• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.254-258
• /
• 2009

In this paper, the low frequency vibration forming system is developed for micro-patterns formation on the metal substrate. many researchers have studied about micro-forming technologies such as micro deep drawing, press forming, forging, extrusion etc. for the formation of precise micro-patterns on the surface of metal substrates, multi-step forming process must be used to improve qualifies of the deformed patterns. Since the low frequency vibration forming system could easily deform the surface of metal substrates, several steps of multi-step forming process should be removed by using the low frequency vibration forming system. In order to find optimal process conditions, we have carried out low frequency vibration forming process with varying the vibration frequency from 110Hz to 500Hz.

• Journal of Power Electronics
• /
• 제13권2호
• /
• pp.214-222
• /
• 2013

This paper proposes a high efficiency step-down flyback converter using a coaxial-cable coupled-inductor which has a higher primary-secondary flux linkage than sandwich winding transformers. The structure of the two-winding coaxial cable transformer is described, and the coupling coefficient of the coaxial cable transformer and that of a sandwich winding transformer are compared. A circuit model of the proposed transformer is also obtained from the frequency-response curves of the secondary short-circuit and of the secondary open-circuit. Finally, the performance of the proposed transformer is validated by the experimental results from a 35W single-output flyback converter prototype. In addition, the proposed two-winding coaxial transformer is extended to a multiple winding coaxial application. For the performance evaluation of the extended version, 35W multi-output hardware prototype of the DC-DC flyback converter was tested.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.356-361
• /
• 2008

Eigenvalue reduction schemes approximate the lower eigenmodes that represent the global behavior of the structures. In the previous study, we proposed a two-level condensation scheme (TLCS) for the construction of a reduced system. And we have improved previous TLCS with combination of the iterated improved reduced system method (IIRS) to increase accuracy of the higher modes intermediate range. In this study, we apply previous improved TLCS to multi-level sub-structuring scheme. In the first step, the global system is recursively partitioned into a hierarchy of sub-domain. In second step, each uncoupled sub-domain is condensed by the improved TLCS. After assembly process of each reduced sub-eigenvalue problem, eigen-solution is calculated by Lanczos method (ARPACK). Finally, Numerical examples demonstrate performance of proposed method.

• East Asian mathematical journal
• /
• 제27권1호
• /
• pp.35-49
• /
• 2011

In this paper, we study multi-step iterative algorithm with errors and give the necessary and sufficient condition to converge to com mon fixed points for a finite family of asymptotically quasi-nonexpansive type mappings in Banach spaces. Also we have proved a strong convergence theorem to converge to common fixed points for a finite family said mappings on a nonempty compact convex subset of a uniformly convex Banach spaces. Our results extend and improve the corresponding results of [2, 4, 7, 8, 9, 10, 12, 15, 20].

• 한국축산식품학회지
• /
• 제35권4호
• /
• pp.431-440
• /
• 2015

Chicken bone is not adequately utilized despite its high nutritional value and protein content. Although not a common raw material, chicken bone can be used in many different ways besides manufacturing of collagen products. In this study, a multi-step procedure was optimized to isolate chicken bone collagen for higher yield and quality for manufacture of collagen products. The chemical composition of chicken bone was 2.9% nitrogen corresponding to about 15.6% protein, 9.5% fat, 14.7% mineral and 57.5% moisture. The lowest amount of protein loss was aimed along with the separation of the highest amount of visible impurities, non-collagen proteins, minerals and fats. Treatments under optimum conditions removed 57.1% of fats and 87.5% of minerals with respect to their initial concentrations. Meanwhile, 18.6% of protein and 14.9% of hydroxyproline were lost, suggesting that a selective separation of non-collagen components and isolation of collagen were achieved. A significant part of impurities were selectively removed and over 80% of the original collagen was preserved during the treatments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.795-802
• /
• 2001

The commutation and control in matrix converters is more complicated as in voltage source converters. Natural freewheeling paths do not exist and the theoretic absent storage elements result in a direct coupled system of load and line currents as well as voltages. The paper offers an overview about staggered commutation and control policies in matrix converters. Based on the knowledge about load current direction and the signs of the line to line input voltages different multi-step commutation policies were derived. This paper examines the application of that policies in the case of space vector modulation and direct control methods with the focus on the resulting effects to the reference output voltage deviation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.278-282
• /
• 2003

There is a strong industrial demands for the development of light-vehicle to improve fuel efficiency. It is more effective to reduce weight of the parts directly driven by an automobile engine. So the saving in weight of wheels which is operated by an automobile engine improve fuel efficiency more than other parts. There are many step of sheet metal forming in fabricating automotive wheel, so that it is difficult to design process and tools of multi-stage stamping. Traditionally, design process and tools have depended on the experience of skilled workers and it has done by trial and error methods. However, it needs too much costs and time. Taguchi methods has an advantage of the number of required experiments and reliability compared with trial and error method. In this study, Taguchi methods and response surface methods are applied to design process and tools of automotive wheel. As a result, the principal variables are selected and process conditions are optimized.

• 한국항공운항학회지
• /
• 제25권3호
• /
• pp.44-50
• /
• 2017

This paper proposes arrival scheduling and advisory generation algorithms which can be used in the terminal airspace with Point-Merge procedures. The proposed scheduling algorithm consists of two steps. In the first step, the algorithm computes aircraft schedules at the entrance of the Point-Merge sequencing legs based on First-Come First-Served(FCFS) strategy. Then, in the second step, optimal sequence and schedules of all aircraft at the runway are computed using Multi-Objective Dynamic Programming(MODP) method. Finally, the advisories that have to be provided to the air traffic controllers are generated. To demonstrate the proposed algorithms, the simulation was conducted based on Jeju International Airport environments.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.92-95
• /
• 2011

케로신-산소 동축 로켓 분사기의 난류 연소를 수치적으로 연구하였다. 이 연구를 위하여 다단 준 총괄 반응 기구를 개발하였다. 이 반응 기구는 가상의 케로신 연료가 수소와 일산화 탄소로 분해된 이후 고온 영역의 상세 산화 반응들로 구성되어 있다. 난류 연소의 LES 해석을 위하여 5차의 WENO 기법을 이용하였다. 반응 및 비 반응 유동의 난류 특성을 살펴 보았으며 리세스의 존재가 난류의 생성과 연소에 미치는 영향을 살펴보는 심화 연구를 수행하였다.

• 제어로봇시스템학회논문지
• /
• 제18권11호
• /
• pp.1051-1058
• /
• 2012

The unified lateral control algorithm for automatic valet parking for various types of vehicles is presented and its feasibility is shown experimentally via field tests for the given parking scenario. First, a trajectory generation algorithm for forward driving and backward multi-step parking maneuvers is developed. Then, with consideration of different types of vehicles and operating conditions, a kinematic vehicle model is used and validated using field test data. Using the nonlinear vehicle model, the lateral controller is designed based on dynamic surface control. Finally the proposed lateral control law is validated via hardware-in-the-loop simulations for different types of vehicles and experimentally using a test vehicle through field tests.