• Computers and Concrete
• /
• 제33권4호
• /
• pp.399-407
• /
• 2024

This study nondestructively examined the evolution of crack density in ultra-high performance concrete (UHPC) upon cyclic loading. Uniaxial compression was repeatedly applied to the cylindrical specimens at levels corresponding to 32% and 53% of the maximum load-bearing capacity, each at a steady strain rate. At each stage, both P-wave and S-wave velocities were measured in the absence of the applied load. In particular, the continuous monitoring of P-wave velocity from the first loading prior to the second loading allowed real-time observation of the strengthening effect during loading and the recovery effect afterwards. Increasing the number of cycles resulted in the reduction of both elastic wave velocities and Young's modulus, along with a slight rise in Poisson's ratio in both tested cases. The computed crack density showed a monotonically increasing trend with repeated loading, more significant at 53% than at 32% loading. Furthermore, the spatial distribution of the crack density along the height was achieved, validating the directional dependency of microcracking development. This study demonstrated the capability of the crack density to capture the evolution of microcracks in UHPC under cyclic loading condition, as an early-stage damage indicator.

• 복합신소재구조학회지
• /
• 제6권1호
• /
• pp.24-32
• /
• 2015

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.155-156
• /
• 2008

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.169-172
• /
• 2009

Multiple scale modeling has been applied to predict defect shape change during the wire rod rolling process. The size difference between bloom and defect prevent using usual FEM approaches due to the enormous number of elements required to depict the defect. The newly developed multiple scale model can visualize defect shape changes during the multi stands rolling process. The defect positioned at the top and side of bloom are smoothed out but the one at the middle evolved as folding or remained as crack. This approach can be used for defect control with roll shape design and initial bloom shape.

• Structural Engineering and Mechanics
• /
• 제26권5호
• /
• pp.557-568
• /
• 2007

The elastic T-stress is increasingly being recognized as an important second parameter to the stress intensity factor for fracture and fatigue assessments. In this paper, the mutual or M-contour integral approach is employed in conjunction with the Boundary Element Method (BEM) to determine the numerical T-stress solutions for cracks in plates with multiple holes. The problems investigated include plates of infinite width with multiple holes at which single or double, symmetric cracks have grown from. Comparisons of these results are also made with the corresponding solutions of finite plates with a single hole. For completeness, stress intensity factor solutions for the cracked geometries analyzed are presented as well. These results will be useful for failure assessments using the two-parameter linear elastic fracture mechanics approach.

• 콘크리트학회논문집
• /
• 제17권2호
• /
• pp.263-271
• /
• 2005

고인성 시멘트 복합재료(HPFRCC)는 시멘트페이스트 또는 모르타르에 고성능 단섬유를 보강하여 휨모멘트 및 인장력 작용하에서 변위(변형)경화특성 및 다수의 미세균열이 멀티플크랙 특성을 발휘함으로서 높은 인성 및 균열제어성능을 가진 재료로 최근 이들 성능을 활용하여 고성능 보수 보강재, 충격완충재, 강재의 피복재, 지진시 에너지 흡수 디바이스 등 다양한 용도로의 활용이 시도되고 있다. 그러나 이들 HPFRCC의 역학적 성능은 사용되는 섬유의 종류 및 형상에 따라 다르며 마이크로 크랙 및 매크로 크랙에 효과적인 섬유의 치수는 다른 것으로 알려져 있다. 따라서 본 연구에서는 마이크로 및 매크로 섬유의 종류, 각 섬유의 혼합조건을 변화시켜 HPFRCC의 압축 및 휨성상을 실험실증적으로 비교 검토함으로서 HPFRCC의 재료설계에 기초자료를 제시하고자 하였다. 그 결과, HPFRCC의 압축 및 휨성상은 사용된 마이크로 섬유의 종류에 따라 큰 차이를 보이고 있으며 PP섬유에 비하여 PVA섬유를 사용한 경우가 우수한 성능을 발현하였다. 또한, 각각의 마이크로 섬유에 매크로 섬유로서 PVA660을 혼합 사용한 경우 PVA200을 제외하고는 초기근열시 휨응력, 최대 휨응력, 변형능력 및 휨터 프니스 등의 휨성능이 향상되었다. 특히 PVA100과 PVA660을 혼합 사용한 경우 가장 우수한 성능을 발현하였으며, 휨시험시 전형적인 변위경화특성 및 멀티플크랙 특성을 나타내었다. 반면, 매크로 섬유로서 SF500을 혼합 사용한 경우의 휨응력-중앙변위 곡선은 기존의 FRCC와 유사한 경향을 보이고 있으며, 휨터프니스는 마이크로 섬유만 단독 사용한 경우에 비해 전반적으로 저하하는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제21권9호
• /
• pp.1452-1461
• /
• 1997

The hot press apparatus to obtain the solidified rocks with 60mm of diameter against rock waste was developed, and the optimum conditions for solidification were founded out, of which were 300.deg. C of temperature and 1hr of holding time. The solidified rocks reinforced with the fibers (carbon, steel) were made by means of a hydrothermal hot press method. Fracture toughness of those was obtained using the round compact tension(RCT) specimens. Load and displacement behaviours of the solidified rocks reinforced with the fibers were dependent upon the fiber volume fraction and kind of the fibers. Strength and fracture energy of the solidified rocks with steel were much larger than those of the solidified ones with carbon because of the Bridge's effect, multiple cracking and crack branching phenomena.

• Advances in nano research
• /
• 제6권1호
• /
• pp.57-80
• /
• 2018

In this study, the thermal loading effect on free vibration characteristics of carbon nanotubes (CNTs) with multiple cracks is studied. Various boundary conditions for nanotube are taken in to account. In order to take the small scale effect, the nonlocal elasticity of Eringen is employed in the framework of Euler-Bernoulli beam theory. This theory states that the stress at a reference point is a function of strains at all points in the continuum. A cracked nanotube is assumed to be consisted of two segments that are connected by a rotational spring which is located in the position of the cracked section. Hamilton's principle is used to achieve the governing equations. Influences of the nonlocal parameter, crack severity, temperature change and the number of cracks on the system frequencies are investigated. Also, it is found that at room or lower temperature the natural frequency for CNT decreases as the value of temperature change increases, while at temperature higher than room temperature the natural frequency of CNT increases as the value of temperature change increases. Various boundary conditions have been applied to the nanotube.

• Smart Structures and Systems
• /
• 제16권6호
• /
• pp.1107-1132
• /
• 2015

A damage detection algorithm based on neuro fuzzy hybrid system is presented in this study for location and severity predictions of cracks in beam-like structures. A combination of eigenfrequencies and rotation deviation curves are utilized as input to the soft computing technique. Both single and multiple damage cases are considered. Theoretical expressions leading to modal properties of damaged beam elements are provided. The beam formulation is based on Euler-Bernoulli theory. The cracked section of beam is simulated employing discrete spring model whose compliance is computed from stress intensity factors of fracture mechanics. A hybrid neuro fuzzy technique is utilized to solve the inverse problem of crack identification. Two different neuro fuzzy systems including grid partitioning (GP) and subtractive clustering (SC) are investigated for the highlighted problem. Several error metrics are utilized for evaluating the accuracy of the hybrid algorithms. The study is the first in terms of 1) using the two models of neuro fuzzy systems in crack detection and 2) considering multiple damages in beam elements employing the fused neuro fuzzy procedures. At the end of the study, the developed hybrid models are tested by utilizing the noise-contaminated data. Considering the robustness of the models, they can be employed as damage identification algorithms in health monitoring of beam-like structures.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.125-138
• /
• 2018

This paper proposes a transfer matrix method for the bending vibration of two types of tapered beams subjected to axial force, and it is applied to analyze tapered beams with an edge or multiple edge open cracks. One beam type is assumed to be reduced linearly in the cross-section height along the beam length. The other type is a tapered beam in which the cross-section height and width with the same taper ratio is linearly reduced simultaneously. Each crack is modeled as two sub-elements connected by a rotational spring, and the method can evaluate the effect of cracking on the desired number of eigenfrequencies using a minimum number of subdivisions. Among the power series available for the solutions, the roots of the differential equation are computed using the Frobenius method. The computed results confirm the accuracy of the method and are compared with previously reported results. The effectiveness of the proposed methods is demonstrated by examining specific examples, and the effects of cracking and axial loading are carefully examined by a comparison of the single and double tapered beam results.