• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.199-207
• /
• 2003

The Timoshenko beam model has been known as the most accurate model for representing beam structures. However, the Timoshenko beam model may give rise to a significant error when it is applied to multi-stepped beam structures. This paper is intended to demonstrate the modeling error of Timoshenko beam based finite element model for multi-stepped beam structures and to suggest a new modeling method to improve the accuracy. A tentative bending spring is introduced into the stepped section to represent the softening effect due to the presence of step. This paper also proposes a finite element modeling method in the light with the tentative bending spring model for the step softening effect. The proposed method rigorously adapts computation results from a commercial finite element code. The validity of the proposed method is demonstrated through a series of simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.400-402
• /
• 1995

A novel type of single phase multi-step inverter is proposed, which has twelve-stepped levels of the output voltage. In this inverter the waveform of the output votage has smaller harmonic contents than those of a conventional six-step inverter. In this paper a new multi-step technique is analyzed. This new multi-step technique of the twelve-stewed single phase voltage source inverter has the advantage compared with the conventional six-step inverter, and the experimental results are proved by the calculation using spectrum-analyzer.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.479-484
• /
• 2000

The reliable estimation of the system parameters and the accurate prediction of the system behavior are important to design tunnel safely and economically. Therefore, the back analysis using the field measurements data is useful to evaluate the geotechnical parameter for tunnel. In the back analysis method, the selection of initial value and uncertainty of field measurements influence significantly on the analysis result. In this paper, to overcome uncertainty of field measurements, we performed the back analysis using the displacement data gained at each step of excavation and support.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권10호
• /
• pp.2479-2496
• /
• 2013

Increasing demand for Full High-Definition (FHD) video and Ultra High-Definition (UHD) video services has led to active research on high speed video processing. Widespread deployment of multi-core systems has accelerated studies on high resolution video processing based on parallelization of multimedia software. Even if parallelization of a specific decoding step may improve decoding performance partially, such partial parallelization may not result in sufficient performance improvement. Particularly, entropy decoding has often been considered separately from other decoding steps since the entropy decoding step could not be parallelized easily. In this paper, we propose a parallelization technique called Integrated Multi-Threaded Parallelization (IMTP) which takes parallelization of the entropy decoding step, with other decoding steps, into consideration in an integrated fashion. We used the Simultaneous Multi-Threading (SMT) technique with appropriate thread scheduling techniques to achieve the best performance for the entire decoding step. The speedup of the proposed IMTP method is up to 3.35 times faster with respect to the entire decoding time over a conventional decoding technique for H.264/AVC videos.

• Nuclear Engineering and Technology
• /
• 제49권2호
• /
• pp.404-410
• /
• 2017

In order to help decision-makers in the early design phase to improve and make more cost-efficient system safety and reliability baselines of aircraft design concepts, a method (Multi-objective Optimization for Safety and Reliability Trade-off) that is able to handle trade-offs such as system safety, system reliability, and other characteristics, for instance weight and cost, is used. Multi-objective Optimization for Safety and Reliability Trade-off has been developed and implemented at SAAB Aeronautics. The aim of this paper is to demonstrate how the implemented method might work to aid the selection of optimal design alternatives. The method is a three-step method: step 1 involves the modelling of each considered target, step 2 is optimization, and step 3 is the visualization and selection of results (results processing). The analysis is performed within Architecture Design and Preliminary Design steps, according to the company's Product Development Process. The lessons learned regarding the use of the implemented trade-off method in the three cases are presented. The results are a handful of solutions, a basis to aid in the selection of a design alternative. While the implementation of the trade-off method is performed for companies, there is nothing to prevent adapting this method, with minimal modifications, for use in other industrial applications.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제37권5호
• /
• pp.386-393
• /
• 2010

영상에서 일정 영역의 화소들이 불규칙적인 형태를 이루는 것을 불량이라 하는데 이를 수학적으로 정확히 정의하기 어렵다는 점이 불량 검출을 쉽지 않게 한다. 하지만 주어진 영상이 다수의 반복되는 패턴을 가지고 있다면 불량이 아닌 영역은 그 외의 다른 영역들로 설명되어 될 수 있다는 점을 이용하여 영상내의 불량 영역을 찾아낼 수 있다. 따라서 본 논문은 이러한 특성을 이용하여 다양한 패턴이 반복되는 영상에 존재하는 불량을 검출하는 방법을 제시한다. 제시된 방법은 크게 세 단계로 이루어진다. 첫 번째 단계는 interest point 검출단계이다. 두 번째 단계는 적절한 패치의 크기를 결정하는 단계이다. 마지막으로 세 번째 단계는 불량을 검출하는 단계이다. 제시된 방법은 반도체 wafer를 SEM을 이용하여 촬영한 영상들을 통하여 예증된다.

• 대한토목학회논문집
• /
• 제29권4B호
• /
• pp.377-384
• /
• 2009

다중 계단으로 근사한 사주지형 위를 지나는 선형 파랑전파에 대한 고유함수 전개법에서 크기가 큰 행렬을 풀 때 계산시간을 상당히 단축하기 위하여 분할행렬법을 사용하여 반사율을 계산하였다. 본 모형에 10개의 억류파를 사용하여 현재까지 가장 정밀한 수치해를 구하였고 구한 반사율의 거동은 몇 경우에서 기존 결과와 다름을 보였다. 크기가 큰 행렬을 풀 때 본 분할행렬법의 계산시간과 기억용량은 여전히 커서 효율적인 방법에 대한 개발이 요구된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.62-64
• /
• 1996

Neural network as a controller of a nonlinear system and a system identifier has been studied during the past few years. A well trained neural network identifier can be used as a system predictor. We proposed the method to design multi-step ahead predictor and multi-step predictive controller using neural network. We used the input and out put data of B system to train the NNP and used the forecasted approximat system output from NNP as B input of NNC. In this paper we used two-step ahead predictive controller to test B heating controll system and compared with PI controller.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.26.4-27
• /
• 2008

The completion ('initiation' de facto) of the KASI Orbit Propagator and Estimator (KASIOPEA) has been delayed for several reasons unfortunately. Due to the lack of working staffs and the Division priority rearrangement, the initial plan was dismantled and ignored for many years. However, fundamental researches regarding the essential parts of KASIOPEA has been done by author. The numerical integration module of the KASIOPEA is the most sensitive part in the precision of the final output in general. There is no silver bullet in the numerical integration in an orbit propagation as a non-stiff ODE case. Many numerical integration method like single-step methods, multi-step method, and extrapolation methods have been used in overly populated orbit propagator or estimator. In this study, several popular methods from single-step, multi-step, and extrapolation methods have been tested in numerical accuracy and stability.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.840-844
• /
• 2002

A spherical $BaMgAl_{10}$ $O_{17}$ :Eu phosphor has been synthesized by a multi-step precipitation route. In order to successfully synthesize the phosphor with spherical shape, the hydrated-alumina particles should be controlled for spherical shape. In this process, the hydroxypropyl cellulose (HPC) was used as a dispersing reagent. This reagent plays an important role in that the particles were controlled to have the uniform size of sub-micron. The final product prepared by the multi-step precipitation method maintained spherical shape with uniform size of 0.4$\mu\textrm{m}$. It can be seen in X-ray diffraction patterns, formation of the single phase of $BaMgAl_{10}$ $O_{17}$ :Eu phosphor prepared by the multi-step precipitation method at $1350^{\circ}C$. Also, the emission spectra of spherical $BaMgAl_{O}$ $10_{17}$ :Eu phosphor in the present case was compared with those of commercially-available blue phosphor under VUV (Vacuum Ultra Violet) excitation. The luminescence process of the $BaMgAl_{10}$ $O_{17}$ :Eu phosphor is characterized by the $4f^{6}$$5d^1$longrightarrow4f$^{7}$ transition (blue) of the $Eu^{2+}$ ion acting as an activating center and the maximum luminescence intensity was obtained by reduction treatment at 145$0^{\circ}C$.