• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.126-133
• /
• 2004

Photogrammetry, as its name implies, is a 3-dimensional coordinate measuring technique that uses photographs as the fundamental medium for metrology. In the last few years the accuracy of photogrammetry has increased dramatically thanks to the rapid advance of digital camera manufacturing technique. This paper discusses photogrammetric measurement of the interface surface of MSC(Multi-Spectral Camera), which is a main payload of KOMPSAT-2. Total 24 paper targets on the objective surfaces and two scale bars calibrated with high accuracy were used for measurement, and multiple images were taken from 11 different camera angles by using a spacecraft rotation dolly. As a result of analysis, 3D coordinates of each targeted point were obtained and the flatness value based on the selected reference plane was calculated and compared with the pre-determined requirement. The technique acquired by this study is expected to be used for the 3D precise measurement of ultra-light weight and inflatable space structures such as a satellite antenna and a solar array.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.964-972
• /
• 2009

Wireless mesh network (WMN) is emerging a future core technology to resolve many problems derived from exist wireless networks by employing multi-interface and multi-channel. Ability to utilize multiple channels in WMNs substantially increases the effective bandwidth available to wireless network nodes. However, minimum interference channel assignment algorithms are required to use the effective bandwidth in multi-channel environments. This paper proposes a cluster-based minimum interference channel assignment (MI-CA) algorithm to improve the performance of WMN. The MI-CA algorithm is consists of Inter-Cluster and Intra-Cluster Intrchannel assignment between clusters and in the internal clusters, respectively. The Inter-Cluster channel assignment assigns a barebone channel to cluster heads and border nodes based on minimum spanning tree (MST) and the Intra-Cluster channel assignment minimizes channel interference by reassigning ortasgonal channels between cluster mespann. Our simheation results show that MI-CA can improve the performance of WMNs by minimizing channel interference.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.153-162
• /
• 2018

The importance of energy harvesting technique is increasing due to the elevated level of demand for sustainable power sources for wearable device applications. In this study, we developed an Energy Harvesting wearable Platform(EH-P) architecture which is used in the design of a multi-energy source based on TENG. The proposed switching circuit produces power with higher current at lower voltage from energy harvesting sources with lower current at higher voltage. This can powers microcontrollers for a short period of time by using PV and TENG complementarily placed under hard conditions for the sources such as indoors. As a result, the whole interface circuit is completely self-powered with this makes it possible to run of sensing on a Wearable device platform. It was possible to increase the wearable device life time by supplying more than 29% of the power consumption to wearable devices. The results presented in this paper show the potential of multi-energy harvesting platform for use in wearable harvesting applications, provide a means of choosing the energy harvesting source.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.415-427
• /
• 1998

FIAS (Flood Inundation Analysis System) using Arc/Info is developed and applied to the South Han River basin. The DWOPER model is revised and expanded to handle simultaneous multiple overtopping and/or breaking and to estimate the inundation depth and extents. The model is applied to an actual levee overtopping case, which occurred on August 23~27, 1995 in the South Han River. Stage hydrographs inside and outside of the levee are compared, then inundated discharges from overbank spilling are computed. The Graphic User Interface is developed with AML(Arc/Info Macro Language). Two-and three-dimensional inundation maps by Arc/Info are presented. The computed inundation extends agree with observations in terms of inundation depth and flooded area. Keywords : River, Floodwave, Flood Inundation, Geographic Information System.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.71-78
• /
• 2018

This paper presents the assembling of multiple patches based on the single patch isogeometric formulation for the shear deformable shell element given in the previous study. The geometrically exact shell formulation has been accomplished with the shell theory based formulation and the generalized curvilinear coordinate system directly derived from the given NURBS geometry. For the knot elements matching across adjacent surfaces, the zero-th and first parametric continuity conditions are considered and the corresponding coupling constraints are implemented by a master-slave formulation between adjacent patches. The constraints are then enforced by a substitution method for condensation of the slave variables, thereby reducing the model size. Through numerical investigations, the important features of the first parametric continuity condition are confirmed. The performance of the multi-patch shell models is also examined comparing the rate of convergence of response coefficients for the zero and first order continuity conditions and continuity in coupling boundary between two patches is confirmed.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.68-79
• /
• 2018

The Ki-Jang research reactor (KJRR), a new research reactor in Korea, is being planned to fulfill multiple purposes. In this study, as an assessment of the environmental radiological impact, we characterized the atmospheric dispersion and deposition of radioactive materials released by an unexpected incident at KJRR using the weather research and forecasting-mesoscale model interface program-California Puff (WRF-MMIF-CALPUFF) model system. Based on the reproduced three-dimensional gridded meteorological data obtained during a 1-year period using WRF, the overall meteorological data predicted by WRF were in agreement with the observed data, while the predicted wind speed data were slightly overestimated at all stations. Based on the CALPUFF simulation of atmospheric dispersion (${\chi}/Q$) and deposition (D/Q) factors, relatively heavier contamination in the vicinity of KJRR was observed, and the prevailing land breeze wind in the study area resulted in relatively higher concentration and deposition in the off-shore area sectors. We also compared the dispersion characteristics between the PAVAN (atmospheric dispersion of radioactive release from nuclear power plants) and CALPUFF models. Finally, the meteorological conditions and possibility of high doses of radiation for relatively higher hourly ${\chi}/Q$ cases were examined at specific discrete receptors.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.177-186
• /
• 2006

This paper presents the development of a certain highly efficient authoring tool for constructing realistic 3D virtual space using image-based rendering techniques based on a virtual space map. Unlike conventional techniques such as TIP, for constructing a small 3D virtual space using single image, the authoring tool developed herein produces a wide 3D virtual space using multiple images. This tool is designed for constructing each small 3D virtual space for each input image, and for interconnecting these 3D virtual spaces into a wide 3D virtual space using a virtual space map. The map consists of three elements such as specific room, link point and passageway, and three directions. It contains various information such as the connection structure, the navigation information and so on. Also, the tool contains a user interface that let users construct the wide 3D virtual space easily.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.7
• /
• pp.945-951
• /
• 2007

Noise cancellation is essential for the devices which use speech as an interface. In real environments, speech quality and recognition rates are degraded by the auditive noises coming near the microphone. In this paper, we propose a noise cancellation algorithm using stereo microphones basically. The advantage of the use of multiple microphones is that the direction information of the target source could be applied. The proposed noise canceller is based on the Wiener filter. To estimate the filter, noise and target speech frequency responses should be known and they are estimated by the spectral classification in the frequency domain. The performance of the proposed algorithm is compared with that of the well-known Frost algorithm and the generalized sidelobe canceller (GSC) with an adaptation mode controller (AMC). As performance measures, the perceptual evaluation of speech quality (PESQ), which is the most widely used among various objective speech quality methods, and speech recognition rates are adopted.

• Journal of the Korea Society for Simulation
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2015

In this paper, the multi-resolution simulation of standard linkage architecture is consists of the engineering-level (QUEST), engagement-level (SADM), the mission-level (EADSIM). It was developed the engineering-level model using battle experiment integrated development environment in the battle experimental engineering system. The engagement level model was developed using the SADM and the mission-level model was developed using EADSIM. The standard linkage architecture is designed and implemented in order to interlocking model of multiple layers. Each different simulation programs in a distributed environment was designed by HLA interface specifications for satisfying interworking. Also the integrated interoperation gateway was developed for relaying the each different simulation programs. The effective naval weapon system for measure of effectiveness develops using to improve the fidelity of the model between the various layers through multi-resolution interoperation simulation. According to the operator requirement is quickly battlefield environment can be constructed. The other simulation program that being designed through standards linkage architecture can linkage easily and efficiently.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.27-33
• /
• 2009

Content used in mashups is typically obtained from a third party source through a public interface or API (web services). Other methods of obtaining content for mashups include Web feeds (e.g. RSS or Atom), and screen scraping. A mashup or meshup Web application has two parts: A new service delivered through a Web page, using its own data and data from other sources. The blended data, made available across the Web through an API or other protocols such as HlTP, RSS, REST, etc. There are many types of mashups, such as consumer mashups, data mashups, and Business Mashups. The most common mashup is the consumer mashup, which are aimed at the general public. Examples include Google Maps, iGuide, and RadioClouds. 4D Wall-map display is data mashups combine similar types of media and information from multiple sources into a single representation. This technology focus data into a single presentation and allow for collaborative action among ITS-related information sources.