• 한국통신학회논문지
• /
• 제35권9A호
• /
• pp.874-881
• /
• 2010

수중 통신에서 사용되는 음향 신호의 감쇠는 노드 사이의 거리는 물론 사용 주파수 대역에도 크게 영향을 받는다. 또한 음향 신호는 긴 전송 지연을 가지므로 복잡한 절차와 많은 제어 메시지를 필요로 하는 매체 접속 기법은 사용하기에 적합하지 않다. 본 논문은 이처럼 열악한 수중 환경에서 코드 분할 다중 접속 기법의 적용 방법을 제시하고 그 성능을 분석한다. 수중 음향 센서망 구조는 데이터 수집형 트리 구조를 가정하며 에너지 절약을 위해 트리 구조에서 계층간 엇갈림 깨어남 패턴을 사용한다. 성능 분석을 위해 다양한 사용 주파수 대역에서 계층별 데이터 전송률을 수학적으로 도출한다.

• Advances in Energy Research
• /
• 제7권2호
• /
• pp.85-100
• /
• 2020

Distributed energy resources (DERs) are essential for coping with growing multiple energy demands. A microgrid (MG) is a small-scale version of the power system which makes possible the integration of DERs as well as achieving maximum demand-side management utilization. Hence, this study focuses on the analysis of optimal power dispatch considering economic aspects in a multi-carrier microgrid (MCMG) with price-responsive loads. This paper proposes a novel time-based demand-side management in order to reshape the load curve, as well as preventing the excessive use of energy in peak hours. In conventional studies, energy consumption is optimized from the perspective of each infrastructure user without considering the interactions. Here, the interaction of energy system infrastructures is considered in the presence of energy storage systems (ESSs), small-scale energy resources (SSERs), and responsive loads. Simulations are performed using GAMS (General Algebraic modeling system) to model MCMG, which are connected to the electricity, natural gas, and district heat networks for supplying multiple energy demands. Results show that the simultaneous operation of various energy carriers, as well as utilization of price-responsive loads, lead to better MCMG performance and decrease operating costs for smart distribution grids. This model is examined on a typical MCMG, and the effectiveness of the proposed model is proven.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.46-53
• /
• 2020

In this paper, the development of a manually and continuously variable impact force control mechanism for hydraulic breakers was studied. Generally, a hydraulic breaker has one or two piston strokes. Hydraulic breakers, which have two strokes, have two valve-switching ports and make short and long piston strokes. The piston stroke valve controls the piston stroke by opening and closing a short stroke-switching port. The short piston stroke mode is used to break soft rock, concrete, or asphalt. This stroke control valve system is not popular for small hydraulic breakers mounted on 1 to 14-ton excavators. To preserve the carrier-like excavator, proper breaking force is needed, and it can be easily controlled by multiple piston stroke control valves. The easiest way to control these breakers is to use several switching ports and valves but they are not easy to install in small hydraulic breakers and are expensive. To use only one switching port and valve, a method can be used to change the open area of the switching port to delay valve switching. This method provides multiple piston strokes.

• 한국전자파학회논문지
• /
• 제18권3호
• /
• pp.248-256
• /
• 2007

본 논문에서는 OFDMA(Orthogonal Frequency Division Multiple Access) 상향 링크 시스템에서 발생하는 높은 PAPR(Peak to Average Power Ratio) 문제를 해결하기 위한 방법으로 선택적 DFT(Discrete Fourier Transform) spreading 기법을 새롭게 제안한다. 제안된 방법은 기존의 DFT spreading 기법에 선택적 특성을 추가한 것으로, SLM(Selective Mapping) 기법과 DFT spreading 기법이 혼합된 형태를 갖는다. 그러나 제안된 기법은 copy branch를 사용함에 있어 그 복잡도의 증가를 최소화하기 위해 하나의 DFT만을 사용하고, DFT출력 신호에 여러 개의 각기 다른 matrix를 곱함으로써 여러 개의 copy branch를 생성한다. 여기서 사용된 matrix는 DFT 앞에서의 입력 데이터 위상 회전을 선형 변환함으로써 얻어진 것으로, 각각의 matrix는 그 복잡도가 하나의 DFT보다 매우 낮게 설계된다. 성능 분석을 위해 QPSK 변조 및 512 point IFFT의 사용을 가정하고 한 사용자에게 할당된 sub-carrier 수는 각각 75, 100인 두 가지 경우를 고려하였다. 성능 분석 결과에서, 제안된 선택적 DFT spreading 기법은 copy branch 수가 4일 때 약 5.2 dB 이상의 PAPR 저감 효과를 가지며, 이는 기존의 DFT spreading만을 사용하는 경우 보다 약 1.8 dB 이상, 그리고 32 copy branch를 사용하는 SLM보다도 약 0.95 dB 이상의 뛰어난 PAPR 저감 성능이다. 또한 복잡도의 비교에서도 사용자에게 할당된 sub-carrier의 수가 100일 때, 제안된 기법은 기존의 DFT spreading 기법 보다는 증가되었으나 제안된 기법의 성능에 가장 근접하는 32 copy branch의 SLM보다 약 91.79 % 저감된 곱셈 량을 갖는다. 제안된 기법의 효율성을 확인할 수 있으며, 사용자에게 할당된 sub-carrier의 수가 증가되어 단일 사용자가 모든 sub-carrier를 사용하는 경우, 즉 일반적인 OFDM과 같은 상황에서도 유사한 성능적 이득을 예상할 수 있다.

• ETRI Journal
• /
• 제25권1호
• /
• pp.9-18
• /
• 2003

We mathematically analyze the passband vestigial sideband (VSB) system for the Advanced Television Systems Committee (ATSC) digital television standard and present a baseband-equivalent VSB model. The obtained baseband VSB model is represented by convolution of the transmission signal (before modulation) and the baseband equivalent of the complex VSB channel. Due to the operation of the physical channel as an RF passband and the asymmetrical property of VSB modulation, it is necessary to use a complex model. However, the passband channel may be reduced to an equivalent baseband. We show how to apply standard channel model information such as delay, gain, and phase for multiple signal paths to compute both the channel frequency response with a given carrier frequency and the resulting demodulated impulse response. Simulation results illustrate that the baseband VSB model is equivalent to the passband VSB model.

• ETRI Journal
• /
• 제42권1호
• /
• pp.36-45
• /
• 2020

A priority-based data communication approach, developed by employing cognitive radio capacity for sensor nodes in a wireless terrestrial sensor network (TSN), has been proposed. Data sensed by a sensor node-an unlicensed user-were prioritized, taking sensed data importance into account. For data of equal priority, a first come first serve algorithm was used. Non-preemptive priority scheduling was adopted, in order not to interrupt any ongoing transmissions. Licensed users used a nonpersistent, slotted, carrier sense multiple access (CSMA) technique, while unlicensed sensor nodes used a nonpersistent CSMA technique for lossless data transmission, in an energy-restricted, TSN environment. Depending on the analytical model, the proposed wireless TSN environment was simulated using Riverbed software, and to analyze sensor network performance, delay, energy, and throughput parameters were examined. Evaluating the proposed approach showed that the average delay for sensed, high priority data was significantly reduced, indicating that maximum throughput had been achieved using wireless sensor nodes with cognitive radio capacity.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.69-78
• /
• 1999

The attitude determination system is indispensable for navigation, guidance and control tasks. In order to construct this system some special products that use dual frequencies or have on receiver engine with multiple antennas are used. But they are so expensive. Thus there are still strong requirements for the conventional low cost single frequency off-the-shelf receiver. This paper will propose a new technique to resolve integer ambiguity with single frequency GPS receiver and will show the problems of the attitude applications in which low cost receiver are being used. Also, based on this new technique precise attitude determination is presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.37-40
• /
• 2000

As the number of CDMA subscribers increases, CDMA systems utilize more than one CDMA carrier In order to accommodate Increasing capacity requirement. In this paper, we present a new analytical method for evaluating the Erlang capacity of CDMA systems with multiple CDMA carriers. in the case of the algorithm proposed in 〔5〕, the calculation complexity for evaluating the call blocking probability Is increased proportionally to the sixth power of the number of used CDMA carriers when the CDMA system supports voice and data services. Consequently, It is Impractical to calculate Erlang capacity with the algorithm of 〔5〕especially when the number of used CDMA carriers is larger than 3. To resolve this problem, we propose a new analytical method for evaluating the Erlang capacity. The calculation complexity of the proposed method for evaluating call blocking probability is increased just proportionally to the second power of the number of used CDMA carriers when the CDMA systems support voice and data services.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.77-80
• /
• 2005

In this paper, we introduce the efficient carrier phase estimating algorithm collaborate with the channel decoder of turbo coded QPSK modulation for mobile DVB-RCS systems. At low SNR, the phase estimation using soft information of turbo decoder is able to improve power efficiency because of achieving the good synchronization. We investigate performance of external single estimator and internal multiple estimator in the PSP (Per Survivor Processing) manner over AWGN channel. For phase estimation, the LMS (Least Mean Square) scheme is considered. Three different APP-based methods are also proposed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1109-1112
• /
• 1998

In this paper, we propose a new architecture of the PN code acquistion system which has some shared blocks in order to reduce the hardware complexity. The proposed system has an energy calculation block which is shared by two active correlators. Our system is designed suitable for IS-95 based CDMA PCS. The new architecture was designed and simulated using VHDL. Also, We implemented it with Altera FPGA, and verified our system. The gate count is about 7,500. Our proposed architecture is also useful for multi-carrier system which uses the multiple searcher.