• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.123-133
• /
• 1996

An automatic drum seeder was developed to improve the seeding operation. It consisted of a conveyor to transfer seedling trays, a seed-hopper to supply seeds, a drum to drop seeds on the tray, and an air blower to remove extra seeds. A photo sensor was used to detect the transfer of seedling trays, and its signal was fed into microcomputer which operated a stepping motor driving the drum. The seeds were adhered to the surface of drum by vacuum pressure, and were dropped into tray cells by compressed air. An air connection unit was devised to alternate between vacuum pressure and compressed air. A control program for the system, written in C language, could operate the drum at the given number of revolutions and revolutions per minute. The results showed that the air connection unit could operate well and the seeds were dropped satisfactorily into tray cells. In case of cabbage and perilla seeds, which are regular and spherical shape, the missing rate was low and the single seeding rate was more than 97%. Low missing rate and high multiple seeding rate were observed in lettuce seeds which have narrow ends with tight weight. The missing rate of pepper seed was very high because of heavy weight and irregular shape. To improve the performance of the seeder, adjustment of vacuum pressure based upon shape and weight of the seeds, careful selection of the material of drum, maintenance of consistent air blower pressure, and replacement of stepping motor to DC motor are recommended.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.5
• /
• pp.1354-1372
• /
• 2012

Route establishment in Mobile Ad Hoc Network (MANET) is the key mechanism to a successful connection between a pair of source and destination nodes. An efficient routing protocol constructs routing path with minimal time, less routing overhead and capable of utilizing all possible link connectivity. In general, most on-demand MANET routing protocols operates over symmetrical and bidirectional routing path, which is infeasible due to the inherent heterogeneous properties of wireless devices. Simulation results show that the presence of unidirectional links on a network severely affect the performance of a routing protocol. In this paper, a robust protocol independent scheme is proposed, which enable immediate rediscovery of alternative route for a path blocked by a unidirectional link. The proposed scheme is efficient; route rediscovery is locally computed, which results in significant minimization of multiple route packets flooding. Nodes may exploit route information of immediate neighbors using the local reply broadcast technique, which then redirect the control packets around the unidirectional links, therefore maintaining the end-to-end bidirectional connection. The proposed scheme along with Ad Hoc On-demand Distance Vector (AODV) and AODV-Blacklist routing protocol is investigated over three types of mobility models. Simulation results show that the proposed scheme is extremely reliable under poor network conditions and the route connectivity can be improved by as much as 75%.

• Health Policy and Management
• /
• v.23 no.3
• /
• pp.281-288
• /
• 2013

Background: The purpose of this study is to grasp the factors forming hospital image and to measure evaluation of internal and external customers towards hospital choice factors. Methods: This study is based 4 types of choice factor such as physical, human, accessibility, and connection. Data were assessed using 98 patients and 96 internal employees who work at A general hospital in Seoul and 116 patients and 97 internal employees at B general hospital in Chunkcheongbuk-do. Data were collected with self-administered questionnaires from February 17 to April 29 in 2012 and analyzed SPSS ver. 18.0 by using frequency, t-test, analysis of variance, correlation, and multiple regression. Results: The results of this study show that factors affecting hospital image is significant different between internal and external customers of hospital A and B. Expecially the finding of this study will be applied to improve connection factors in administrative department of hospital for hospital image. Conclusion: This study presents primary data for correct decision making to authorities of local hospitals that have concern about marketing strategy for hospital image.

• The Mathematical Education
• /
• v.53 no.3
• /
• pp.329-355
• /
• 2014

The purpose of this study is to understand the difference of cognitive structure depending on the level of the 6th graders' problem-solving abilities about the division of fraction and to propose a method for improving the 6th graders' understanding about the division of fraction through the word association test. The following is the findings from this study. 1)The lower level students' is, the lower the step that the chunk appeared in cognitive structure is. 2)The basic level students' association frequency between any two concepts was less than the excellent level students and the ordinary level students' it. 3)The basic level students' connection number between concepts was far less than the excellent level students and the ordinary level students' it. 4)The connection between natural number and unit fractions, subtraction of fraction and division of fraction, division of fraction and reduction to common denominator, and division of fraction and common multiple that expected in this study did not appear in the three groups.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.199-209
• /
• 2012

In transport networks, a multi-ring architecture is very useful to facilitate network planning and to design and provide more resilient services for customers. Unlike traditional synchronous optical network multi-rings, the service resiliency of Ethernet-based multi-rings is significantly impacted by the ring hierarchy because a link or node failure in a certain level ring triggers filtering database flush actions in all higher level rings as well as in the ring with the failure, and consequently a large amount of duplicated data frames may be flooded. In this paper, we investigate how the ring hierarchy impacts the service resiliency of multi-ring networks. Based on extensive experiments on various single- and multiple-link failures, we suggest two effective inter-ring connection rules to minimize the transient traffic and to ensure more resilient multi-ring networks. In addition, we consider a flush optimization technique called e-ADV, and show that the combination of e-ADV and multi-ring structures satisfying our inter-ring connection rules results in a more attractive survivability performance.

• The KIPS Transactions:PartA
• /
• v.11A no.6
• /
• pp.433-438
• /
• 2004

In this paper, we describes the development of Bluetooth network Access Point(AP) for the access network connection of Bluetooth devices at home. Unlike headset, mouse, and keyboard, the AP should have capability to support multiple connection and stabilized network throughput. Our AP allows various kinds of Bluetooth terminals to access the access network like xDSL and PSTN(Public Swithced Telephone Network) stably. Especially, users can access the PSTN at home instead of expensive CDMA network through the AP by using the one-phone which is the cellular phone with the Bluetooth module.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.762-768
• /
• 2010

This paper describes the development of a new islanding detection method for inverter-based distributed generation systems, which uses a signal cross-correlation scheme between the injected reactive current and the power frequency deviation. The proposed method injects 1% of the reactive current to the rated current which brings about a negligible degradation of the power quality. It discriminates the islanding state, when the calculated cross-correlation index is larger than 0.5. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software and experimental research with a hardware prototype. The proposed method can detect the islanding state without degrading the power quality at the point of common connection. Further study is required to overcome the cancellation of the injected reactive current from multiple distributed generation units interconnected with the utility grid.

• Structural Engineering and Mechanics
• /
• v.77 no.4
• /
• pp.495-508
• /
• 2021

This study devises a novel approach, namely quadruple 1D convolutional neural network, for detecting connection stiffness reduction in steel truss bridge structure using experimental and numerical modal data. The method is developed based on expertise in two domains: firstly, in Structural Health Monitoring, the mode shapes and its high-order derivatives, including second, third, and fourth derivatives, are accurate indicators in assessing damages. Secondly, in the Machine Learning literature, the deep convolutional neural networks are able to extract relevant features from input data, then perform classification tasks with high accuracy and reduced time complexity. The efficacy and effectiveness of the present method are supported through an extensive case study with the railway Nam O bridge. It delivers highly accurate results in assessing damage localization and damage severity for single as well as multiple damage scenarios. In addition, the robustness of this method is tested with the presence of white noise reflecting unavoidable uncertainties in signal processing and modeling in reality. The proposed approach is able to provide stable results with data corrupted by noise up to 10%.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.209-218
• /
• 2005

In this paper, we present an Active Optical Network(AON) . The AON uses the Dense Wavelength Division Multiplexing(DWDM) from optical communication access network of ring type, and will be able to provide the smoothly service in the Bandwidth on Demand by using DWDM. It supports the connection of the multiple wavelength and the Sub-Carrier from the optical gigabit ethernet switch. The Wavelength Add Drop Multiplexer(WADM) extracts a specific wavelength, and composes a node of the ring network. The specific wavelength becomes demultiplexing in the Sub-Carrier and it is distributed in the user The active connection of optical gigabit ethernet switch where the distribution of access network is started and access terminal connection equipment is possible. By the BoD from the AON it compares the buffer size which changes, and it analyzes. Also the Time delay of bit compares with the throughput of server The limit of amount of time is decided. Consequently it will be able to realize the dynamic use protocol and an efficient algorithm of the network.

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.281-294
• /
• 2015

Bolted joint connection is the most commonly used connection element in structures and devices. The loosening due to external dynamic loads cannot be observed and measured easily and may cause catastrophic loss especially in an extreme requirement and/or environment. In this paper, an innovative Real-time Cross-Correlation Method (RCCM) for monitoring of the bolted joint loosening was proposed. We apply time reversal process on stress wave propagation to obtain correlation signal. The correlation signal's peak amplitude represents the cross-correlation between the loosening state and the baseline working state; therefore, it can detect the state of loosening. Since the bolt states are uncorrelated with noise, the peak amplitude will not be affected by noise and disturbance while it increases SNR level and increases the measured signals' reliability. The correlation process is carried out online through physical wave propagation without any other post offline complicated analyses and calculations. We implemented the proposed RCCM on a single bolt/nut joint experimental device to quantitatively detect the loosening states successfully. After that we implemented the proposed method on a real large structure (reaction wall) with multiple bolted joint connections. Loosening indexes were built for both experiments to indicate the loosening states. Finally, we demonstrated the proposed method's great anti-noise and/or disturbance ability. In the instrumentation, we simply mounted Lead Zirconium Titanate (PZT) patches on the device/structure surface without any modifications of the bolted connection. The low-cost PZTs used as actuators and sensors for active sensing are easily extended to a sensing network for large scale bolted joint network monitoring.