• ETRI Journal
• /
• v.31 no.6
• /
• pp.709-716
• /
• 2009

In this paper, we propose a novel reconfigurable processor using dynamically partitioned single-instruction multiple-data (DP-SIMD) which is able to process multimedia data. The SIMD processor and parallel SIMD (P-SIMD) processor, which is composed of a number of SIMD processors, are usually used these days. But these processors are inefficient because all processing units (PUs) should process the same operations all the time. Moreover, the PUs can process different operations only when every SIMD group operation is predefined. We propose a processor control method which can partition parallel processors into multiple SIMD-based processors dynamically to enhance efficiency. For performance evaluation of the proposed method, we carried out the inverse transform, inverse quantization, and motion compensation operations of H.264 using processors based on SIMD, P-SIMD, and DP-SIMD. Experimental results show that the DP-SIMD control method is more efficient than SIMD and P-SIMD control methods by about 15% and 14%, respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.450-457
• /
• 2004

In this research, the automatic synthesis of knowledge models is proposed. which are the basis of the methods using qualitative models adapted widely in fault diagnosis and hazard evaluation of chemical processes. To provide an easy and fast way to construct accurate causal model of the target process, the Role-Behavior modeling method is developed to represent the knowledge of modularized process units. In this modeling method, Fault-Behavior model and Structure-Role model present the relationship of the internal behaviors and faults in the process units and the relationship between process units respectively. Through the multiple modeling techniques, the knowledge is separated into what is independent of process and dependent on process to provide the extensibility and portability in model building, and possibility in the automatic synthesis. By taking advantage of the Role-Behavior Model, an algorithm is proposed to synthesize the plant-wide causal model, Fault-Causality Graph (FCG) from specific Fault-Behavior models of the each unit process, which are derived from generic Fault-Behavior models and Structure-Role model. To validate the proposed modeling method and algorithm, a system for building FCG model is developed on G2, an expert system development tool. Case study such as CSTR with recycle using the developed system showed that the proposed method and algorithm were remarkably effective in synthesizing the causal knowledge models for diagnosis of chemical processes.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.7-13
• /
• 2011

Matrix multiplication is a fundamental operation of linear algebra and arises in many areas of science and engineering. This paper introduces an efficient parallel matrix multiplication scheme on N ${\times}$ N mesh-connected SIMD array processor, called multiple hierarchical SIMD architecture (HMSA). The architectural characteristic of HMSA is the hierarchically structured control units which consist of a global control unit, N local control units configured diagonally, and $N^2$ processing elements (PEs) arranged in an N ${\times}$ N array. PEs are communicating through local buses connecting four adjacent neighbor PEs in mesh-torus networks and global buses running across the rows and columns called horizontal buses and vertical buses, respectively. This architecture enables HMSA to have the features of diagonally indexed concurrent broadcast and the accessibility to either rows (row control mode) or columns (column control mode) of 2D array PEs alternately. An algorithmic mapping method is used for performance evaluation by mapping matrix multiplication on the proposed architecture. The asymptotic time complexities of them are evaluated and the result shows that paralle matrix multiplication on HMSA can provide significant performance improvement.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.44-55
• /
• 2001

MAC(Multiply and ACcumulate) is the core operation of multimedia data processing. Because MAC units implemented on traditional DSP units or embedded processors have latency of three cycles and cannot operate on multiple data simultaneously, then, performances are seriously limited. Many high end general purpose microprocessors have SIMD MAC unit as a functional unit. But these high end MAC units must support pipeline structure for various operation modes and high clock frequency, which makes control logic complex and increases chip area. In this paper, a 64bit SIMD MAC unit for embedded processors is designed. It is implemented to have a latency of one clock cycle to remove pipeline control logics and a minimal area overhead for SIMD support is added to existing Booth multipliers.

• Structural Engineering and Mechanics
• /
• v.61 no.4
• /
• pp.453-461
• /
• 2017

This paper presents the series multiple tuned mass dampers (STMDs) to suppress the resonant vibrations of railway bridges under the passage of high-speed trains (HSTs). A STMD device consisting of two spring-mass-damper units connected each other in series is installed on the bridge. In solution, bridge is modeled as a simply-supported Euler-Bernoulli beam with constant cross-section, and vehicle is simulated as a series of moving forces with constant speed. By the assumed mode method, the governing equations of motion of the beam-TMD device coupled system traversed by a moving train are obtained. The optimum values for the parameters of the STMD device are obtained for the criterion based on the minimization of the maximum dynamic displacement of the beam at its midspan. Single TMD and multiple TMDs in parallel are also considered for demonstration of the STMD device's performance. The results show that STMDs are effective in bridge vibration suppression and robust to parameters' change in the main system and the absorber itself.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2358-2361
• /
• 2003

In this paper, parallel control method that enables coordinating operations of multiple mini ice storage air conditioner is proposed based on LonWorks system. The proposed parallel control method is a kind of master/slave control method based on LonTalk network communication. In the control method, master controller leading whole system operations is determined by date to avoid the disproportion of outdoor unit operations. In addition to the above, duty shift control method is proposed to avoid redundant operations of outdoor units and to equalize the operation frequencies of them. Through some simulation tests, the proposed parallel control method and the duty shift control method are evaluated and the efficiencies of them are validated by comparing with existing methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1265-1270
• /
• 1990

A prototype integrated system and its theories for distributed SISO control structure synthesis of complete chemical plants is developed. The scope of this work includes control structure synthesis not only of simple units with unspecified control loops but also of the complex process at preliminary and basic design stage. Hierarchical approach and dual-decomposition strategy (that is multi-layer decomposition and multi-echelon decomposition) is applied to this system. Because automatic control structure synthesis of complex plants is a problem defined as a series of knowledge-intensive tasks within multiple spaces, the established methodology is complemented by not only techniques from knowledge-based expert systems but also shortcut and rigorous control theories. This system is used for education of control designers, process engineers, operators and students as well as for operability studying, in-line and on-line process control structure synthesis.

• Journal of Chest Surgery
• /
• v.25 no.7
• /
• pp.685-692
• /
• 1992

In spite of multiple technical advances, large amount of homologous blood transfusions usually required for open heart surgery. Because the complications associated with transfusion are increased as the number of homologous transfusion increase, especially as transfusion related acquired immunodeficiency syndrome has appeared in recent years, such risks have stimulated recent interest in the use of autologous blood. This is a report concerning 23 consecutive adult autologous donors[autologous group] who had elective cardiac surgery at the Yonsei Cardiovascular Center, Yonsei University College of Medicine, from march, 1990 to august, 1991. A similar group of 23 patients operated during the same periods without autologous blood donation was used for comparison [control group] to investigate the effect of predonated autologous blood in decreasing the need of homologous transfusion and to investigate predonation related adverse effect. Autologous group consisted of 15 men and 8 women. Control group consisted of 7 men and 16 women. There were no significant differences in mean age, hemoglobin, hematocrit, RBC count, platelet count and prothrombin time on admission between the two groups. The mean autologous blood donation in autologous group was 2.2 units. In 10[43.5%] of the 23 atuologous group patients, no homologous RBC products transfusion was required. However, all patients required homologous transfusion in control group. In autologous group, patients required less homologous RBC products than control patients[2.1 units versus 5.3 units; p<0.001]. There were no significant differences in hemoglobin, hematocrit, RBC count and platelet count between the two groups before discharge. There were no serious complications related to preoperative blood donation, although 3 patients complained of mild dizziness during donation We conclude that preoperative autologous predonation of blood is a safe and effective method for reducing homologous transfusion and is recomended in all patients undergoing elective cardiac surgery except limited contraindications such as severe aortic valve stenosis or unstable angina pectoris.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1178-1189
• /
• 2015

A non-isolated Multiple Input Converter (MIC) with an input port, two storage ports and a load port is proposed. The synthesis of the proposed four port converter with its switch realization is presented. A steady state analysis of each operating mode with a small-signal model is derived, and a stability analysis is done. A mode selection controller is proposed to automatically choose a specific operating mode based on the voltage levels of the different source and storage units. In addition, a voltage control loop is used to regulate the output voltage. A 200W prototype is built with a TMS320F28027 DSP controller to test the feasibility of the operating modes. Simulation and experimental results show the ability of the proposed converter to handle multiple inputs either individually or simultaneously.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.543-548
• /
• 2020

The purpose of this study is to implement various movements of multiple objects using a small number of power devices in producing a kinetic design, achieving an effect similar to a work comprised of multiple objects controlled using multiple power devices. While it is more typical to control various objects using multiple power devices, the use of multiple devices leads to higher costs and heavier overall weight. In addition, more power is required to operate the multiple power devices. This study applied a mechanism that allows multiple objects to perform various movements using a small number of power devices. The mechanism significantly reduces overall weight and power consumption. In addition, various movements could be expressed by increasing the rows and columns of objects through the use of the camshaft structure that changed the position and shape of the cam and the use of bevel gears. The significance of this study lies in presenting a new method of controlling multiple objects for designers involved in kinetic design.