• Fashion & Textile Research Journal
• /
• v.15 no.5
• /
• pp.753-762
• /
• 2013

This study identifies meaningful factors that influence relationship switching intention and multi-channel use intention for department store customers. Two types of commitment (affective and calculative commitment) are proposed as mediators between satisfaction and behavioral intention. A web-based survey collected fashion product data from consumers who had a relationship with a department store. A total of 150 responses were analyzed by frequency analysis and reliability analysis, CFA, and SEM analysis with SPSS 18.0 and AMOS 18.0. Department store attributes were composed of four factors (product, salespersons, facilities and place, and price and promotion). Department store satisfaction was specified as a second order latent construct which was reflected in the satisfaction with the four department store attributes. Department store satisfaction had a significant negative influence on calculative commitment and a positive effect on affective commitment. Calculative commitment affected switching intention and affective commitment determined multichannel use intention. This study has implications for retail marketers that target fashion consumers and academics who research consumer behavior in retail settings. The most important result is that the affective commitment and the calculative commitment serve different functions. Department store managers need to make an increased effort to instigate an affective customer commitment in order to reduce switching intention.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.45-53
• /
• 2013

Multi-hop cellular networks (MCNs), which reduce the transmit power, mitigate the inter-cell interference, and improve the system performance, have been widely studied nowadays. The relay selection scheme is a key technique that achieves these advantages, and inappropriate relay selection causes frequent relay switchings, which deteriorates the overall performance. In this study, we analyze the conditions for relay switching in MCNs and obtain the expressions for the relay switching rate and relay activation time. Two mobile-based relay selection schemes are proposed on the basis of this analysis. These schemes select the relay node with the longest relay activation time and minimal relay switching rate through mobility prediction of the mobile node requiring relay and available relay nodes. We compare the system performances via simulation and analyze the impact of various parameters on the system performance. The results show that the two proposed schemes can obtain a lower relay switching rate and longer relay activation time when there is no reduction in the system throughput as compared with the existing schemes.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.106-109
• /
• 2008

Piecewise linear diode models are widely used for large-signal circuit analyses, especially power electronic circuit simulations. When using a piecewise linear diode model for simulation, a switching method to select a proper one among linear models is needed. The conventional switching method keeps the previous ON, OFF state information, and applies different switching conditions according to the state. However, this method has difficulties especially in extending to multi-piecewise linear models. This paper presents a switching method which appropriately divides the v-i plane into regions and select a linear model according to the region where the operating point(the voltage and the current of the diode) belongs. This switching method is easily extended to multi-Piecewise linear models. An example using the tableau analysis and the backward Euler integration is presented for verification.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.916-917
• /
• 2008

In this paper, Switching damage of switches that is used to proposed power conversion system is reduced by soft switching way. dissipation by part resonance and my resonance stress for resonance of resonance circuit are decreased. Is acted by conversion system high effectiveness. Have following characteristic. Design snubber circuit that is used by switch protection in existent hard work rate Topology by resonant circuit for sogt switching, circuit structure was simple and control system is easy. Also, Can generate free output voltage by multi level Tuesday of output that use individuation Power Cell's Phase Shift PWM, and Low-end switching frequency the harmonic is few.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1127-1136
• /
• 2017

This paper proposes a new soft switching dual input converter for renewable energy systems. Multi-input converters are produced by combining discrete converters. These converters reduce the number of circuit elements, cost, volume and weight of the converter and provide a constant output power in different weather conditions. Furthermore, soft switching techniques can be applied to increase efficiency. In this paper, a Zero Voltage Transition (ZVT) dual input boost converter is presented. Only one auxiliary circuit is used to provide the soft switching condition for all of the semiconductor elements. The proposed converter, which is simulated by ORCAD software, is theoretically analyzed. To confirm the validity of the theoretical analysis, a prototype of proposed converter was constructed. Simulation and experimental results confirm the theoretical analysis. An efficiency comparison shows a one percent improvement at nominal loads.

• Korean Journal of Cognitive Science
• /
• v.24 no.1
• /
• pp.71-93
• /
• 2013

Multitasking has become part of our life. Self-interruption and switching to another task become easier and more frequent. According to previous studies, however, most of the task-switching incurs a cognitive cost. This study investigated the benefit from task switching. In Study 1, participants performed two tasks were similar, and negative correlation between the number of task switching and performance were confirmed, this result is similar to previous studies. Study 2 has shown that, made a comparison of two conditions, between possible and impossible conditions in terms of task switching. Depending on switching preference, the result of task performance has differentiated and the emotion that participants had before the task has changed. Depending on participants' switching preference, there were different amount of switching cost. Moreover, for participants who preferred task switching highly than others, task switching occurred more benefit than cost.

• 전기의세계
• /
• v.23 no.4
• /
• pp.53-59
• /
• 1974

This paper investigates the theoretical properties of a logic element called the multithreshold threshold element, which is a generalization of the single-threshold threshold element. The primary partition os a systematic method of obtaining the multi-threshold realization of a switching function by the index numbers. The concept of comparable vertices of the same index numbers introduced in this paper is very promising for testing the multi-threshold partition by the initial condition to be defined by the minterms of the same index numbers.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.490-497
• /
• 2016

The analysis of the switch status of each unit module of a cascaded multi-level inverter reveals that the working condition of the switch of a chopper arm causes unnecessary switching under the conventional unipolar sinusoidal pulse width modulation (SPWM). With an increase in the number of cascaded multilevel inverters, the superposition of unnecessary switching gradually occurs. In this work, we propose an improved SPWM strategy to reduce switching in cascaded multilevel inverters. Specifically, we analyze the switch state of the switch tube of a chopper arm of an H-bridge unit. The redundant switch is then removed, thereby reducing the switching frequency. Unlike the conventional unipolar SPWM technique, the improved SPWM method greatly reduces switching without altering the output quality of inverters. The conventional unipolar SPWM technique and the proposed method are applied to a five-level inverter. Simulation results show the superiority of the proposed strategy. Finally, a prototype is built in the laboratory. Experimental results verify the correctness of the proposed modulation strategy.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.2
• /
• pp.55-59
• /
• 2004

Throughout manufacturing processes, pulse shaping is required for material processing and it is regarded as an important (actor according to the specific characteristics of materials. Therefore, this study suggests a highly appropriate pulse shaping technique using a multi-switching method. This is a pulse superposition method in which one flash lamp can consecutively turn on by the double switching of the discharging system. It is possible to construct a variety of pulse shapes and pulse widths by the consecutive trigger of the silicon-controlled rectifiers (SCR) of a PIC (program integrated circuit) one-chip microprocessor. The use of this technique can provide a number of advantages to people who require suitable pulse shaping for particular applications such as welding, cutting, and drilling.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.3 no.2
• /
• pp.18-23
• /
• 1985

This paper develops a new theory of multi-valued switching functions and presents simplification method of the multi-valued combinational circuits for realizing N-valued arithmetic units. Multi-valued adders based on the theory proposed here is presented. Switching funtions to composite 10-valued arithmetic units with BCD input are described which is taken into account of using together with 2-valued logic systems.