• 소성∙가공
• /
• 제14권3호
• /
• pp.200-206
• /
• 2005

In general, a lot of small electrode is needed for making precision injection molds, such as cell phone mold and precision connector mold, because of the limitations of NC milling process. Those small electrodes usually have very simple shapes and the actual cutting time is so short, but many NC programs and set-up process, a very complicated and time consuming Job, are needed for each electrode. This paper deals the method for increasing the productivity of machining electrodes. In this work, the process standardization of machining electrode was done and special jig fer machining small electrodes was developed. Automatic tool path optimization software was also developed to minimize tool changing time. In addition, in-line cutting tool measuring system was adopted. The productivity of machining for small electrode has been increased up to $100\%$.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.16-22
• /
• 2009

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.25-33
• /
• 2003

A burr has been defined as undesirable projection of material formed as a result of plastic flow from a cutting or shearing operation. It is unavoidable in all kinds of machining operation. As a result, burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. In this study, the primary interest is about exit burr. The burr formation mechanism in each type of burr is classified. Data bases are developed to predict burr formation result. In the milling operation, we develop an algorithm to analyze the burr formation mechanism by the geometrical analysis on the multi featured workpiece with multi cutting path. The algorithm includes three steps, i. e., the feature identification, the cutting condition identification, and the analysis on exit burr formation. We can predict which portion of workpiece would have the exit burr in advance so that we can manage to find a way to minimize the exit burr formation in an actual cutting. Also, this algorithm can be implemented in a commercial CAM package so that we can simulate the NC code to review the burr formation in advance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1016-1020
• /
• 2001

The spinning is a very effective manufacturing technology for short production runs in a variety of sizes and shapes, because it can form the cross-section or tubular parts various shapes. However extensive experimental and analytical research has not been carried out. In this study, and fundamental experiment was conducted to improve productivity with process parameter such as tool path, angle of roller holder(a), feed rate(v) and corner radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to have and effect on spring back. The clearance was controlled in order to achieve the precision product which is comparable to deep drawing one. And also thickness and diameter distribution of a multistage cup obtained by shear spinning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• 대한산업공학회지
• /
• 제17권1호
• /
• pp.37-49
• /
• 1991

This report describes an integrated approach to sculptured surface design and manufacture, and a software package for it on a multi-axis NC milling machine. The integrated software consists of four parts : (1) surface fitting procedure for generating the characteristic polyhedron from 3 dimensional CMM data, (2) surface description for generating the mathematical representation of sculptured surfaces. (3) tool path generation for approximating the surface representation into a sequence of linear cutter paths, and (4) tool control for generating the corresponding joint variable values. This integrated approach is generally applicable to sculptured surface manufacturing where multi-axis milling machines are necessary to produce smooth three-dimensional surfaces.

• Journal of Computational Design and Engineering
• /
• 제3권2호
• /
• pp.151-160
• /
• 2016

Cutter-workpiece engagement (CWE) is the instantaneous contact geometry between the cutter and the in-process workpiece during machining. It plays an important role in machining process simulation and directly affects the calculation of the predicted cutting forces and torques. The difficulty and challenge of CWE determination come from the complexity due to the changing geometry of in-process workpiece and the curved tool path of cutter movement, especially for multi-axis milling. This paper presents a new method to determine the CWE for general milling processes. To fulfill the requirement of generality, which means for any cutter type, any in-process workpiece shape, and any tool path even with self-intersections, all the associated geometries are to be modeled as triangle meshes. The involved triangle-to-triangle intersection calculations are carried out by an effective method in order to realize the multiple subtraction Boolean operations between the tool and the workpiece mesh models and to determine the CWE. The presented method has been validated by a series of case studies of increasing machining complexity to demonstrate its applicability to general milling processes.

• 정보처리학회논문지D
• /
• 제15D권1호
• /
• pp.99-106
• /
• 2008

최신의 컴파일러는 실행 속도를 높이기 위해서 최적화 작업을 수행한다. 그러나 최적화 작업 중에 프로그램 구문의 실행 순서가 바뀔 수 있다. 단일 스레드 소프트웨어 에서는 최적화가 실행 결과에 영향을 주지 않지만 멀티 스레드 소프트웨어에서는 최적화로 인해서 기존의 실행 과정을 계산하는 방법으로는 설명할 수 없는 실행 결과가 발생할 수 있다. 이 문제점을 해결하기 위해서 자바 메모리 모델이 제안되었다. 자바 메모리 모델은 구문의 재배치를 고려하여 멀티 스레드 소프트웨어의 가능한 실행 과정을 명세하고 있다. 현재 자바 메모리 모델은 자바의 표준 메모리 모델로 정의되어 있다. 하지만 대부분의 멀티스레드 소프트웨어 검증 도구는 자바 표준 메모리 모델인 자바 메모리 모델 대신에 순차 일관성메모리 모델만을 고려하고 있다. 순차 일관성 메모리모델에서는 구문의 재배치를 고려하지 않는다. 본 논문에서는 자바 메모리 모델을 이용한 소프트웨어 모델 체킹 기법을 설명한다. 이를 이용하여 기존 소프트웨어 검증 도구인 JavaPathFinder 에서 오류가 없다고 한 소프트웨어의 오류를 찾아내었다.

• Spatial Information Research
• /
• 제11권3호
• /
• pp.275-289
• /
• 2003

시스템은 관광정보를 효과적으로 제공하여, 관광자의 관광만족도를 향상시키는 것을 목적으로 한다. 본 연구에서는 지리정보시스템을 이용하여 개별 관광자들의 여행계획 수립을 돕는 관광안내 시스템을 개발하였다. 관광노선을 네트워크로 검색하고 분석하는 관광노선 안내 시스템을 개발하였다. 다수의 경유지를 최소 거리시간에 방문할 수 있는 TSP (Traveling salesman problem)을 네트워크 분석에 적용하였고, ArcGIS 8.3의 ArcObject 환경에서 시스템을 개발하였다. 개발된 시스템을 제주시의 자료에 적용하여 그 효용성을 평가하였다. 본 연구에서 개발한 관광노선 안내 시스템은 다음과 같은 점에서 의미가 있다. 첫째, 개발된 시스템은 제한된 시간 내에 무엇을 볼 것인가 라는 관광지 선택문제를 해결해준다. 둘째, 효율적 시간관리와 일정관리에 도움을 준다. 셋째, 낯선 장소에서의 활동에 대한 불안감을 낮추어 심리적 안정을 도모한다. 넷째, 그래픽적 표현 익숙한 관광자들에게 공간정보를 효과적으로 습득할 수 있도록 돕는다.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.64-71
• /
• 2004

The growing need for higher precision and productivity in manufacturing industry has lead to an increased interest in computer numerical control (CNC) systems. It is well known fact that the cross-coupling controller (CCC) is an effective method for contouring applications. In this paper, a multi-axis contour error controller (CEC) based on a contour error vector using parametric curve interpolator is introduced. The contour error vector is a vector from the actual tool position to the nearest point on the desired path. The contour error vector is the closest error model to the contour error. The simulation results show that the CEC is more accurate than the conventional CCC for a biaxial motion system. In addition, the experimental results on 3-axis motion system show that the CEC is simply applied to 3-axis motions and contouring accuracy is significantly improved.

• Spatial Information Research
• /
• 제19권1호
• /
• pp.83-91
• /
• 2011

The route finding analysis is an essential geo-related decision support tool in a LBS(Location based Services) and previous researches related to route guidance have been mainly focused on route guidances for vehicles. However, due to the recent spread of personal computing devices such as PDA, PMP and smart phone, route guidance for pedestrians have been increasingly in demand. The pedestrian route guidance is different from vehicle route guidance because pedestrians are affected more surrounding environment than vehicles. Therefore, pedestrian path finding needs considerations of factors affecting walking. This paper aimed to extract factors affecting walking and charting the factors for application factors affecting walking to pedestrian path finding. In this paper, we found various factors about environment of road for pedestrian and extract the factors affecting walking. Factors affecting walking consist of 4 categories traffic, sidewalk, network, safety facility. We calculated weights about each factor using analytic hierarchy process (AHP). Based on weights we calculated scores about each factor's attribute. The weight is maximum score of factor. These scores of factor are used to optimal pedestrian path finding as path finding cost with distance, accessibility.