• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1052-1057
• /
• 2004

Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제22권1호
• /
• pp.26-31
• /
• 2016

Migrim(Migration enhanced Grid Middleware)은 임베디드 단말과 다중 서버들 간의 통신 미들웨어이다. 기존의 통신 미들웨어는 단말이 서버의 자원 상태를 알지 못하기 때문에, 특정 서버에 부하가 집중될 경우에도 그 서버로 계속 요청을 보내는 문제가 있다. 또한 단말은 서버가 가진 정보를 알 수 없기 때문에, 트랜잭션 처리 결과에 대한 정확도를 보장하기 어렵다. 병목현상과 응답 정확도 문제 해결을 위해, 본 논문에서는 Migrim에 적용한 커넥션 이전과 트랜잭션 이전 기법을 제안한다. 커넥션을 다른 서버로 위임하는 과정인 커넥션 이전을 통해 전체 서버에 부하를 균등하게 분산시킬 수 있고, 트랜잭션 처리를 다른 서버로 위임하는 과정인 트랜잭션 이전을 통해 응답의 정확도를 높일 수 있다.

• Structural Engineering and Mechanics
• /
• 제62권4호
• /
• pp.465-475
• /
• 2017

Photovoltaic (PV) panels are used in high-rise buildings to convert solar energy to electricity. Due to the considerable energy consumption of high-rise buildings, applying PV technology is of great significance to energy saving. In the application of PV panels, one of the most important construction issues is the connection of the PV panel with the main structures. One major difficulty of the connection design is that the PV panel connection consists of two separate components with coupling and indeterminate dimension. In this paper, the gap element is employed in these two separated but coupled components, i.e., hook and catch. Topology optimization is applied to optimize and design the cross-section of the PV panel connection. Pareto optimization is conducted to operate the optimization subject to multiple load scenarios. The initial design for the topology optimization is determined by the common design specified by the Technical Code for Glass Curtain Wall Engineering (JGJ 102-2003). Gravity and wind load scenarios are considered for the optimization and numerical analysis. Post analysis is conducted for the optimal design obtained by the topology optimization due to the manufactory requirements. Generally, compared with the conventional design, the optimized connector reduces material use with improved structural characteristics.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.10-11
• /
• 2013

Green Frame is a column-beam system formed by composite precast concrete column and beam connected with steel buried in both members. During the installation of Green columns, the columns of Green Frame, covering 3 floors per each piece and beams, the eccentricity can be observed due to the construction error and the weight of beam itself. Such eccentricity may have a little influence on a single frame, yet, it can develop critical issues to the installation of subsequent beams or beams on the upper floors in the context of a building as a whole that has multiple frames. These issues lead to delay in frame installation, decrease of productivity and increase of cost, etc. Therefore, this study presents a steel-joint connection method in order to solve the issues. The steel-joint connection method exists on slope plane and reinforcing plate in steel frame buried in composite PC members. Through this method, the issues can be resolved without requiring additional equipment or manpower.

• 한국지반공학회논문집
• /
• 제24권7호
• /
• pp.61-73
• /
• 2008

다수의 말뚝을 캡(확대기초)으로 연결하여 하중을 지지하는 다주식 기초에 대하여 캡의 연결부를 강결합 조건과 힌지결합 조건으로 구분하여 말뚝 반력 해석의 합리성을 분석하였으며, 널리 사용 중인 탄성변위법과 라멘식 프레임 해석에 기반한 비선형 해석기법을 비교하여 검토하였다. 특히 실제 해상 장대교량의 조건을 대상으로 상부구조와 기초를 연계한 전체 구조계 해석 결과를 분석하여 말뚝머리 구속 조건에 대한 기초 부재 단면력 산정의 적정성을 파악하였다. 이를 위해 캡과 연결된 각 말뚝에서 발생하는 휨모멘트, 전단력, 압축력 등 반력을 산정하고 PM상관도 분석과 지지력 산정을 통해 말뚝 부재의 안정성을 검토하였다. 일반적인 규모의 교량, 또는 강성이 크지 않은 말뚝을 적용한 기초에서는 말뚝-캡 결합 조건에 따른 말뚝 단면 설계의 차이가 현저하지 않으나, 말뚝이 지면 위로 일정 길이 이상 돌출되는 다주식 기초의 해상교량에서는 말뚝머리를 힌지로 고려할 경우 지중부에서 매우 큰 휨모멘트와 전단력이 유발되며, 말뚝머리의 수평변위량이 극단적으로 증가하였다. 해상 장대교량에 대해서는 비현실적 가정조건에 기반한 탄성변위법 보다는 말뚝머리를 캡에 강결합하고 말뚝이 탄성판에 지지된 보로 간주하는 라멘(rahmen) 모델링을 통해 상부구조와 연계한 전체 구조계 해석을 수행하는 것이 바람직하다.

• Journal of Information Technology Applications and Management
• /
• 제13권3호
• /
• pp.1-28
• /
• 2006

In the ubiquitous computing environments. people usually carry multiple information technology devices with them. Personal device network (PDN) refers to the way how people connect multiple IT devices for their personal as well as professional purposes. Even though it has been Quite popular to construct the PDN in ubiquitous computing context, not much research has been conducted on how people actually connected multiple devices and what influences their methods of connection. In this paper we conducted a content analysis on community bulletin boards of IT devices and a contextual inquiry with expert users of PDN for investigating the configurations with which users connect multiple IT devices. Base on the results of two related studies, we identified three major types of PDN configurations, and key factors that influence the configurations of PDN. We conclude this research with guidelines to design a set of devices for each of the three configuration types.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.86-89
• /
• 1998

Multiple types of information in a multimedia service are delivered though multiple virtual connections on ATM network, while each virtual connection may be controlled independently. A multimedia service requires an associative relationship among multiple information streams to provide required harmonization. There may be required additional traffic descriptors to guarantee the required harmonization among multiple information streams in a multimedia service. For buffering of large bandwidth information stream(e.g., video), extremely large buffer size is necessary, but this approach should not be efficient way to compensate a severely delayed cells/blocks experienced at network. The best way to solve this problem will be minimization of relative-delayed-transfer of cells/blocks to application processes through ATM network control. To minimize a delayed transfer the mapping between relative delay parameter(i.e., associative Group QoS parameters) and per-VC traffic descriptor will be necessary. This paper is present additional functions and parameters to interpret the mapping between relative delay parameters(i.e., associative Group QoS parameters) and per-VC traffic descriptors in ATM API for multimedia application services.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (1)
• /
• pp.18-20
• /
• 1998

JDBC는 Java 응용 프로그램이나 apllet에서 SQL 문을 수행하기 위해서 Javasoft에서 정의한 Java API로서, DBMS에 비의존적이고 플랫폼에도 독립적인 Java 응용 프로그래밍 기법을 제공한다. 일반 DBMS 응용 프로그램과 마찬가지로 Java 응용 프로그램에서도 기존에 구축된 동기종 또는 이기종의 데이터베이스를 동시에 접근해서 처리해야 하는 경우가 발생하다. 이 경우 한 응용 내에서의 여러 DBMS 연결은 불가피하다. 이러한 다중 연결의 지원은 응용 프로그램을 추가하는 작업이나 데이터베이스 자료 변환 작업을 감소시키는 효과가 있다. 이 논문에서는 JDBC 명세서 1.2에 따라 구현된 net-protocol all-Java driver 타입의 JDBC 드라이버가, JDBC 응용 클라이언트와 DBMS드라이버를 관리함으로써 한 Java 응용 프로그램내에서 다중 연결을 지원하는 M-JDBC(Multiple Database supporting)드라이버의 구조를 제시한다.

• Communications for Statistical Applications and Methods
• /
• 제26권2호
• /
• pp.131-148
• /
• 2019

Constant stress partially accelerated life tests are studied according to exponentiated Weibull distribution. Grounded on multiple censoring, the maximum likelihood estimators are determined in connection with unknown distribution parameters and accelerated factor. The confidence intervals of the unknown parameters and acceleration factor are constructed for large sample size. However, it is not possible to obtain the Bayes estimates in plain form, so we apply a Markov chain Monte Carlo method to deal with this issue, which permits us to create a credible interval of the associated parameters. Finally, based on constant stress partially accelerated life tests scheme with exponentiated Weibull distribution under multiple censoring, the illustrative example and the simulation results are used to investigate the maximum likelihood, and Bayesian estimates of the unknown parameters.

• 한국멀티미디어학회논문지
• /
• 제24권8호
• /
• pp.979-987
• /
• 2021

Multiple Sclerosis (MS) can be early diagnosed by detecting lesions in brain magnetic resonance images (MRI). Unsupervised anomaly detection methods based on autoencoder have been recently proposed for automated detection of MS lesions. However, these autoencoder-based methods were developed only for 2D images (e.g. 2D cross-sectional slices) of MRI, so do not utilize the full 3D information of MRI. In this paper, therefore, we propose a novel 3D autoencoder-based framework for detection of the lesion volume of MS in MRI. We first define a 3D convolutional neural network (CNN) for full MRI volumes, and build each encoder and decoder layer of the 3D autoencoder based on 3D CNN. We also add a skip connection between the encoder and decoder layer for effective data reconstruction. In the experimental results, we compare the 3D autoencoder-based method with the 2D autoencoder models using the training datasets of 80 healthy subjects from the Human Connectome Project (HCP) and the testing datasets of 25 MS patients from the Longitudinal multiple sclerosis lesion segmentation challenge, and show that the proposed method achieves superior performance in prediction of MS lesion by up to 15%.