• International Journal of Reliability and Applications
• /
• v.15 no.1
• /
• pp.23-50
• /
• 2014

This paper deals with formulation of optimum multi-objective modified step-stress accelerated life test (ALT) plan for Burr type-XII distribution under type-I censoring. Since it is impractical to estimate only one objective parameter after conducting costly ALT tests; also, it is not desirable to assume instantaneous changes in stress levels because of limited capacity of test equipments and the presence of undesirable failure modes, therefore, an optimum multi-objective modified step-stress ALT plan has been designed. The optimal test plan consists in determining the optimum low stress level and optimal time at which stress starts linearly increasing from low stress by minimizing the weighted sum of the asymptotic variances of the maximum likelihood estimator of quantile lifetimes at design constant stress. The method developed has been illustrated using an example. Sensitivity analysis has been carried out. Comparative study has also been done to highlight the merits of the proposed model.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.2
• /
• pp.71-82
• /
• 2008

In this study, 3 dimensional non-linear race car vehicle model including Chassis, steering and suspension systems were modeled by using Multi-Body Dynamics Simulation Program, DADS 9.5(Dynamic Analysis and Design System),which was used in kinematic and dynamic analysis. A full race car vehicle dynamics model using DADS program was presented and analysis was carried out to estimate the handling characteristics that may be very useful to design a race car in early design stage. The simulation of vehicle handling behavior for step steering input was simulated and compared with different design parameters: torsional stiffness of the front and rear anti roll bars, the motion ratio of the front and rear suspension system, the location of the tie rod joint, in multibody dynamic model. Therefore this simulation model before race car construction in early design step will be helpful for race car designer to save time and limited budget.

• Tunnel and Underground Space
• /
• v.6 no.4
• /
• pp.326-334
• /
• 1996

In underground construction the multi-step excavation sequence is commonly adopted for the convenience of the underground work. A numerical simulation method which is capable of analyzing the effects of excavation sequence on the stability of the opening is greatly needed. In this study a two dimensional finite element code was developed based on the effective numerical algorithm for the multistep excavation. The practical applicability of the model was verified for the simplified excavation sequences.

• IE interfaces
• /
• v.11 no.1
• /
• pp.85-95
• /
• 1998

This study is focussed on an optimal vehicle routing model for multi-supply centers in two-echelon logistic system. The aim of this study is to deliver goods for demand sites with optimal decision. This study investigated an integrated model using step-by-step approach based on relationship that exists between the inventory allocation and vehicle routing with restricted amount of inventory and transportations such as the capability of supply centers, vehicle capacity and transportation parameters. Three sub-models are developed: 1) sector-clustering model, 2) a vehicle-routing model based on clustering and a heuristic algorithm, and 3) a vehicle route scheduling model using TSP-solver based on genetic and branch-and-bound algorithm. Also, we have developed computer programs for each sub-models and user interface with visualization for major inputs and outputs. The application and superior performance of the proposed model are demonstrated by several sample runs for the inventory-allocation and vehicle routing problems.

• Asia-Pacific Journal of Atmospheric Sciences
• /
• v.54 no.4
• /
• pp.611-622
• /
• 2018

Observed climate data are processed under the assumption that their time series are stationary, as in multi-step temperature and precipitation prediction, which usually leads to low prediction accuracy. If a climate system model is based on a single prediction model, the prediction results contain significant uncertainty. In order to overcome this drawback, this study uses a method that integrates ensemble prediction and a stepwise regression model based on a mean-valued generation function. In addition, it utilizes empirical mode decomposition (EMD), which is a new method of handling time series. First, a non-stationary time series is decomposed into a series of intrinsic mode functions (IMFs), which are stationary and multi-scale. Then, a different prediction model is constructed for each component of the IMF using numerical ensemble prediction combined with stepwise regression analysis. Finally, the results are fit to a linear regression model, and a short-term climate prediction system is established using the Visual Studio development platform. The model is validated using temperature data from February 1957 to 2005 from 88 weather stations in Guangxi, China. The results show that compared to single-model prediction methods, the EMD and ensemble prediction model is more effective for forecasting climate change and abrupt climate shifts when using historical data for multi-step prediction.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.1
• /
• pp.33-40
• /
• 2010

Because sampling interval for data collection tends to be short compared with the overall processing time, in chemical process, instrumental process related tanks or furnace collected data have a significant autocorrelation. Insufficient control technique and frequent control actions cause unstable condition of the process. Traditional control charts which were developed based on iid (independently and identically distributed) among data cannot be applied on the existence of autocorrelation. Also unstable process is difficult to identity or diagnose. Because large-scale process has a lot of measurable variables and multi-step-structures among data, it is difficult to find relation between measurable variables and nonconformity. In this paper, we suggested an appicable model to diagnose the process and to find relation between measurable variables (CTQ) and nonconformity in the process having autocorrelation, unstable condition frequently, a lot of measurable variables, and multi-step-structure. And we applied this model to real process, to verify that the process engineers could easily and effectively diagnose the process and control the nonconformity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1931-1934
• /
• 2006

The accuracy impact of using high-order Boussinesq-type model as compared to the typical order model is examined in this paper. The multi-layer model developed by Lynett and Liu(2004a) is used for simulating of wave breaking over a step region. The overall comparisons between the two-layer model and the hydraulic experiments are quite good. The one-layer model overshoals the wave near the breakpoint, while the two-layer model shoals at a rate more consistent with the experimental data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.108-113
• /
• 2002

This paper presents a multi-step structural design optimization method fur machine tool structures using a genetic algorithm with dynamic penalty. The first step is a sectional topology optimization, which is to determine the best sectional construction that minimize the structural weight and the compliance responses subjected to some constraints. The second step is a static design optimization, in which the weight and the static compliance response are minimized under some dimensional and safety constraints. The third step is a dynamic design optimization, where the weight static compliance, and dynamic compliance of the structure are minimized under the same constraints. The proposed design method was examined on the 10-bar truss problem of topology and sizing optimization. And the results showed that our solution is better than or just about the same as the best one of the previous researches. Furthermore, we applied this method to the topology and sizing optimization of a crossbeam slider for a high-speed machining center. The topology optimization result gives the best desirable cross-section shape whose weight was reduced by 38.8% than the original configuration. The subsequent static and dynamic design optimization reduced the weight, static and dynamic compliances by 5.7 %, 2.1% and 19.1% respectively from the topology-optimized model. The examples demonstrated the feasibility of the suggested design optimization method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.456-460
• /
• 1996

A nonlinear control scheme for preventing limit cycle due to the nonlinearity of themulti-step bang-bang actuator in mechanical position control systems is proposed. A linearized model, SIDF, fora multi-step bang-bang actuator is introduced to compensate the nonlinearity of the multi-step bang-bang actuator. Using that model, a $H_{\infty}$robust controller for position control systms with a bang-bang actuator is proposed by loop shaping tecniques with normalized coprime factorization stabilization to address the robustness. The proposed scheme needs a smaller deadband as a result of compensating the nonlinearity of the bang-bang actuator. A single-axis servo system is served in order to verify the proposed control scheme experimentally. Experimental results show that the controller can satisfy the special intersts, silent contact switching of the actuator.r.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.20-25
• /
• 2008

The finite element analysis for porous media is severe job because constituents have different physical peoperties, and element's continuity and stability should be considered. Thus, we propose the new mixed finite element method in order to overcome the problems. In this method, multi time step, remeshing step, and sub iteration step are introduced. The multi time step and remeshing step make it possible to satisfy a stability and an accuracy during sub iteration in which global time is determined. Finally, the proposed method is compared with the ABAQUS(2007) software and exact solution(Schiffman 1967) through two dimensional consolidation model.