• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.271-276
• /
• 2009

An local area weather condition monitoring system to minimize many disasters from the sudden change of weather condition in local and mountain area is proposed. Firstly, the comparison of present state of the related monitoring systems and the possibility of realization with some merits are investigated. Moreover, this paper present direction of local area weather condition monitoring system based on integration of wireless sensor network and CDMA network following some case study. Through the efficient integration of both networks, the measured weather condition data from sensors can be transmitted to the server or mobile to monitor with high reliability. The proposed monitoring system will guide new type of project in wireless sensor network and support alarm service of the sudden change of weather condition to mobile user from central official regulations.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.426-439
• /
• 2018

Purpose: To continuously monitor soil and climatic properties, a data acquisition system (DAQ) was developed and tested in plum farms (Gyewol-ri and Haechang-ri, Suncheon, Korea). Methods: The DAQ consisted of a Raspberry-Pi processor, a modem, and an ADC board with multiple sensors (soil moisture content (SEN0193), soil temperature (DS18B20), climatic temperature and humidity (DHT22), and rainfall gauge (TR-525M)). In the laboratory, various tests were conducted to calibrate SEN0193 at different soil moistures, soil temperatures, depths, and bulk densities. For performance comparison of the SEN0193 sensor, two commercial moisture sensors (SMS-BTA and WT-1000B) were tested in the field. The collected field data in Raspberry-Pi were transmitted and stored on a web server database through a commercial communications wireless network. Results: In laboratory tests, it was found that the SEN0193 sensor voltage reading increased significantly with an increase in soil bulk density. A linear calibration equation was developed between voltage and soil moisture content depending on the farm soil bulk density. In field tests, the SEN0193 sensor showed linearity (R = 0.76 and 0.73) between output voltage and moisture content; however, the other two sensors showed no linearity, indicating that site-specific calibration is important for accurate sensing. In the long-term monitoring results, it was observed that the measured climate temperature was almost the same as website information. Soil temperature information was higher than the values measured by DS18B20 during spring and summer. However, the local rainfall measured using TR 525M was significantly different from the values on the website. Conclusion: Based on the test results obtained using the developed monitoring system, it is thought that the measurement of various parameters using one device would be helpful in monitoring plum growth. Field data from the local farm monitoring system can be coupled with website information from the weather station and used more efficiently.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.397-399
• /
• 2005

무선 센서노드를 활용한 다양한 네트워크 설계 기술은 실생활의 각종 정보 수집에서부터 환경 모니터링까지 폭넓은 활용범위를 바탕으로 저전력 노드 설계 기술, 노드간 라우팅 프로토콜, 초소형 운영체제 및 미들웨어기술 등 관련 연구가 활발히 수행되고 있으며, 실내 센서네트워크에 분포된 노드의 절대위치를 측정하는 위치인식 시스템은 노드의 이동성, 다수성 그리고 환경의 제약성으로 인해 이를 보완할 시스템이 요구되고 있다. 이에 본 논문에서는 고정 센서노드의 배치밀도에 따라 위치정보를 선별적으로 처리하는 위치데이터 처리기와 다중 위치데이터의 발생을 원천적으로 차단하는 노드간 라우팅 기법을 통해, 센서노드의 이동성과 다중성을 효과적으로 보완하는 실내 이동객체 위치인식 시스템을 설계하고 서비스 구현을 위한 센서네트워크 플랫폼을 제안한다.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.91-97
• /
• 2017

IoT (Internet of Things) systems are based on heterogeneous hardware systems of different types of devices interconnected each other, ranging from miniaturized and low-power wireless sensor node to cloud servers. These IoT systems composed of heterogeneous hardware utilize data sets collected from a particular set of sensors or control designated actuators when needed using open APIs created through abstraction of devices' resources associated to service applications. However, previously existing IoT services have been usually developed based on vertical platforms, whose sharing and exchange of data is limited within each industry domain, for example, healthcare. Such problem is called 'data silo', and considered one of crucial issues to be solved for the success of establishing IoT ecosystems. Also, IoT services may need to dynamically organize their services according to the change of status of connected devices due to their mobility and dynamic network connectivity. We propose a way of dynamically composing IoT services under the concept of WoT (Web of Things) where heterogeneous devices across different industries are fully integrated into the Web. Our approach allows developers to create IoT services or mash them up in an efficient way using Web objects registered into multiple standardized horizontal IoT platforms where their resources are discoverable and accessible. A Web-based service composition tool is developed to evaluate the practical feasibility of our approach under real-world service development.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.295-298
• /
• 2009

다중 표적을 감시하는 무선 센서 네트워크에서 다중 표적이 서로 교차하게 될 때 각각의 표적을 분리하는 문제는 표적의 추적, 탐지, 식별 등의 분야에서 매우 중요하다. 기존의 무선 센서 네트워크에서는 에너지 기반의 기법을 사용하기 때문에 다중 표적의 위치를 추정할 수 없거나, 기지국에서의 원 신호 분석 방법을 통해 표적의 종류를 식별하여 각각의 표적을 분리한다. 후자의 방법은 무선 센서 노드의 통신량과 연산량을 증가시켜 센서 노드의 생존 시간이 짧아지는 단점이 있고, 표적 분리까지 걸리는 시간으로 인해 실시간 처리가 어렵다. 본 논문에서는 무선 센서 노드에서 웨이블릿 변환을 이용한 특징을 추출하고 이를 이용해 다중 표적이 센서 영역 내에서 교차하게 될 때 표적을 분리하는 방법을 제안한다. 제안된 방법은 웨이블릿 상수의 주파수 정보를 이용하여 적은 연산으로 표적을 분리한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.45-46
• /
• 2018

본 논문에서는 시간에 엄격한(Time critical) 산업용 IoT(Industrial IoT) 환경의 무선 센서 네트워크 시스템 상의 효율적인 패킷 전달과 정확도(Accuracy) 향상을 위해 강화학습과 EDF 알고리즘을 혼합한 스케쥴링 기법을 제안한다. 이 방식은 다중 대기열(Multiple queue) 환경에서 각 대기열의 요구 정확도(Accuracy Requirement)를 기준으로 최대한 패킷 처리를 미룸으로써 효율적인 CPU자원 분배와 패킷 손실율(Packet Loss)을 조절한다. 제안하는 기법은 무선 센서 네트워크 상의 가변적이고 예측 불가능한 환경에 대한 사전지식이 없이도 요구하는 서비스의 질(Quality of service)를 만족할 수 있도록 한다. 또한 정확도를 요구조건으로 제시하여 마감시간이 중요시되는 작업에서도 효율을 최대화한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.35-42
• /
• 2011

WPAN(Wireless Personal Area Network) have many advantages such as using low power and cheap price, small size. So it is recently increasing application range such as personal portable device, home network and sensor network so and on. IEEE 802.15.3 basically has the point to point or peer to peer UM(Usage Model). But using devises that need data transmission is increasing in the house and office. Therefor UM of point to multipoint is proposed. In this paper, I proposed Multicast ACK mechanism on the point to multipoint UM. So it is able to transfer data to multiple devices as this Multicast transfer method at a time. Thus, throughput performance is improved. But the problem that increases data transfer delay is appeared because of adding Multicast ACK traffic. We compared the performance between standard and proposed mechanism through a numerical analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.1204-1227
• /
• 2020

The tradeoff between energy conservation and traffic balancing is a dilemma problem in Wireless Sensor Networks (WSNs). By analyzing the intrinsic relationship between cluster properties and long distance transmission energy consumption, we characterize three node sets of the cluster as a theoretical foundation to enhance high performance of WSNs, and propose optimal solutions by introducing rendezvous and Mobile Elements (MEs) to optimize energy consumption for prolonging the lifetime of WSNs. First, we exploit an approximate method based on the transmission distance from the different node to an ME to select suboptimal Rendezvous Point (RP) on the trajectory for ME to collect data. Then, we define data transmission routing sequence and model rendezvous planning for the cluster. In order to achieve optimization of energy consumption, we specifically apply the economic theory called Diminishing Marginal Utility Rule (DMUR) and create the utility function with regard to energy to develop an adaptive energy consumption optimization framework to achieve energy efficiency for data collection. At last, Rendezvous Transmission Algorithm (RTA) is proposed to better tradeoff between energy conservation and traffic balancing. Furthermore, via collaborations among multiple MEs, we design Two-Orbit Back-Propagation Algorithm (TOBPA) which concurrently handles load imbalance phenomenon to improve the efficiency of data collection. The simulation results show that our solutions can improve energy efficiency of the whole network and reduce the energy consumption of sensor nodes, which in turn prolong the lifetime of WSNs.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1470-1475
• /
• 2009

Until now for the safety of structures and equipment monitoring technology to measure the amount of the physical, if that is the one, one-point or single-source target is one the most. Therefore, becoming more numerous and complex to measure the amount of physical measurement technology that is comprehensive and complex, multi-source concepts to the monitoring of a multi-sensing technology is required. Have the same characteristics of multi-source multi-use space such as a multi-structure of facilities/equipment is. The people's safety in a multi-use facility will be directly related to life and even a little carelessness can lead to large-scale disaster occurs because of several factors, risks and to manage detect in advance the development of an intelligent monitoring technology is essential. Therefore, this study shows that multiple structures/facilities to improve the quality of human life in research to maintain a safe and comfortable living space for multi-source intelligence to the development of monitoring technology to achieve that goal, and the ubiquitous sensor network system on the basis of the wireless transmission module, and multiple research facilities/equipment for the ultra-small sensors for health monitoring study was performed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2577-2596
• /
• 2013

In this paper, we present an Energy-Aware Self-Stabilizing Distributed Clustering protocol based on message-passing model for Ad Hoc networks. The latter does not require any initialization. Starting from an arbitrary configuration, the network converges to a stable state in a finite time. Our contribution is twofold. We firstly give the formal proof that the stabilization is reached after at most n+2 transitions and requires at most $n{\times}log(2n+{\kappa}+3)$ memory space, where n is the number of network nodes and ${\kappa}$ represents the maximum hops number in the clusters. Furthermore, using the OMNeT++ simulator, we perform an evaluation of our approach. Secondly, we propose an adaptation of our solution in the context of Wireless Sensor Networks (WSNs) with energy constraint. We notably show that our protocol can be easily used for constructing clusters according to multiple criteria in the election of cluster-heads, such as nodes' identity, residual energy or degree. We give a comparison under the different election metrics by evaluating their communication cost and energy consumption. Simulation results show that in terms of number of exchanged messages and energy consumption, it is better to use the Highest-ID metric for electing CHs.