• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.69-78
• /
• 2023

The purpose of this paper is to develop a scalable grey predictive controller with unavoidable random delays. Grey prediction is proposed to solve problems caused by incorrect parameter selection and to eliminate the effects of dynamic coupling between degrees of freedom (DOFs) in nonlinear systems. To address the stability problem, this study develops an improved gray-predictive adaptive fuzzy controller, which can not only solve the implementation problem by determining the stability of the system, but also apply the Linear Matrix Inequality (LMI) law to calculate Fuzzy change parameters. Fuzzy logic controllers manipulate robotic systems to improve their control performance. The stability is proved using Lyapunov stability theorem. In this article, the authors compare different controllers and the proposed predictive controller can significantly reduce the vibration of offshore platforms while keeping the required control force within an ideal small range. This paper presents a robust fuzzy control design that uses a model-based approach to overcome the effects of modeling errors. To guarantee the asymptotic stability of large nonlinear systems with multiple lags, the stability criterion is derived from the direct Lyapunov method. Based on this criterion and a distributed control system, a set of model-based fuzzy controllers is synthesized to stabilize large-scale nonlinear systems with multiple delays.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1509-1512
• /
• 1996

This paper presents an intelligent autopilot for STT missiles with multiple controllers. The mixed H$_{2}$/H$_{\infty}$ control technique is applied for each controller and implemented by using the genetic searching algorithm. To facilitate automatic switching of multiple controllers under different operating conditions, an error based switching scheme is also combined with the multiple controllers at the higher level, which constitutes a hierarchical intelligent control system. It is shown via computer simulation that the proposed autopilot outperforms the conventional one..

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.48-48
• /
• 2000

We developed a wireless communication system for multiple instrumentation system. The developed system has a function of remote instrumentation and PLC(Programmable Logic Controller) control. The system consists of CC(Control and Communication) protocol, wireless media access and physical media system. For multiple wireless communication, we propose a hub polling protocol based on master-slave control concept. To show the validity of the developed system, several experiments are illustrated.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2423-2425
• /
• 2000

A wireless communication module for multiple PLC was developed. The function of the developed system are dual communication, concurrent multiple communication. PLC control, d interpretation of PLC command, and A/D D/A converting. The multiple communication approach is based on master-slave control concept. To show validity of the developed module, severial experiments are illustrated.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.6
• /
• pp.722-728
• /
• 2003

In this paper, we propose a fuzzy traffic controller of Sugeno`s fuzzy model so as to model the nonlinear characteristics of controlling the traffic light. It use a degree of the traffic congestion of the preceding roads as an input so that it can cope with traffic congestion appropriately, which causes the loss of fuel and our discomfort. First, in order to construct fuzzy traffic controller of Sugeno`s fuzzy model, we model the control process of the traffic light by using Mamdani`s fuzzy model, which has the uniform membership functions of the same size and shape. Second, we make Mamdani`s fuzzy model with the non-uniform membership functions so that it can exactly reflect the knowledge of experts and operators. Last, we construct the fuzzy traffic controller of Sugeno`s fuzzy model by learning from the input/output data, which is retrieved from Mamdani`s fuzzy model with the non-uniform membership functions. We compared and analyzed the fixed traffic light controller, the fuzzy traffic controller of Mamdani`s fuzzy model and the fuzzy traffic controller of Sugeno`s fuzzy model by using the delay time and the proportion of the entered vehicles to the occurred vehicles. As a result of comparison, the fuzzy traffic controller of Sugeno`s fuzzy model showed the best performance.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.677-682
• /
• 2023

A large number of motors and sensors are used to drive a humanoid robot. In order to solve the wiring problem that occurs when connecting multiple actuators, a controller based on a communication network has been used, and CAN, which is advantageous in terms of cost and a highly reliable communication protocol, was mainly used. In terms of the structure of the controller, a torque control type structure that is easy to implement an advanced algorithm into the upper controller is preferred. In this case, the low communication bandwidth of CAN becomes a problem, and in order to obtain sufficient communication bandwidth, a communication network is configured by separating into a plurality of CAN networks. In this study, a stability analysis on transmission time delay is performed for a multi-motor control system in which high-speed FlexRay and low-speed CAN communication networks are hierarchically connected in order to obtain a high communication bandwidth, and sensor information and driving signals are delivered within the allowed transmission time. The proposed hierarchical network-based control system is expected to improve control performance because it can implement multiple motor control systems with a single network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1913-1920
• /
• 2009

An intelligent accurate sun tracking controller for solar lighting system was developed. This controller can detect the faulty sensor and correct the error signal based on Principle Component Analysis theory. A fuzzy controller was developed to control the tracker by using the collected sensor signal for precise position control. Also a multiple range searching sensor module for sun tracking was designed. To show the validity of the developed system, some experiments in the field were illustrated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.922-929
• /
• 2009

This paper deals with the State-Dependent Riccati Equation (SDRE) Technique for the design of helicopter nonlinear waypoint guidance controller. To generate the flight guidance through multiple waypoints, we use the trigonometric spline. The controller design and its validation is based upon a level 2 simulation helicopter model and the designed SDRE controller is applied to the trajectory tracking problems. To validate the designed SDRE controller, the simulation environment of high fidelity helicopter model is developed using three independent computers. This paper focuses on the validation the present SDRE controller through the helicopter waypoint guidance simulation.

• The Journal of Korea Robotics Society
• /
• v.2 no.3
• /
• pp.212-220
• /
• 2007

This paper proposes a method of avoiding obstacles and tracking a moving object continuously and simultaneously by using new concepts of virtual tow point and fuzzy danger factor for differential wheeled mobile robots. Since differential wheeled mobile robot has smaller degree of freedom to control and are non-holonomic systems, there exist multiple solutions (trajectories) to control and reach a target position. The paper proposes 'fuzzy danger factor' for obstacles avoidance, 'virtual tow point' to solve non-holonomic object tracking control problem for unique solution and three kinds of fuzzy logic controller. The fuzzy logic controller is policy decision controller with fuzzy danger factor to decide which controller's result is more valuable when the mobile robot is tracking a moving object with obstacles to be avoided.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.126-132
• /
• 2016

The root-locus method is often employed when a controller is designed to find controller gain. It is usually used to determine one parameter gain while most controllers for industrial applications have more than one controller gain. For example PID controller has three controller gains, i.e. P, I, and D gains. Thus the conventional root-locus technique cannot complete the design of a controller with more than one controller gain. One way to overcome this drawback has been to apply the root-locus technique for one parameter while other parameters are assumed to be proportional to the parameter or to be constant. However this approach could lead to limited performance of the controller and if we try to adjust the proportional ratio or constants then it could be a long and tedious process of trial and error. Thus it is required to find an effective method for the root-locus technique to design controllers with more than one parameter. To this end this paper proposes an extended root-locus method for controllers with two parameters. In this paper Matlab is used as a computation tool to show the effectiveness of our method by solving examples numerically. As a result we obtained an extended root-locus illustrated in two-dimensional space for a control system with two parameters. The paper then presents how to find two controller gains based on this result of the extended root-locus. The main idea is that we can find the parameters by approaching the desired poles. It is expected that the proposed idea will help control engineers to easily design control systems using the root-locus technique, resulting in more accurate and faster control systems. Note that the extended root-locus idea can be applied to controller design problems with multiple parameters.