• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.29-41
• /
• 1992

According to the recent increase of demands for multi-function and economics on hydraulic excavator, it is required that excavator should have simple operation, higher and operational efficiency, however the modeling of engine/pump system of excavator is not prescribed by the paper. So, in this paper the modeling of engine/pump system of excavator is suggested by identification method from step response and verified effectiveness of identification system by comparing with experimental results which was conducted using PID controller. To improve the problem of parameter variation and modeling error in the system, sliding mode control was introduced and new switching surface was designed. This control algorithm was applied to a hydraulic excavator by simulation, and its effectiveness was verified, and the results of variable structure system for the excavator system using a output component was compared with that of full state feedback when load disturbances and system paramenter variation exist.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.449-454
• /
• 2006

We present a pressure sensor based on the mechanically induced long-period fiber gratings (LPFG) for detecting the multi-location strain variation. The theoretical analysis is performed using a graphic method for a weakly guiding step-index fiber. The calculated results are in good agreement with the experimental results. In this study, from the fact that the optical parameters of a single-mode fiber slightly differ from manufacturing company to manufacturing company, the multipoint pressure-detection sensor systems composed two identical LPFGs are realized. When the pressure is applied two LPFG sensors at once, the resonance peaks are separated as much as about 40 nm. These types of sensor systems are well suited as a multipoint monitoring of strain or temperature in the ship or the smart structure.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.28-37
• /
• 2017

Purpose: This paper proposes a procedure that may infer and identify interaction failures in a module. Methods: In design FMEA, we defined an interaction model between components and proposed a method for selecting a single component by using the standard specification classification table and four methods for choosing the related components. We also introduced the function tree for function and requirement characteristic analysis and proposed utilization of standard stress lists and 1st and 2nd stress analysis tables to determine the effect the stress analysis has on interactions. Finally, the interaction mechanism diagram was proposed and used to infer the failure mechanism. Process FMEA also established procedures in a similar way. Results: We established a procedure for predicting the failure mode due to interaction between components based on Company A's multi-step FMEA procedure. Conclusion: By applying the proposed interaction FMEA procedure to the development model, we were able to confirm the effect of the new derivation on the failure mode of interaction, which was not predicted by the existing FMEA.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.54-61
• /
• 2001

The purpose of this study is establishing effective multimodal logistics structure in northeast Asia. For this end, the interface between transport modes, construction method of rail-ferry transport system, system operation and implementation strategies by step were studied. Rail-ferry system have a competition over present transportation system in international cargo trade market between Korea and China. And, the operation of rail-ferry transportation system between Korea and China is meaningful project in the point of providing various choices to clients. Korea and China should have agreements in trade, customs duties, ports in the next year for the success of this project.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.250-254
• /
• 1995

The proposed GTO converter system has the better harmonic characteristics, especially, in the distortion factor (55%), than the conventional 12-step converter system. The improved harmonic characteristics was achieved through the unsymmetrical angle control of the each converter. In addition, the proposed system can save the cost (20%), spase (50%) and weigh (8%). The proposed system was studied in simulation and experiment.

• 한국기계가공학회지
• /
• 제4권3호
• /
• pp.45-50
• /
• 2005

A roll forming process for an automotive part of high strength steel is developed. The preliminary flower is generated semi-automatically by an AutoLISP program. The roll forming process is approximated as a multi-step bending process and the preliminary flower is analyzed by the plane strain finite element method. Then, the first flower is selected and modified through the finite element analysis. With the final flower, forming rolls are designed and constructed. Experiments are carried out on a prototype roll forming machine.

• 정보와 통신
• /
• 제25권12호
• /
• pp.10-18
• /
• 2008

In this paper, we present a low-power design of H.264 codec based on dedicated hardware and software solution on EMP(ETRI Multi-core platform). The dedicated hardware scheme has reducing computation using motion estimation skip and reducing memory access for motion estimation. The design reduces data transfer load to 66% compared to conventional method. The gate count of H.264 encoder and the performance is about 455k and 43Mhz@30fps with D1(720x480) for H.264 encoder. The software solution is with ASIP(Application Specific Instruction Processor) that it is SIMD(Single Instruction Multiple Data), Dual Issue VLIW(Very Long Instruction Word) core, specified register file for SIMD, internal memory and data memory access for memory controller, 6 step pipeline, and 32 bits bus width. Performance and gate count is 400MHz@30fps with CIF(Common Intermediated format) and about 100k per core for H.264 decoder.

• Molecules and Cells
• /
• 제21권3호
• /
• pp.376-380
• /
• 2006

Gene expression is regulated in large part at the level of transcription under the control of sequence-specific transcriptional regulatory proteins. Therefore, the ability to affect gene expression at will using sequencespecific artificial transcription factors would provide researchers with a powerful tool for biotechnology research and drug discovery. Previously, we isolated 56 novel sequence-specific DNA-binding domains from the human genome by in vivo selection. We hypothesized that these domains might be more useful for regulating gene expression in higher eukaryotic cells than those selected in vitro using phage display. However, an unpredictable factor, termed the "context effect", is associated with the construction of novel zinc finger transcription factors--- DNA-binding proteins that bind specifically to 9-base pair target sequences. In this study, we directly selected active artificial zinc finger proteins from a zinc finger protein library. Direct in vivo selection of constituents of a zinc finger protein library may be an efficient method for isolating multi-finger DNA binding proteins while avoiding the context effect.

• 소성∙가공
• /
• 제18권6호
• /
• pp.444-447
• /
• 2009

Piston crown to the hot forge a unified nature of the product has a shape with multi-level step forging process, so if you are not a mechanical professional, this process could lead to a significant loss to the material. Therefore, material technology in minor terms; continue to improve the collection rate that undamaged the product material. The piston crown and the manufacturing products such as marine diesel engines are being forged to reduce costs and to improve mechanical properties. Piston crown molding is a hot forging process that works in large volume forging products. Because of the size of the hard plastic material flow process for improving the design and actual field experience through advanced plastic technology, it is important to interpret the results. Also for many experimental plastic procedures, the accumulation of results is very important.

• 한국재료학회지
• /
• 제16권2호
• /
• pp.111-115
• /
• 2006

High-finned tubes have good thermal conductivity and have better cooling efficiency than plain tubes or low-fined tubes due to bigger air contact area. During high-fined tubes are manufactured by roll forming, the main technique is illustrated to optimizing primary material(copper pipe), optimized die matrix designing technique for roll forming, control manufacturing speed to develop productivity etc. In this study, a roll forming system was developed in oder to produce high-finned tube. Also a multi-step roll forming die was designed & built to produce high-finned tube that has over 10 mm fin height. And then, roll forming test using copper pipe was performed to produce high-finned tube. Roll forming process for producing highfinned tube was optimized by analyzing and adjusting misrostructure, hardness, and surface roughness of roll formed high-fined tube.