based control method which uses a set of model/controller pairs rather than a single model/controller to handle all possible operating conditions in the IMC control structure. During operation, one model/controller pair that best fit, for current plant situation is chosen by the switching algorithm. The major drawback of the switching controller is the bad transient performance due to the model error and the use fo linear controller for nonlinear plants. In this paper, we propose a method that transient response of the MMC-IMC using two recurrent neural networks. Simulation result shows that the proposed method represents better performance than the usual MMC-IMC`s.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.1
• /
• pp.50-57
• /
• 1995

In this paper, the design and the implementation of the controller for an articulate robot, which is developed in our Automatic Control Laboratory, are mainly discussed. The controller reduces software computational load via distributed processing method using multiple CPU's, and simplifies structures by the time-division control with TMS320C31 DSP chip. The method of control is based on the fuzzy-compensated PID control with scale factor, which compensates for the influence of load variation resulting from the various postures of the robot with conventional PID scheme. The application of the proposed controller to the robot system with DC servo-motors shows some excellent control capabilities. Also, the response characteristics of system for the various trajectory commands verify the superiority of the controller.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.803-812
• /
• 2000

In this paper we introduce a model based centralized hierarchical controller for cooperative team of soccerplaying multiple mobile robots. The hierarchical controller is composed of high-level and low-level controllers. Using the coordinates information of objects from the vision are simple models of multiple mobile tobots on the playground. Subsequently, the high level controller selects and action model corresponding to the perceived state transition model and generates subgoal and goal-velocity, from which the low level controller generates trajectory of each wheel velocity of the robot. This two layered simplicity. The feasubility of the control strategy has been demonstrated in an implementation for real soccer games at a MiroSot league.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.254-257
• /
• 2011

This study was performed to development a dental three-dimensional laser scanning system and measure the accuracy of new adjustable lower dental impression trays. Multiple impressions of a resin master model were made with custom, stock and new adjustable trays and vinyl polysiloxane impression material. The lower master model and resulting cast were compared using an dental scanning system. Each 3D image was superimposed onto the lower master model image and analyzed with custom software. Multiple measurements of the lower master model and casts were analyzed to determine the accuracy of tray types.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.5-11
• /
• 2010

An adaptive formation control approach is proposed for nonhonolomic multiple mobile robots considering unknown slipping and skidding. It is assumed that unknown slipping and skidding effects are bounded by unknown constants. Under this assumption, the adaptive technique is employed to estimate the bounds of unknown slipping and skidding effects of each mobile robot. To deal with the skidding effect included in kinematics, the dynamic surface design approach is applied to design a local controller for each mobile robot. Using Lyapunov stability theorem, the adaptation laws for tuning bounds of slipping and skidding are induced and it is proved that all signals of the closed-loop system are bounded and the tracking errors and the synchronization errors of the path parameters converge to an adjustable neighborhood of the origin. Finally, simulation results are provided to verify the effectiveness of the proposed approach.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.896-900
• /
• 2013

In this paper, we develop a dust detection sensor system capable of identifying types of dust for an improvement of a robot vacuum cleaner. The dust detection sensor system is composed of a set of infra-red sensors: a single transmitter and multiple receivers. Given the fixed amount of light transmitted from the transmitter, the amount of light coming in multiple receiver sensors varies, depending on the type and density of dust that is passing between the transmitter and the receivers. Therefore, the type of dust can be identified by means of observing the change of the amount of light from the receiver sensors. For experiments, we use two types of dust, rice and sesame, and validate the effectiveness of the proposed method.