Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Manufacturing Process for High-finned Tube of Copper Pipe using Roll Forming Method

전조공법을 이용한 동관의 하이핀 튜브 제조 공정에 대한 연구

  • Published : 2006.02.27
Download PDF
⟨ Previous Next ⟩

Abstract

High-finned tubes have good thermal conductivity and have better cooling efficiency than plain tubes or low-fined tubes due to bigger air contact area. During high-fined tubes are manufactured by roll forming, the main technique is illustrated to optimizing primary material(copper pipe), optimized die matrix designing technique for roll forming, control manufacturing speed to develop productivity etc. In this study, a roll forming system was developed in oder to produce high-finned tube. Also a multi-step roll forming die was designed & built to produce high-finned tube that has over 10 mm fin height. And then, roll forming test using copper pipe was performed to produce high-finned tube. Roll forming process for producing highfinned tube was optimized by analyzing and adjusting misrostructure, hardness, and surface roughness of roll formed high-fined tube.

Keywords

References

  1. C. P. Tso, Y .C. Cheng and A. C. K. Lai, Applied Thermal Engineering, 26(1), 111 (2005) https://doi.org/10.1016/j.applthermaleng.2005.04.009
  2. W. Pirompugd, S. Wongwises and C. C. Wang, Int. J. of Heat and Mass Transfer, 3, (2005) https://doi.org/10.1016/j.ijheatmasstransfer.2006.03.032
  3. S. B. Genic, B. M. Jacimovic and B. R. Latinovic, Applied Thermal Engineering, 7, (2005) https://doi.org/10.1016/j.applthermaleng.2005.07.017
  4. Q. Yu, A. G. Straatman and B. E. Thompson, Applied Thermal Engineering, 26(2-3), 131 (2005) https://doi.org/10.1016/j.applthermaleng.2005.06.004
  5. G. Fabbri, Control Engineering Practice, 13(7), 929 (2005) https://doi.org/10.1016/j.conengprac.2004.11.009
  6. W. S. Chang, C. C. Wang and C. C. Shieh, Applied Thermal Engineering, 29, (2005)
  7. Y. H. Kim and Y, C. Kim, Int. J. of Refrigeration, 28(6), 851 (2005) https://doi.org/10.1016/j.ijrefrig.2005.01.013
  8. Metallography and Microstructures, Metals Handbook 9th Ed., ASM Int., Ohio, 775 (2004)
  9. N. E. Dowling, Mechanical Behavior of Materials, 2nd Ed. Prentice Hall, Inc., New Jersey, 139 (1999)