• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.160-174
• /
• 2014

The purpose of this paper is to develop a meso-scale grid-based continuous hydrological model and apply to assess the future watershed hydrology by climate change. The model divides the watershed into rectangular cells, and the cell profile is divided into three layered flow components: a surface layer, a subsurface unsaturated layer, and a saturated layer. Soil water balance is calculated for each grid cell of the watershed, and updated daily time step. Evapotranspiration(ET) is calculated by Penman-Monteith method and the surface and subsurface flow adopts lag coefficients for multiple days contribution and recession curve slope for stream discharge. The model was calibrated and verified using 9 years(2001-2009) dam inflow data of two watersheds(Chungju Dam and Soyanggang Dam) with 1km spatial resolution. The average Nash-Sutcliffe model efficiency was 0.57 and 0.71, and the average determination coefficient was 0.65 and 0.72 respectively. For the whole Han river basin, the model was applied to assess the future climate change impact on the river bsain. Five IPCC SRES A1B scenarios of CSIRO MK3, GFDL CM2_1, CONS ECHO-G, MRI CGCM2_3_2, UKMO HADGEMI) showed the results of 7.0%~27.1 increase of runoff and the increase of evapotranspiration with both integrated and distributed model outputs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.466-475
• /
• 2020

Current performance evaluation of call center employees is dependent on the number of calls they have resolved, regardless of the individual and social characteristics of employees. However, since call center tasks are highly customer-oriented and emotional laborious, individual capability as well as social characteristics of employees is critical to performance. Therefore, this study analyzed the relationship between employees' individual/social characteristics and their performance. To extract individual characteristics, a repertory grid technique was employed, whereas social network analysis was conducted to extract the social characteristics of employees. Using individual and social characteristics as input variables, multiple regression was conducted to analyze the effect of each variable on performance. As a result, in-degree centrality of dining network, initiative characteristics, open characteristics, and enjoyment of studying were determined to be important variables for performance. This study is expected to be used in both performance management and human resource management of call center practices.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.172-178
• /
• 2022

In this paper, water meter AMR(automatic meter reading), one of the core technologies of smart water grid, using LoRa IoT network is studied. The main content of the research is to develop the network system and show the test results that one PC server receives the readings of water meters from multiple households through LoRa communication and stores them in the database, and at the same time sends the data to the web server database through internet. The system also allows users to monitor the meter readings using their smartphones. The hardware and firmware of the main board of the digital water meter are developed. For a PC server program, MDMS(meter data management system) is developed using Visual C#. The app program running on the user's smartphone is also developed using Android Studio. By connecting each developed parts, the total network system is mounted on a flow test bench in the laboratory and tested. For the fields test, 5 places around the university are selected and the transmission distances are tested. The test result show that the developed system can be applied into the real field. The developed system can be expanded to various social safety nets such as monitoring the living alone or elderly with dementia.

• The KIPS Transactions:PartC
• /
• v.16C no.4
• /
• pp.505-510
• /
• 2009

Sensor networks are composed of a great number of sensor nodes. Since all sensor nodes are energy-restricted and hard to recharge, it is very important.However, the energy consumption may significantly increase if mobile sources or sinks exist in sensor networks. The reason is that the routing information for mobile sources and sinks needs to be update frequently for efficientdata delivery. The routing algorithm supporting mobile sinks should consider not only continuous data delivery but also the energy consumption of sensor nodes. However, most of the existing research focuses on even energy consumption while the mobility of sinks and sources is rarely consider. In this paper, we propose an efficient routing protocol with multiple virtual grids to reduce energy consumption and improve packets delivery efficiency. Then this paper considers the mobility. Simulation results show that our algorithm can guarantee high data delivery ratio and lower average delivery delay, while consuming lower energy than existing routing protocols in sensor networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.722-728
• /
• 2005

In this paper, the reverse-link performance of synchronous DS-CDMA cellular networks is investigated in Rician multipath fading environments. The system's performance is evaluated in terms of the achievable average bit error rate BER) and the user capacities of two different network layouts, namely those of a uniform grid of hexagonal multiple cells and a single isolated cell. In the multiple-cell scenario, the impact of the other cells' interference on the attainable capacity of the synchronous DS-CDMA uplink is investigated. Upon comparing both networks to a conventional asynchronous CDMA system, we demonstrate an achievable user capacity gain of $25\%$ to $56\%$ for synchronous uplink transmissions over that of the corresponding asynchronous transmission scenario at BER = $10^{-3}$.

• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.205-212
• /
• 2008

In the environment with multiple heterogeneous wireless sensor networks with a single point of sensed data collection or a gateway (GW), relay points (RPs) may be required for the energy efficient delivery of sensed data from static or mobile sinks to the GW. The optimal placement of RPs becomes an even more difficult problem if static sinks are dynamically added or the trajectory of mobile sinks can not be known in advance. In order to resolve this problem, we propose a mechanism to deploy RPs in a grid pattern and to use the tree-based relaying network for reducing the cost of the RP and for reducing the control overhead incurred by the route setup from sinks to the GW. For the performance evaluation of our proposed mechanism, we have carried out a numerical analysis on a single route setup from a sink to the GW and, for more general performance evaluations, ns-2 based simulations have been carried out. According to the performance evaluation results, our tree-based relaying network mechanism outperforms that based on AODV in terms of the data delivery time, the network service time and the control overhead.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.153-159
• /
• 2011

The MUSIC (MUltiple SIgnal Classification) method estimates the directions of arrival (DOAs) of the signals impinging on a sensor array based on the fact that the noise subspace is orthogonal to the signal subspace. In the conventional MUSIC, an estimate of the basis for the noise subspace is obtained by eigendecomposing the sample matrix, which is computationally expensive. In this paper, we present a simple DOA estimation method which finds an estimate of the signal subspace basis directly from the columns of the sample matrix from which the noise power components are removed. DOA estimates are obtained by searching for minimum points of a cost function which is defined using the estimated signal subspace basis. The minimum points are efficiently found through the Brent method which employs parabolic interpolation. Simulation shows that the simple estimation method virtually has the same performance as the complex conventional method based on the eigendecomposition.

• Composites Research
• /
• v.31 no.4
• /
• pp.145-150
• /
• 2018

Various structural health monitoring (SHM) systems have been suggested for aerospace industry in order to increase its life-cycle and economic efficiency. In the case of aircraft structure madden with metal, a major concern was hot spots, such as notches, bolts holes, and where corrosion or stress concentration occurs due to moisture or salinity. However, with the increasing use of composites in the aerospace industry, further advanced SHM systems have been being required to be applied to composite structures, which have much complex damage mechanism. In this paper, a method of acoustic emission localization for composite structures using Q-switched laser and multiple Amplifier-integrated PZTs have been proposed. The presented technique aims at localization of the AE with an error in distance of less than 10 mm. Acoustic emission simulation and the localization attempt were conducted in the composite structure to validate the suggested method. Localization results, which are coordinates of detected regions, grid plots and color intensity map have been presented together to show reliability of the method.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2023

This paper presents an optimal path planning strategy for aerial searching and surveying of a user-designated area using multiple Unmanned Aerial Vehicles (UAVs). The method is designed to deal with a single unseparated polygonal area, regardless of polygonal convexity. By defining the search area into a set of grids, the algorithm enables UAVs to completely search without leaving unsearched space. The presented strategy consists of two main algorithmic steps: cellular decomposition and path planning stages. The cellular decomposition method divides the area to designate a conflict-free subsearch-space to an individual UAV, while accounting the assigned flight velocity, take-off and landing positions. Then, the path planning strategy forms paths based on every point located in end of each grid row. The first waypoint is chosen as the closest point from the vehicle-starting position, and it recursively updates the nearest endpoint set to generate the shortest path. The path planning policy produces four path candidates by alternating the starting point (left or right edge), and the travel direction (vertical or horizontal). The optimal-selection policy is enforced to maximize the search efficiency, which is time dependent; the policy imposes the total path-length and turning number criteria per candidate. The results demonstrate that the proposed cellular decomposition method improves the search-time efficiency. In addition, the candidate selection enhances the algorithmic efficacy toward further mission time-duration reduction. The method shows robustness against both convex and non-convex shaped search area.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.2
• /
• pp.55-64
• /
• 2008

This study aims to analyze the sensitivity of WSM(weighted scenario method)-AHP method according to variation of nonlinear exponent for accessibility criteria, which are used to make urbanization potential maps with the optimal weighting value for multiple criteria in grid-based GIS technique. Besides this study tried to develop WSM-AHP2 which is simplified by using rank of the potential value for each scenario. The two methods were applied to the test area, Suwon city located south area of Seoul, with time series land-use maps of 1986 and 1996. The evaluation system of urbanization potential have 7 criteria including 6 accessibility criteria. The results of WSM-AHP2, the optimal weighting values and their corresponding potential maps, have almost similar with those of WSM-AHP. In the application of CA(cellular automata) model for expansion of urbanized area using the three potential maps by WSM-AHP, WSM-AHP2, and specialists's AHP evaluation, it also showed that the accuracy of simulation for actual urban area is the highest in the potential map of WSM-AHP, followed by WSM-AHP2 and specialists's AHP evaluation. From the results of this study, WSM-AHP and simplified WSM-AHP2 will be used to generate the optimal potential maps for land-use planning in urban fringe area.