• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1834-1843
• /
• 2016

DVRs are the most common recording and displaying devices used for surveillance. Video compression plays a key role in DVRs for saving storage; the video compression standard, H.264/AVC, has recently become the dominant choice for DVRs. DVRs require various display modes, such as fast-forward, backward play, and pause; these are called trick modes. The implementation of precise trick mode play requires a very high decoding capability or a very intelligent scheme in order to handle the high computation complexity. The complexity is increased in many surveillance applications where more than one camera is used to monitor multiple spots or to monitor the same area using various angles. An implementation of a trick mode play and a frame buffer management scheme for the hardware-based H.264/AVC codec for multi-channel is presented in this paper. The experimental results show that exact trick mode play is possible using a standard H.264/AVC video codec with keyframe encoding feature at the expense of bitstream size increase.

• The Journal of Korean Physical Therapy
• /
• v.31 no.6
• /
• pp.333-338
• /
• 2019

Purpose: Although previous studies on the screw-home movement (SHM) for autopsy specimen and walking of living persons conducted, the possibility of acquiring SHM based on inertial measurement units received little attention. This study aimed to investigate the possibility of measuring SHM for the non-weighted bearing using a micro-electro-mechanical system-based wearable motion capture system (MEMSS). Methods: MEMSS and camera-based motion analysis systems were used to obtain kinematic data of the knee joint. The knee joint moved from the flexion position to a fully extended position and then back to the start point. The coefficient of multiple correlation and the difference in the range of motion were used to assess the waveform similarity in the movement measured by two measurement systems. Results: The waveform similarity in the sagittal plane was excellent and the in the transverse plane was good. Significant differences were found in the sagittal plane between the two systems (p<0.05). However, there was no significant difference in the transverse plane between the two systems (p>0.05). Conclusion: The SHM during the passive motion without muscle contraction in the non-weighted bearing appeared in the entire range. We thought that the MEMSS could be easily applied to the acquisition of biomechanical data on the knee related to physical therapy.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.80-85
• /
• 2017

Purpose: In this study, we attempted to analyze, by using a high-speed camera, the cutting shape as a function of cutting speed and feed rate. We compared the differences in cutting shape between domestic and foreign combines. Methods: Experiments were performed using plastic straws, and the results of two combine cutting blades, one from the Daedong Industry and one from Kuboda, were compared. The quality and performances of cutting were measured at three cutting positions: center and 68 cm to the left and right of the center. The feed rates were 0.6 m/s, 1.1 m/s, 1.6 m/s, and the cutting speeds were 600 RPM, 990 RPM, 1,380 RPM. For each speed, the cutting shape was measured three times, and the entire procedure was also repeated three times. Results: In the experiments, the domestic cutting blade achieved better results than the Japanese cutting blade. These results were obtained by studying the combination of feed rate and cutting speed, with the domestic combine attaining approximately 80% performance of the Japanese combine. We believe that additional data analysis is required, obtained from field experiments. Conclusions: The domestic cutting knives achieved better results than the Japanese cutting knives. These results are estimated from experiments conducted with different feed rates and cutting speeds; an in-depth analysis will require experiments in the real field with actual combines and a combination of multiple variables. Repeating the investigation on the length differences, broken and cut angle with various combinations of feed rate and cutting speed, will surely help to find the optimal cutting speed.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.155-164
• /
• 2011

APP based on the smart phone is being utilized to various scopes such as medical services in hospitals, financing services at banks and credit card companies, and ubiquitous technologies in companies and homes etc. In this service environment, exposures of smart phones cause loss of assets including leaks of official/private information by outsiders. Though secret keys, pattern recognition technologies, and single image authentication techniques are being applied as protective methods, but they have problems in that accesses are possible by utilizing static key values or images like pictures. Therefore, this study proposes a face authentication technology for protecting smart phones from these dangerous factors and problems. The proposed technology authenticates users by extracting key frames of user's facial images by real time, and also controls accesses to the smart phone. Authentication information is composed of multiple key frames, and the user' access is controlled by distinction algorism of similarity utilizing DC values of image's pixel and luminance.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.572-575
• /
• 2006

In this work, a variety of polymer based jelly phantoms suitable for the hyperthermia operations to human organs was synthesized in order to confirm the possibility of auxiliary cancer therapy. Specifically, using an appropriate material composition including polyethylene, Jelly phantoms for brain was prepared and characterized their electrical properties suitable for the monitoring the effect of electromagnetic wave from code division multiple access (CDMA) and personal communication service (PCS) on the human body. In the future, after injection of ferromagnetic nanoparticle into the jelly phantoms, new approach to propose the cancer therapy can be anticipated by monitoring the degree of temperature rise in human body using the photograph of Infrared camera.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.11-20
• /
• 2010

In situation that carbon dioxide emissions are being increased as urbanization, urban green space is being promoted as an alternative to find solution for these problems. In urban areas, trees have the ability to reduce carbon dioxide as well as to be aesthetic effect. In this study, we proposed the methodology which uses only LIDAR data in order to extract these trees information effectively. To improve the operational efficiency according to the extraction of trees, the proposed methodology was carried out using multiple data processing such as point, polygon and raster. Because the existing NDSM(Normalized Digital Surface Model) contains both the building and tree information, it has the problems of high complexity of data processing for extracting trees. Therefore, in order to improve these problems, this study used modified NDSM which was removed estimate regions of building. To evaluate the performance of the proposed methodology, three different zones which coexist buildings and trees within urban areas were selected and the accuracy of extracted trees was compared with the image taken by digital camera.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.87-94
• /
• 2005

3D image mosaicking is useful for 3D visualization of the roadside scene of urban area by projecting 2D images to the 3D planes. When a sequence of images are filmed from a side-looking video camera passing long distance areas, the ghost effect in which same objects appear repeatively occurs. To suppress such ghost effect, the long distance range areas are detected by using the distance between the image frame and the 3D coordinate of tracked optical flows. The ghost effects are suppressed by projecting the part of image frames onto 3D multiple planes utilizing vectors passing the focal point of frames and a virtual focal point. The virtual focal point is calculated by utilizing the first and last frames of the long distance range areas. We demonstrate algorithm that creates efficient 3D Panoramic mosaics without the ghost effect at the long distance area.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.60-68
• /
• 2017

Through this thesis, I wanted to understand the form of free indirect discourse of modern films. To this end, I first explored the notion of the polyphonie as a mixture of the speaker and the character' voice in order to establish a concept related to free indirect discourse. However, I could not overlook the differences in the form of novels and movies to apply the following theory to films. Based on the concept of narrative distance, I sought to explore the possibility of free indirect discourse from the dual position of the camera. Next, I introduced the concept of free indirect discourse in the film by introducing the concept of Time in G. Deleuze' CinemaII. In other words, the time from Deleuze is the past and the present cycle, and he sees the Time circulating like the Non-Euclidean space. I wanted to understand the form of free indirect discourse in films by analyzing the concept of Time as an analysis of the movie .

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1556-1567
• /
• 2009

The death rate of pedestrian in car accidents in Korea is 2.5 times higher than the average of OECD countries'. If a system that can detect pedestrians and send alarm to drivers is built and reduces the rate, it is worth developing such a pedestrian detection system (PDS). Since the accident rate in which pedestrians are involved is higher at nighttime than in daytime, the adoption of nighttime PDS is being standardized by big auto companies. However, they are usually using night visions or multiple sensors, which are usually expensive. In this paper we suggest a method for nighttime PDS using single wide dynamic range (WDR) monochrome camera in visible spectrum band. In our experiments, pedestrians were accurately detected if only most edges of pedestrians could be obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.235-244
• /
• 2016

Automotive symbols are more widely needed for new, convenient driving devices in automobiles. Good automotive symbols should be detectable, identifiable at first glance, easily learned, recognizable, and produce quick responses after practice. In this paper, a methodology for developing and evaluating automotive symbols is suggested. It includes multiple tests, such as comprehension, perceptual quality, appropriateness, and integrated evaluation. 28 symbols were tested and evaluated by the suggested methodology for convenient driving systems, such as a lane departure warning system (LDWS), cruise control (CCS), and a collision warning system (CWS). Most of the KS R ISO 2575 symbols had higher scores of comprehension, perceptual quality, and appropriateness, but the sunroof and camera symbols had lower scores. Standard symbols with several new functions should be developed. This methodology could be useful for developing and evaluating automotive symbols.