• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.45-53
• /
• 2000

In wireless environment, due to the limited capacity of radio channels it is not easy to guarantee QoS provisioning to mobile users. Therefore, one of the key problems to support broadband multimedia multi-services in wireless ATM networks is to study an effective call admission control(CAC). The purpose of this paper is to propose a distributed CAC scheme that guarantees multi QoS and multi-class service. Control parameters of the proposed scheme are QoS threshold and channel overload probability. With these parameter control, we show that the scheme can guarantee the requested QoS to both new and handover calls. In the scheme, channels are allocated dynamically, and QoS measurements are made in a distributed manner. We show that by providing variable data rate to calls it can effectively prohibit the QoS degradation even if there are severe fluctuations of network traffic. We compare the proposed CAC scheme to the well-known schemes such as guard band call admission control scheme. Through numerical examples and simulations, the proposed scheme is shown to improve the performance by lowering the probability of handover call dropping

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.461-467
• /
• 2003

This paper proposes the method of mobility implementation for location searching in the intelligence wireless ATM networks that expand and apply standard broadband signaling capabilities, and analyze the performance based on the numerical algorithm. The existing B-ISDN UNI protocol stack demands the location search mechanism to determine the location of mobile terminal in the wireless ATM networks because it use single protocol through the fixed PTP interface or PTM interface that don't support terminal mobility. The proposed method make possible the dynamic mobility at a part of wireless access by minimizing the signaling load without a falling-off in system performance by using the intelligence network technology according to the expansion of ATM and B-ISDN signaling integration based on the fixed networks. We implemented the performance analysis by MFC modeling based on numerical algorithm, and realized the efficiency of expenses by carrying out the comparative signaling performance evaluation to measure the relative gains of location search service in the intelligence wireless ATM system. The obtained results have the flexibility to operate in the public B-ISDN network environment without a change of existing B-ISDN/ATM NNI signaling reference to support the wireless ATM access system, and can easily expand to correspond to terminal mobility and various multimedia services in the next broadband PCS.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.123-132
• /
• 1999

A video conferencing system provides sharing the conference environment for geographically dispersed computer users who use the audio and video information. But the conventional video conferencing systems have some problems which are dependent on specific software and/or hardware and bound the certain platform and network environment. Furthermore the participants must know the information about other participants before joining the conference session and they have to use the same video conferencing system. This paper describes design and implementation of the video conferencing system on the WWW to solve the mentioned problems. The conference applications are transmitted from a WWW server and executed in the participants Web browsers. The participant can carry out conference services by using only the web browser. The WWW server takes charge of conferencing management including the information related to the participants and provides supported conference tools such as whiteboard, chatting and multimedia controls. Therefore the participants can easily join the conference sessions and perform conference working regardless of network connection situations. We used the Java to implement the seamless session connections and interaction between the conference participants which are the most important when implementing the video conferencing system on the WWW and used the ActiveX technology about the audio and video controls to make it easy the hardware control.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.572-588
• /
• 2013

In this paper, 4K-UHDTV or 8K-UHDTV and UHD-3DTV that the next generation broadcasting implementation and the possibility of direct receiving environment construction is analyzed on the terrestrial broadcasting. Particularly, we investigated the possibility by analyzing the previous and related works with regard to UHDTV transmission by DVB-T2 that is one of the best commercialized transmission mode. In order that the UHDTV broadcasting succeeds once again after completion of digital terrestrial switch over at the end of 2012, the ultra high resolution image transfer is important. However, the direct, the indoor and ubiquitous receiving environment is important in not only TV but also the personal type multimedia terminal in the sense of UHDTV service penetration. Therefore, in this paper, by using SFN and high error-correcting mode in DVB-T2 standard, the efficient frequency utilization and effective reception environment construction is illustrated. Particularly, SFN network constitution by 2 mutually different frequencies including the VHF bandwidth and UHF band, and etc. is shown. And the method that builds the free wireless receive environment by using SFN low power radio repeater and for home use gap filler is proposed. And the effect and frequency amount required are presented, when UHDTV broadcasting use 10MHz bandwidth.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.107-115
• /
• 2013

Smart appliances with multi-media and telecommunication equipments provide users complicated convenience functions. On the contrary, 8-bit controller-based low performance electronics still cannot afford such multimedia and telecommunication. If we find a way to have low-end electronics connected and provide complicated functions, they can be also made "smart". Fortunately, 8-bit controllers used in low-end appliances have UART, which can be connected to any of BlueTooth, Wi-Fi and ZigBee communication modules which can, in turn, communicate with smart devices. Any communication module can be attached to the low-end electronics due to the variety of smart devices' connectivity at the other side. Although the convenience functions seem complicated, they are actually macros in a script form composed of micro commands which implement the base functions of appliances. Since the kinds of the base functions are not that many, the low-end electronic appliances will become "smart" if their control program can be extended to execute sequentially the micro commands in any combination. Such simple innovation has not seen the world, until now due to the overhead of the additionally required hardware such as display devices and buttons. The high-quality display and touch screen functionalities of smart devices can replace the required hardware, and remove the overhead completely. In fact, the low-end appliances become smart as if an "evolution kit" is newly equipped.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.609-619
• /
• 2020

In accordance with a demand for high quality video streaming, it needs high data rate in limited bandwidth and more traffic congestion occurs. In particular, when providing real time video service, packet loss rate and bit error probability increase significantly. To solve these problems, a raptor code, which is one of FEC(Forward Error Correction) techniques, is pervasively used in the application layers as a method for improving real-time service quality. In this paper, we propose a method of determining image transmission parameters based on various deep neural networks to increase transmission efficiency at a similar level of image quality by using raptor codes. The proposed neural network uses the packet loss rate, video encoding rate and data rate as inputs, and outputs raptor FEC parameters and packet sizes. The results of the proposed method present that the throughput is 1.2% higher than that of the existing multimedia transmission technique by optimizing the transmission efficiency at a PSNR(Peak Signal-to-Noise Ratio) level similar to that of the existing technique.

• Journal of Engineering Education Research
• /
• v.6 no.1
• /
• pp.22-31
• /
• 2003

The purpose of this study was to develop CD-ROM so that students can understand 8051 Microprocessor unit easily in electronics circuit practice subject of technical high school. The study gives students, who have difficulties in learning, a chance for self-directed and supplementary learning by suggesting interface process with 8051 Practice Kit. To achieve these purposes, literature survey, collecting textbooks and materials, development of CD-ROM were gradually carried out. Each steps were as follows: Firstly, in literature survey, concepts and characteristics of multimedia and application to class were reviewed. Secondly, text contents on 8051 Microprocessor unit were analyzed, main contents were extracted and graphic, sound, animation were made. It was consisted of eight basic learning subjects, and designed to flow systematically. In this study, we presented a kind of teaching-learning material by developing CD-ROM in 8051 microprocessor unit in electronics circuit practice subject as a central matter. This material will be able to help technical high school students in learning

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.248-264
• /
• 2010

In this paper, we presents an efficient rich media framework based on MPEG-4 LASeR PMSI. Rich media provides distinctive features such as dynamic updates and object-based interactivity over the conventional AV centric media service. It rapidly gains its popularity as the convergent multimedia services between broadcasting and telecommunication. MPEG-4 LASeR is an international standard which provides specifications for such rich media services. Recently MPEG added an extension to LASeR called PMSI. It provides an efficient technique to present SI on a scene by referencing specific portions of SI from PI. The presented rich media application is using PMSI of MPEG-4 LASeR standard to provide users a widget-like rich media application. This application utilizes MPEG-4 LASeR with PMSI technique as PI, and this PI references SI to present information that resides in SI on a scene. In this paper, we provide descriptions of technical ingredients used to build the presented application. The framework is presented followed by the implementation result. Possible impacts and applicable services are described in the conclusion.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.7
• /
• pp.39-49
• /
• 2012

Demand for high resolution video services leads to active studies on high speed video processing. Especially, widespread deployment of multi-core systems accelerates researches on high resolution video processing based on parallelization of multimedia software. Previously proposed parallelization approach could improve the decoding performance. However, some parallelization methods did not consider the entropy decoding and others considered only a partial decoding parallelization. Therefore, we consider parallel entropy decoding integrated with other parallel video decoding process on a multi-core system. We propose a novel parallel decoding method called Integrated Parallelization. We propose a method on how to optimize the parallelization of video decoding when we have a multi-core system with many cores. We parallelized the KTA 2.7 decoder with the proposed technique on an Intel i7 Quad-Core platform with Intel Hyper-Threading technology and multi-threads scheduling. We achieved up to 70% performance improvement using IP method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.150-164
• /
• 2013

Currently it is being gradually focused on the mobile application's processing performance implemented by Javascript and HTML (Hyper Text Markup Language) due to the dissemination of mobile web application supply based on the WAC (Wholesale Application Community). If the application software has a simple functional processing structure, then the problem is benign, however, the load of a browser is getting heavier as the amount of Javascript processing is being increased. There is a limitation on the processing time and capacity of the Javascript in the ordinary mobile browsers which are on the market now. In order to solve those problems, the Web Worker that is not supported from the existing Javascript technology is now provided by the HTML 5 to implement the multi thread. The Web Worker provides a mechanism that process a part from the single thread through a separate one. However, it can not guarantee the computing ability as a native application on the mobile and is not enough as a solution for improving the fundamental processing speed. The Cyclostorm overcomes the limitation of resources as a mobile client and guarantees the performance as a native application by providing high computing service and ascripting the Javascript process on the mobile to the computer server on the cloud. From the performance evaluation experiment, the Cyclostorm shows a maximally 6 times faster computing speed than in the existing mobile browser's Javascript and 3 to 6 times faster than in Web Worker of the HTML 5. In addition, the usage of memory is measured less than the existing method since the server's memory has been used. In this paper, the Cyclostorm is introduced as one of the mobile cloud computing services to conquer the limitation of the WAC based mobile browsers and to improve the existing web application's performances.