• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2011년도 춘계학술발표대회 논문집
• /
• pp.247-250
• /
• 2011

The purpose of this study suggests the emotion of residents as indexes in Korean housing environment for providing a fundamental guideline for precise dwelling social science and indicating the view for understanding of residents in korean housing culture in korea. So this paper explores the role of residents emotion indexes in housing environment and community. For this study, survey and depth-interview methods were used for data collection. The subjects were 514 housewives living in apartments. The statistical methods for data analysis were frequency, mean, multiple linear regression and logistic regression analysis using the SPSS 18.0 program The major findings are as follows: 1)Pride of neighborhood, pride of apartment complex and sense of superiority were important factors for residental satisfaction. 2)Conspicuous image of neighbors and active contact with neighbors were import factors for their neighborship in the apartment complex. The results develop the housing environment evaluation indexes in community through the contextual understanding of space emotion society.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.138-144
• /
• 2006

Non-contact transportation of a large-sized glass plate using air cushion for the sputtering system of liquid crystal display panel was considered. The gas is injected through multiple small holes to maintain the force for levitating glass plate. Complex flow field and resulting pressure distribution on the glass surface was numerically studied to design the air injection pad. The exhaust hole size was varied to obtain evenly distributed pressure distribution at fixed diameter of the injection hole. Considering the force for levitating glass plate, the diameter of the exhaust hole of 30 to 40 times of the gas injection hole was recommended.

• 지역사회간호학회지
• /
• 제30권4호
• /
• pp.518-527
• /
• 2019

Purpose: The purpose of this study was to identify the factors influencing health-related quality of life among spouses of older adults with dementia based on an ecological model. Methods: This study used data from the 2015 Korean Community Health Survey with the subjects of 541 spouses of older adults with dementia. The data were analyzed using descriptive statistics, independent t-test, ANOVA, and hierarchical multiple regression. Results: In this study, 26.5% of quality of life was explained by employment status, physical activity, perception of stress, perception of depressive symptom, self-rated health status, self-rated oral health status, and contact with neighbors. Conclusion: To develop more effective nursing intervention for improvement of quality of life, it needs to consider not only the individual system related factors but also community system related factors including contact with neighbors.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.164-169
• /
• 2009

An RFID system consists of radio frequency tags attached to objects that need to be identified and one or more electromagnetic readers. Unlike the traditional bar code system, the great benefit of RFID technology is that it allows information to be read without requiring contact between the tag and the reader. For this contact-less feature, RFID technology in the near future will become an attractive alternative to bar code in many application fields. In almost all the 13.56MHz RFID systems, FSA (Framed Slot ALOHA) algorithm is used for identifying multiple tags in the reader's identification range. In FSA algorithm, the tag identification time and system efficiency depend mainly on the number of tags and frame size. In this paper, we propose a tag number estimation scheme and a dynamic frame size allocation scheme based on the estimated number of tags.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.13-13
• /
• 2010

The solar energy conversion will take 10 % global energy need by 2033. A thin film type solar cell has been considered as one of the promising candidates for a large area applicable solar cell fabrication at a low cost. The metal-assisted growth of microcrystalline Si (mc-Si) films has been reported for a quality Si film synthesis at a low temperature. It discusses the spontaneous growth of a Si film above a metal-layer for a thin film solar cell. Quite recently, a substantial demand of nanomaterials has been addressed for cost-effective solar cells. The nanostructure provides a large photoactive surface at a fixed volume, which is an advantage in the effective use of solar power. But the promising of nanostructure active solar cell has not been much fulfilled due mainly to the difficulty in architecture of nanostructures. We present here the Si nanowire (SiNW)-embedded Schottky solar cell. Multiple SiNWs were connected to two different metals to form a Schottky or an ohmic contact according to the metal work function values. It discusses the scheme of rectifying contact between metals and SiNWs and the SiNW-embedded Schottky solar cell performances.

• 전기학회논문지P
• /
• 제56권1호
• /
• pp.37-44
• /
• 2007

This paper describes characteristics for copper oxide growth of polyvinyl chloride(PVC) insulated wires by series arc. In this experiment, 600V IV wires were used, and characteristics of oxide growth and ignition process were analyzed in case load was 300W, 460W and 600W, respectively. In the result of experiment, covering materials were molten, carbonized and ignited, whereas, oxidized materials were grown in conducting material. During copper oxide was growing, contact voltages and power dissipations increased. When there is copper oxide growth, the waveform of current showed sinusoidal waveform, and the waveform of voltage showed modified waveform. Oxidized materials were heated at about $905^{\circ}C$, surface structure showed irregular shapes, and cross-section showed multiple cracks. And, the results of this experiment were applied to the fire cause analysis of fire evidence collected at the fire scene.

• Advanced Composite Materials
• /
• 제16권1호
• /
• pp.45-61
• /
• 2007

This paper describes a damage accumulation mechanism in cross-ply CFRP laminates $[0_2/90_2]_{2S}$ subjected to out-of-plane loading. Drop-weight impact and static indentation tests were carried out, and induced damage was observed by ultrasonic C-scan and an optical microscope. Both tests gave essentially the same results for damage modes, sizes, and load-deformation history. First, a crack occurred in the bottom $0^{\circ}$ layer accompanying some delamination along the crack caused by bending stress. Then, transverse cracks occurred in the middle $90^{\circ}$ layer with decreasing contact force between the specimen and the indenter. Measured local strains near the impact point showed that the stress state changed from a bending dominant state to an in-plane tensile dominant state. A cohesive interface element was used to simulate the propagation of multiple delaminations and transverse cracks under static indentation. Two types of analytical models are considered, one with multiple delaminations and the other with both multiple delaminations and transverse cracks. The damage obtained for the model with only multiple delaminations was quite different from that obtained from the experiment. However, the results obtained from the model with both delaminations and transverse cracks well explain the characteristics of the damage obtained in the experiment. The existence of the transverse cracks is essential to form the characteristic impact damage.

• 대한치과보철학회지
• /
• 제42권4호
• /
• pp.425-442
• /
• 2004

Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.

• 디지털융복합연구
• /
• 제16권1호
• /
• pp.187-195
• /
• 2018

본 연구는 간호대학생의 사회적거리감과 다문화수용성의 관계에서 다문화접촉경험의 조절효과를 검정하기 위해 시도되었다. 연구 대상자는 4개 대학 간호학과 학생 174명이었다. 자료는 SPSS/WIN 23.0을 이용하여 기술통계, t-test, ANOVA, $Scheff{\acute{e}}$ test, 피어슨상관관계, 위계적 회귀분석을 하였다. 연구결과 (a) 다문화수용성은 사회적거리감과 부적 상관관계(r=-.61, p<.001)를, 다문화접촉경험과 양적 상관관계(r=.24, p=.002)가 있었다. (b) 다문화접촉경험과 사회적거리감의 상호작용효과는 다문화수용성에 유의한 영향을 미쳤다(${\beta}=-.18$, p=.003). (c) 다문화접촉경험은 사회적거리감과 다문화수용성 관계를 조절하였다(${\Delta}R^2=0.30$, p=.003). 본 연구를 통하여 다문화접촉경험이 커질수록 사회적거리감이 다문화수용성에 미치는 음의 영향력이 커짐을 알 수 있었다. 따라서 다문화수용성 향상을 위하여 사회적거리감을 줄이고 긍정적인 다문화접촉경험의 접근이 필요하다.

• 미생물학회지
• /
• 제46권2호
• /
• pp.152-156
• /
• 2010

연성 콘택트렌즈 종류의 하나인 일회용 렌즈는 사용상 편리함을 주는 반면 다양한 안과적 감염성 질환을 초래한다. 안 질환을 유발하는 미생물로는 Acanthamoeba, Bacteria, Fungi 등이 있다. 렌즈 착용시 손을 이용함으로 다양한 미생물 오염은 근절이 불가피한 실정이다. 다양한 미생물의 오염으로 인해 감염성 각막염을 유발하나 정확한 미생물 동정은 미비한 상태이다. 이런 이유로 렌즈를 세척하기 위해 흔히 사용하는 식염수와 ReNu Solution (Bausch and Lomb Company, USA)의 2그룹으로 나누고 식염수와 ReNu Solution을 사용하여 1, 3, 5 10 그리고 15일에 따라 미생물 오염의 정도를 살펴보고 분리되는 미생물을 동정하고자 하였다. 대구시 D대학 안경광학과 재학생들의 안과적 건강상태를 조사한 후 그룹별 10명씩 지정하였다. 일일 착용렌즈를 1일, 3일, 5일 10일, 그리고 15일에 따라 사용 후 배지에서 세균을 배양하였다. 배양된 집락을 선택하여 그람 염색한 결과, Gram-positive cocci 33%, Gram-negative cocci 2%, Gram-positive bacilli 34%, 그리고 Gram-negative bacilli 31%로 나타냈고 이러한 세균을 동정하기 위해 API kit와 VITEK system을 이용하였다. 그 결과 콘택트렌즈의 착용에 의해 유발되는 각막염의 원인세균으로 알려진 S. aureus, P. aeruginosa 등이 분리되었다. 본 연구에서는 연성렌즈의 하나인 일일 착용렌즈의 착용시 세척액에 따른 일반세균의 분포와 일회용 렌즈의 연속 착용에 따른 병원성 세균을 조사함으로 콘택트렌즈의 사용시 위생의 필요성을 시사한다.