• 상하수도학회지
• /
• 제12권4호
• /
• pp.33-42
• /
• 1998

The optimum design and preliminary cost estimations of air stripping towers ASTs with granular activated carbon adsorption (GAC) systems as the off-gas treatment were done and compared to liquid-phase GAC system. The optimum design and preliminary cost estimations were done for either single or multicomponent systems. A computer program was developed for this study. 15 single compounds and their multicomponent systems were studies. Even with off-gas treatment, AST was generally a less expensive process for treatment of volatile organics than liquid-phase GAC system. Treatment costs of small systems were sensitive to system capacity. Accumulative effect of treatment costs was found in multicomponent systems. The cost of a multicomponent system was highly dependent on the least strippable component in ASTs even with gas-phase GAC or the least adsorbable component in liquid-phase GAC system.

• Journal of Applied Biological Chemistry
• /
• 제48권2호
• /
• pp.105-107
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3559-3564
• /
• 2012

An efficient one-pot synthesis of ${\beta}$-acetamido ketones was accomplished by AgOTf-catalyzed multicomponent reactions of substituted acetophenones with aromatic aldehydes and acid chloride in acetonitrile in high yields. The methods offer several significant advantages of easy handling, mild reaction conditions, and use of effective and non-toxic catalyst.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.27-32
• /
• 2002

In this study, estimate of Mechanical Properties depending on Injected direction in Polymer for Automobile Application. The used materials is polyamid(nylon6), polypropylene(PP) of a simple component and its mixed, reinforced glass fiber(15%) in polyamid. One side direction of a simple component is highest strength and the two sides direction of multicomponent appear lowest strength. This is caused by effects of weldline, imperfect fusion and impregnation of multicomponent. To improve mechanical properties, it is necessary to minimize of weldline, compatibility, perfect fusion and impregnation in multicomponent polymer.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권7호
• /
• pp.399-406
• /
• 2000

We propose an nonlinear demodulation algorithm for undersampled multicomponent AM(Amplitude Modulation), FM(Frequency Modulation) and AM-FM signals. First, we derive respectively undersampling frequency of the AM, FM and AM-FM using undersampling scheme, and separate respectively monocomponent signals from multicomponent signals using periodic algebraic separation algorithm. In this case augmented separation matrix is very regular and sparse, it has a special structure. The proposed demodulation algorithm detects respectively message signals of the IA(Instantaneous Amplitude) and IF(Instantaneous Frequency) from descrete monocomponent AM, FM and AM-FM signals with an undersampling frequency to be controllable. Verifying the RMS(Root Mean Squares) errors of the detected signals, we show that the performance is excellent.

• Bulletin of the Korean Chemical Society
• /
• 제22권1호
• /
• pp.117-119
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• 제17권7호
• /
• pp.648-653
• /
• 1996

We have shown several examples of characterization of multicomponent polymer systems by size exclusion chromatography coupled with a light scattering detector. Although SEC cannot provide a complete information for such systems due to its intrinsic limitation, one can extend its capability by combining multiple detection in order to get relevant information to some extent.

• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.22-30
• /
• 2015

지금까지의 분리막 공정 모델링에 대한 연구는 주로 2성분계 원료의 분리공정에 집중되어 왔다. 실제 운전에 있어서는 2성분계 혼합물은 매우 드물며 다성분계 혼합물이 대부분이므로 막분리 공정의 설계를 위해서는 다성분계 막분리 공정에 대한 모델개발이 필수적이다. 본 연구에서는 중공사막을 이용하는 분리막 공정에서 다성분 혼합물 원료에 대한 분리공정 모델링을 수행하였다. 다양한 형태의 다성분 공정모델을 구현하였으며 실험결과를 이용하여 모델의 정확도 및 신뢰도를 조사하였다. 개발된 모델들은 원료 흐름의 유입조건과 다양한 운전조건에 대하여 안정적이고 실험 데이터에 근접한 모사결과를 보여 주었다.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.426-434
• /
• 2000

This paper deals with a generalized similarity solution for the one-dimensional solidification of ternary or higher-order multicomponent alloys. The present approach not only retains the existing features of binary systems such as temperature- solute coupling, shrinkage-induced flow, solid-liquid property differences, and finite back diffusion, but also is capable of handling a multicomponent alloy without restrictions on the partition coefficient and microsegregation parameter. For an alloy of N-solute species, governing equations in the mushy region reduce to (N+2) nonlinear ordinary differential equations via similarity transformation, which are to be solved along with the closed-form solutions for the solid and liquid regions. A linearized correction scheme adopted in the solution procedure facilitates to determine the solidus and liquidus positions stably. The result for a sample ternary alloy agrees excellently with the numerical prediction as well as the reported similarity solution. Additional calculations are also presented to show the utility of this study. Finally, it is concluded that the present analysis includes the previous analytical approaches as subsets.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.670-677
• /
• 1999

An analysis of generation and growth of multicomponent particles has been carried out to predict the size and composition distributions of particles generated in the Modified Chemical Vapor Deposition(MCVD) process. In MCVD process. scale-up of sintering and micro-control of refractive index may need the Information about the size and composition distributions of $SiO_2-GeO_2$ particles that are generated and deposited. The present work solved coupled steady equations (axi-symmetric two dimensions) for mass conservation, momentum balance. energy and species(such as $SiCl_4$, $GeCl_4$, $O_2$, $Cl_2$) conservations describing fluid flow. heat and mass transfer in a tube. Sectional method has been applied to obtain multi-modal distributions of multicomponent aerosols which vary in both radial and axial directions. Chemical reactions of $SiCl_4$ and $GeCl_4$ were included and the effects of variable properties have also been considered.