• Structural Engineering and Mechanics
• /
• 제8권3호
• /
• pp.243-256
• /
• 1999

Using appropriate transformations, the differential equation for flexural free vibration of a cantilever bar with variably distributed mass and stiffness is reduced to a Bessel's equation or an ordinary differential equation with constant coefficients by selecting suitable expressions, such as power functions and exponential functions, for the distributions of stiffness and mass. The general solutions for flexural free vibration of one-step bar with variable cross-section are derived and used to obtain the frequency equation of multi-step cantilever bars. The new exact approach is presented which combines the transfer matrix method and closed form solutions of one step bars. Two numerical examples demonstrate that the calculated natural frequencies and mode shapes of a 27-storey building and a television transmission tower are in good agreement with the corresponding experimental data. It is also shown through the numerical examples that the selected expressions are suitable for describing the distributions of stiffness and mass of typical tall buildings and high-rise structures.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.855-857
• /
• 2011

In this paper, we proposed EEAR(Efficient Energy Alternative Routing). This is a method of selecting a backup node for path routing management. When some node disconnection on the path routing, using pre-selected backup node provides immediately recover the path recovery. When selecting a Step-Parents node on the path management, the node' s energy level and distance information are cared in context-awareness. This not only increased the system' s capacity cost effectively, but also reduce transmission power entire nodes consume energy. As a result, each node could efficiently management and improves the life time for mobile host and extends system coverage.

• 한국전산유체공학회지
• /
• 제5권1호
• /
• pp.1-7
• /
• 2000

In general, FDM(finite difference method) and FVM(finite volume method) are used for analyzing the fluid flow numerically. However it is difficult to apply them to problems involving complex geometries, multi-connected domains, and complex boundary conditions. On the contrary, FEM(finite element method) with coordinates transformation for the unstructured grid is effective for the complex geometries. Most of previous studies have used commercial codes such as KIVA or STAR-CD for the flow analyses in the engine cylinder, and these codes are mostly based on the FVM. In the present study, using the FEM for three-dimensional, unsteady, and incompressible Navier-Stokes equation, the velocity and pressure fields in the engine cylinder have been numerically analyzed. As a numerical algorithm, 4-step time-splitting method is used and ALE(arbitrary Lagrangian Eulerian) method is adopted for moving grids. In the Piston-Cylinder, the calculated results show good agreement in comparison with those by the FVM and the experimental results by the LDA.

• 한국표면공학회지
• /
• 제47권4호
• /
• pp.192-197
• /
• 2014

Red-emitting nitride phosphors recently attracted considerable attention because of their high thermal stability and high color rendering index properties. For excellent phosphor of white light-emitting-diode, ternary nitride phosphor of $Sr/SmSi_5N_8:Eu^{2+}$ with different $Eu^{2+}$ ion concentration were synthesized by solid state reaction method. In this work, red-emitting nitride $Sr/SmSi_5N_8:Eu^{2+}$ phosphor was successfully synthesized by using multi-step high frequency induction heat treatment. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Sr/SmSi_5N_8:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Sr/SmSi_5N_8:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 300 - 550 nm, namely from UV to visible area with distinct enhanced emission peaks. With an increase of $Eu^{2+}$ ion concentration, the peak position of emission in spectra was red-shifted from 613 to 671 nm. After via multi-step heat treatment, prepared phosphor showed excellent luminescence properties, such as high emission intensity and low thermal quenching, better than commercial phosphor of $Y_3Al_5O_{12}:Ce^{3+}$. Using $Eu_2O_3$ as a raw material for $Eu^{2+}$ dopant with nitrogen gas flowing instead of using commercial EuN chemical for $Sr/SmSi_5N_8:Eu^{2+}$ synthesis is one of characteristic of this work.

• 디지털융복합연구
• /
• 제15권10호
• /
• pp.445-454
• /
• 2017

최근 일반인을 위해 악기를 다루지 못하더라도 앱이나 웹에서 마치 놀이를 하듯이 연주하는 방법이 각광받고 있다. 그 이유는 자연스러운 우연성(randomness)의 연주 형태를 지니고 있기 때문이라고 판단된다. 따라서 관조적 관람객을 유인시키고 능동적으로 변화시키는 '우연 작동법'을 런치패드를 활용하여 이론적 배경과 사례분석을 통해 영상시스템을 개발, 제시하였다. 스텝시켄서 개발은 외부 프로그램으로 연결시켜 영상시스템을 스텝시켄서로 구현하는 방법과 모션 클립(Clip)들로 만들어 런치패드의 키(Key)마다 배치하여 실행시키는 키보드 런치형으로 구분하여 2가지 타입으로 개발하였으며, 최종 영상시스템을 통해 파생된 최적화 문제점과 해결책을 제시하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.504-509
• /
• 2003

In this paper, a multi-step optimization using a G.A.(Genetic Algorithm) with variable penalty function is introduced to the structural design optimization of a high speed machining center. The design problem, in this case, is to find out the best cross-section shapes and dimensions of structural members which minimize the static compliance, the dynamic compliance, and the weight of the machine structure simultaneously. The first step is the cross-section shape optimization, in which only the section members are selected to survive whose cross-section area have above a critical value. The second step is a static design optimization, in which the static compliance and the weight of the machine structure are minimized under some dimensional constraints and deflection limits. The third step is a dynamic design optimization, where the dynamic compliance and the structure weight are minimized under the same constraints as those of the second step. The proposed design optimization method was successful applied to the machining center structural design optimization. As a result, static and dynamic compliances were reduced to 16% and 53% respectively from the initial design, while the weight of the structure are also reduced slightly.

• 한국축산식품학회지
• /
• 제41권1호
• /
• pp.59-70
• /
• 2021

A method for simultaneous detection of fipronil (F) and its metabolites fipronil desulfinyl (FD), fipronil sulfide (FS), fipronil sulfone (FSO) in chicken eggs was applied and validated. It includes single-step, cheap, effective, rugged, safe-based method (SinChERS) for sample preparation and ultra high performance liquid chromatography coupled with mass spectrometry (UHPLC-MS/MS) for chemical analysis. Results suggested that formic acid enhanced the recovery of 4 target residues and 1% supplementation to acetonitrile gained higher recoveries than that of 5%. SinChERS integrated extraction and clean-up steps into one, with shorter time (1.5 h) to operate and higher recoveries (97%-100%) than HLB, Envi-Carb-NH2 and quik-easy-cheap-effective-rugged-safe method (QuEChERS), and it consumed the smallest volume of extracting solvent (10 mL) as QuEChERS. Quantitative analyses using external standard method suggested the linear ranges of 4 target compounds were 1-20 ㎍/L with R2 >0.9947. The limit of detection (S/N>3) and quantification (S/N>10) were 0.3 ㎍/kg and 1 ㎍/kg. Recoveries ranged from 89.0% to 104.4%, and the relative standard deviations (n=6) at 1, 10, and 20 ㎍/kg were lower than 6.03%. Thirty batches of domestic eggs (500 g each) were detected by the established SinChERS-based UHPLC-MS/MS and no target residues were detected in all samples. The method developed in this study is a rapid, sensitive, accurate and economic way for multi-residue analysis of fipronil and its metabolites in eggs.

• 대한전자공학회논문지
• /
• 제26권8호
• /
• pp.1187-1196
• /
• 1989

In this paper, a method for computing the capacitance parameter for a multi-interconnection line in a multilayered dielectric region is presented. The number of interconnection lines and the number of dielectric layers are arbitrary, and the interconnection lines are finite cross section or infinite cross section. The surface of lines and dielectric interface are divided into subsection. The surface charge density of each subsection is a constant step-pulse function for each subsection. After the solution of surface charge density is effected by the method of moments, capacitance parameter is calculated.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.135-140
• /
• 2001

Interlace texturing is very useful method to make compound yarns for new synthetic fabrics. In this study, we make the compound ems for peach skin fabric by interlace texturing method. This study surveys relationship between physical properties of interlace textured yarns and process conditions such as air pressure, yarn tension and take-up speed. Nip density, tensile properties and multi-step shrinkage of the various specimens were discussed with process conditions.

• 한국통신학회논문지
• /
• 제30권11A호
• /
• pp.1021-1026
• /
• 2005

본 논문에서는 시변 페이딩 채별에 적합한 멀터스텝 LS 선형예측기를 갖는 새로운 예측 CDMA 폐루프 전력 제어 방식을 제안한다. 제안된 방식은 다중 전력 제어 그룹 지연을 효과적으로 보상하여 주며 단일 스텝 예측기를 갖는 기존의 예측 CLPC 방식이나 비예측 CLPC 방식에 비하여 우수한 성능 이득을 갖는다.