• 전자공학회논문지 IE
• /
• v.47 no.3
• /
• pp.35-40
• /
• 2010

In this paper, we propose an algorithm to improve the precision of initial carrier-frequency offset estimation for multiband-OFDM (MB-OFDM) UWB system which is considering the quantization-noise effect. In the general OFDM system, the two adjacent and repeated preamble symbols are used for the initial carrier-frequency synchronization while the performance of the frequency-offset estimation is bounded by quantization effect generated from analog-to-digital conversion at the receiver. This paper proposes a method in which one-symbol interval between two adjacent preamble symbols for the initial frequency synchronization is extended to multiple-symbol interval between non-adjacent symbols in an extent that phase ambiguity does not occur. In this paper, we also present '6' as optimal multiple symbol interval for the MB-OFDM system with 30 preamble symbols on 3-band hopping and with 4-bit A/D conversion at the receiver. Under the channel environments for the MB-OFDM UWB system, the simulation results show that the proposed estimation algorithm can achieve the initial estimation in offset precision less than 5 ppm.

• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.419-427
• /
• 2015

There have been increases in the elderly population worldwide, and this has been accompanied by rapid growth in the health-care market, as there is an ongoing need to monitor the health of individuals. Wireless body area networks (WBANs) consist of wireless sensors attached on or inside the human body to monitor vital health-related problems, e.g., electrocardiograms (ECGs), electroencephalograms (EEGs), and electronystagmograms (ENGs). With WBANs, patients' vital signs are recorded by each sensor and sent to a coordinator. However, because of obstructions by the human body, sensors cannot always send the data to the coordinator, requiring them to transmit at higher power. Therefore, we need to consider the lifetime of the sensors given their required transmit power. In the IEEE 802.15.6 standard, the transmission topology functions as a one-hop star plus one topology. In order to obtain a high throughput, we reduce the transmit power of the sensors and maintain equity for all sensors. We propose the multiple-hop transmission for WBANs based on the IEEE 802.15.6 carrier-sense multiple-access with collision avoidance (CSMA/CA) protocol. We calculate the throughput and variance of the transmit power by performing simulations, and we discuss the results obtained using the proposed theorems.

• Journal of Digital Contents Society
• /
• v.5 no.3
• /
• pp.187-191
• /
• 2004

Rapid time variations of the mobile communication channel have a dramatic effect on the performance of multi-carrier modulation. This paper analyzed the bit error rate (BER) performance for multi-carrier code division multiple access (MC-CDMA) network, and derived the equivalent signal-to-total noise plus interference(SNIR) of MC-CDMA system in the reverse link, the performance of MC-CDMA/BPSK signal is evaluated taking into account the fraction of partial-band interference and interference power. and the effect of partial-band interference is comprehensively studied in order to further improve the Qos of multi-carrier multimedia system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.110-118
• /
• 2009

The PB/MC-CDMA(Partial Block Multi Carrier Code Division Multilple Access) system can improve the performance by reducing the ICI(Inter-Code Interference) between users. Also, this system can achieve the frequency diversity gain by avoiding ISI(Inter Symbol Interference). Therefore, the performance of PB/MC-CDMA system is better than that of conventional MC-CDMA(Multi Carrier Code Division Multiple Access) system. However, similarly to other multi-carrier systems, it still has a PAPR(Peak to Average Power Ratio) issue. In this paper, we propose a peak power reduction technique involving optimized spreading code selection without side information for the PB/MC-CDMA. The PB/MC-CDMA system in each block of units reuses the code so the extra code will be remained. This extra code is divided into several groups to calculate the PAPR and solving the PAPR problem by transferring the selected code which has minimum peak power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.295-302
• /
• 2014

OFDM technique uses multiple sub-carriers for the data transmission. Therefore, inter carrier interference is generated because of nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over Doppler fading channels also causes inter carrier interference. The interference increases the bit error rate in receiver. Sub-carrier allocation methods in LTE and WiMAX standards are different. The performance of OFDM systems using different sub-carrier allocation, gauged by the bit error rate, is analyzed considering the nonlinear high power amplifier, carrier frequency offset and Doppler fading channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.641-655
• /
• 1992

In this paper, the performance of the various multiple accesstechniques for the mobile computer network has been studied in the consideration of the characteristics. Of the mobile communication channel. In the case of the hidden node occurring, it could be seen that the performance of the code division multiple access(CDMA) technique. With simultaneous access function is better than that of the other packet access methods such as carrier sensed multiple access(CAMA). Busy tone mulitiple access(BTMA)and idle signal muitiple access(ISMA) in the view of the throuhtput and mean delay time. Also it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access(CSMA).etc when the fading effect or impulsive noise exists in the mobile channel. Especially in the case of the distributed mobile network. It has been shown that the receiver-transmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3704-3724
• /
• 2018

This paper proposes an advanced turbo receiver with joint inter-carrier interference (ICI) self cancellation and channel equalization for multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems over rapidly time-varying channel environment. The ICI caused by impairment of local oscillators and carrier frequency offset (CFO) is the major problem for MIMO-OFDM communication systems. The existing schemes (conjugate cancellation (CC) and phase rotated conjugate cancellation (PRCC)) that deal with the ICI cancellation and channel equalization can't provide satisfactory performance over time-varying channels. In term of error rate performance and low computational complexity, ICI self cancellation is the best choice. So, this paper proposes a turbo receiver to deal with the problem of joint ICI self cancellation and channel equalization. We employ the adaptive phase rotations in the receiver to effectively track the CFO variations without feeding back the CFO estimate to the transmitter as required in traditional existing scheme. We also give some simulations to verify the proposed scheme. The proposed schene outperforms the existing schemes.

• Speech Sciences
• /
• v.11 no.4
• /
• pp.143-150
• /
• 2004

This study was done to compare thresholds between those of Auditory Brainstem Response (ABR) with clicks or tonebursts and Multiple Auditory Steady-State Response (MASTER). The results would give a promising tool for evaluating frequency-specific hearing sensitivity in infants or young children. The correlation coefficient value between the click ABR thresholds and MASTER thresholds at carrier frequencies, 500, 1,000, 2,000 Hz, and 4,000 Hz was obtained at Pearson 0.91, 0.94, 0.93, and 0.91.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.113-117
• /
• 2008

Wireless carrier sense multiple access (CSMA) systems are widely used but show extremely different transmission efficiency according to the operation environment. Simulation or prototype deployment is needed to see the transmission efficiency of a wireless CSMA system with the partial packet retransmission scheme. The lower bound for the transmission efficiency of such a system is found mathematically in this work. This shows how much the partial packet retransmission scheme improves the transmission efficiency quantitatively. It also shows that the maximum throughput is obtained at higher offered load compared to the conventional CSMA system without the partial packet transmission. The result of this work can be applied to IEEE 802.11 networks or wireless mesh networks.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.450-450
• /
• 2000

This paper presents a software design simulation method for controlling multiple mechanism carrier system (MMCS), which is mainly used in a wrapping machine or a case packing machine. This method uses a mechanical tool-work interactive model proposed in this paper, in order to represent the interactive behaviors between some tools and a work driven by their tools, in which low effect states of a work are defined. Based on this method, a 3-D simulation system has been built. It consists of shape modeling of each device, behavior definitions of tools, and control logic using if-then expression. By applying it to a ase packing machine having about 30 mechanical devices and 100 inputs/outputs for control, the effectiveness of this method has been shown in general verification of control logic specification in an early software design phase and the possibility of smooth communication tool between mechanical and software designers.