• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.4
• /
• pp.16-24
• /
• 2002

This work describes a 10b 120 MSample/s CMOS pipelined A/D converter(ADC) based on a merged-capacitor switching(MCS) technique for high signal processing speed and high resolution. The proposed ADC adopts a typical multi-step pipelined architecture to optimize sampling rate, resolution, and chip area, and employs a MCS technique which improves sampling rate and resolution reducing the number of unit capacitor used in the multiplying digital-to-analog converter (MDAC). The proposed ADC is designed and implemented in a 0.25 um double-poly five-metal n-well CMOS technology. The measured differential and integral nonlinearities are within ${\pm}$0.40 LSB and ${\pm}$0.48 LSB, respectively. The prototype silicon exhibits the signal-to-noise-and-distortion ratio(SNDR) of 58 dB and 53 dB at 100 MSample/s and 120 MSample/s, respectively. The ADC maintains SNDR over 54 dB and the spurious-free dynamic range(SFDR) over 68 dB for input frequencies up to the Nyquist frequency at 100 MSample/s. The active chip area is 3.6 $mm^2$(＝ 1.8 mm ${\times}$ 2.0 mm) and the chip consumes 208 mW at 120 MSample/s.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.133-137
• /
• 2018

Arduino is a small microcomputer that is used in a variety of industry fields and especially is widely used as an open source hardware IoT device. The multi-tasking method of Arduino is divided into super loop timing and RTOS thread method. The super loop timing method is simple and easy to understand. However, when one task is long, it affects the execution of the next task. In addition, RTOS threading has the advantage of being able to run without being influenced by other work time. However, Arduino, a small microcomputer, has a disadvantage in that, when the number of threads increases, the context switching time of the thread causes additional time not included in the super loop timing method have. In this paper, we use Arduino Uno R3 and FreeRTOS to analyze these different features, and the task for the experiment is to send 8000 digital signals to the built-in LED port. If two tasks of the same size are executed, the super loop method executes 3 ms faster than FreeRTOS multitasking. If multiple tasks are executed simultaneously, superloop type task is sequential execution and difference in execution time between first task and last task is large. FreeRTOS method can be executed concurrently, but execution time delay of about 30 ms occurs in context switching time.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.10-23
• /
• 2009

In this paper we propose a novel mobile terminal software architecture supporting energy efficient handover operation in heterogeneous networks. Since the legacy proposals for L3 handover are mostly dependent on IETF Mobile IP which has some problems in movement detection mechanism and no considerations on nested heterogeneous network environment as a result they make serious overload on networks and terminals by performing unnecessary handover in such network environments. The proposed architecture has terminal-oriented network selection and switching architecture where a mobile terminal periodically monitors network status and selects the optimum network, and reduces energy consumption by making L3 handover of Mobile IP to the finally selected network. The network selection method first picks up some candidate networks by considering a terminal speed and power consumption estimation, and determines the final target handover network among the candidates after evaluating multiple factors including QoS required by a terminal, network status, user preference and terminal battery status. Finally we verify the functionality and performance of the energy efficient vertical handover architecture by means of adopting it into a real mobile terminal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.184-190
• /
• 2006

Using COMS which provides multi-beam switching function, the optimal transmission channel environments which provides the high data rate communication are proposed in this paper. Also the link budget for communication transponder of COMSAT is designed. Bsaed on the channel modeling for group delay, non-linear and gain flatness characteristics, the system performances which provide high data rate (HDR) service were analyzed in Ka-band satellite channel. As the transmission data rate is increased, the degradation due to these channel characteristics is severely affect the system performance. To efficiently provide the various service via the same transmission system it is necessary to equlize the primary impairment factors. The optimum operating points of HDR satellite transmission system are implemeted and operated by considering the analyzed results on channel characteristics.

• Clinical and Experimental Reproductive Medicine
• /
• v.43 no.1
• /
• pp.44-50
• /
• 2016

Objective: This study was performed to assess our clinical experience with single-port access (SPA) laparoscopic cystectomy and myomectomy and the surgical outcomes of those procedures at our institution. Methods: The authors evaluated the surgical outcomes of SPA laparoscopic cystectomy in 293 patients and SPA laparoscopic myomectomy in 246 patients. The surgical outcomes comprised operation time, the amount of blood loss during the operation, the change in hemoglobin (before and after the operation), the change in hematocrit (before and after the operation), switching to the multi-port access method, complications, transfusions, and the duration of the postoperative hospital stay. Results: The Pearson correlation coefficient and the Spearman correlation coefficient between the operation time and the amount of blood loss were 0.312 and 0.321 for SPA laparoscopic cystectomy, respectively, and 0.706 and 0.674 for SPA laparoscopic myomectomy, respectively. The drops in hemoglobin and hematocrit were $1.33{\pm}0.78g/dL$ and $4.14%{\pm}2.45%$, respectively, in SPA laparoscopic cystectomy, while the corresponding figures were $1.34{\pm}1.13g/dL$ and $4.17%{\pm}3.24%$ in SPA laparoscopic myomectomy, respectively. Conclusion: This study reported the surgical outcomes of SPA laparoscopic cystectomy and myomectomy and compared them to previously published findings on traditional laparoscopic cystectomy and myomectomy. No significant differences were found in the surgical outcomes between SPA and traditional laparoscopic cystectomy and myomectomy.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.7
• /
• pp.328-336
• /
• 2005

Power quality has become concern both utilities and their customers with wide spread use of electronic and power electronic equipment. The poor quality of electric power causes malfunctions, instabilities and shorter lifetime of the load. In power system operation, power system disturbances such as faults, overvoltage, capacitor switching transients, harmonic distortion and impulses affects power quality. For diagnosing power quality problem, the causes of the disturbances should be understood before appropriate actions can be taken. In this paper we present a new approach to detect, localize, and investigate the feasibility of classifying various types of power quality disturbances. This paper deals with the use of a multi-resolution analysis by a discrete wavelet transform to detect power system disturbances such as interruption, sag, swell, transients, etc. We also proposed do-noising and threshold technique to detect power system disturbances in a noisy environment. To find the better mother wavelet for detecting disturbances, we compared the performance of the disturbance detection with the several mother wavelets such as Daubechies, Symlets, Coiflets and Biorthogonals wavelets. In our analysis, we adopt db4 wavelet as mother wavelet because it shows better results for detecting several disturbances than other mother wavelets. To show the effectiveness of the proposed method, a various case studies are simulated for the example system which is constructed by using PSCAD/EMTDC. From the simulation results. proposed method detects time Points of the start and end time of the disturbances.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1383-1389
• /
• 2013

There were telecommunication noise and malfunctions of the electronic devices occurred over a wide area due to the high harmonic voltage and/or current levels of the Back-to-back converter in the DFIG wind power system even though the magnitude of all harmonics is within the international standards. The triangular carrier signals of the PWM used in the power converter system is related to the telecommunication noise because they are in the range of audible frequencies and amplified by a variety of the standing waves that were excited by harmonic voltage sources in the weak grid system such as a long distance distribution transmission lines. This paper describes the characteristics of the harmonics in the wind turbine-generator, numerical analysis and simulation of the harmonics resonance phenomena in the distribution lines as well as measuring induced voltage of the telecommunication lines in parallel with power lines in order to verify the root cause of the telecommunication noise. These noise problems can occur in a wind turbine power system with a non-linear converter at any time, as well as photovoltaic power system. So, the preliminary review of suitable filter devices and switching frequencies of the PWM have to be required by considering the stability of the controller at the design stage but as part of the measures the effect of the telecommunication cable shields was analyzed by comparing the measured data between multi-conductor with/without shields so as to attenuate the sources of the harmonics voltage induced into the telecommunication lines and to apply the most cost-effective measures in the field.

• Korean System Dynamics Review
• /
• v.16 no.4
• /
• pp.51-81
• /
• 2015

The main purpose of this study is to seek better approach which explains reciprocal causality associated with factors causing social conflict and improving social integration respectively. Throughout this study, there are several important implications how social conflict can be solved in South Korea. In particular, government and policy makers in political sector should create an environment of social integration through political reforms by switching from vertical structure to horizontal structure and by encouraging ordinary people to actively participate in the policy-making processes and political activities. In economic sector, government and stakeholder associated with a certain economic issue should induce a change in the economic environment for social integration, focusing on distribution of wealth and employment stability. In social and cultural sectors, it is necessary to solve social and cultural problems (e.g., generation gap and conflict between the young and the old, multi-ethnic families, and lack of communication) by exploring better ways to establish an altruism and to interact with each other. In psychological sectors, PsyCap(Positive Psychological Capital) will help ordinary people to crate positive thinking and lead to social integration. For instance, political leaders having PsyCap are able to communicate with the people and can help the people to build positive main influencing on social integration. Finally, the improvement of the system is required because the improvement of insufficient system is the basis for reasonable and equitable social integration.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.709-715
• /
• 2010

MCDD performs demultiplexing and demodulation of multi-carrier signals for signal processing schemes such as switching, channel encoding and remodulation in an OBP satellite. During the demultiplexing procedure, several factors such as frequency offset and/or quantization error degrade BER performance. Hence, influences of those factors should be reduced. A influence of the frequency offset can be reduced by inserting guard band between channels, and that of quantization error can be decreased by quantization level control. In case that the data rate of system is not limited, the guard band and the quantization level do not affect each other. In the other case, however, mutual influence between them should be considered. In this paper, we observe the mutual influence when the data rate of the MCDD is limited, and analyze the BER performance.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.2
• /
• pp.68-77
• /
• 2003

The Least-Laxity First(or LLF) scheduling algorithm assigns the highest priority to a task with the least laxity, and has been proved to be optimal for a uni-processor and sub-optimal for a multi-processor. However, this algorithm Is Impractical to implement because laxity tie results in the frequent context switches among tasks. In this paper, a Modified Least-Laxity First on Multiprocessor(or MLLF/MP) scheduling algorithm is proposed to solve this problem, i.e., laxity tie results in the excessive scheduling overheads. The MLLF/MP is based on the LLF, but allows the laxity inversion. MLLF/MP continues executing the current running task as far as other tasks do not miss their deadlines. Consequently, it avoids the frequent context switches. We prove that the MLLF/MP is also sub-optimal in multiprocessor systems. By simulation results, we show that the MLLF/MP has less scheduling overheads than LLF.