• 한국항행학회논문지
• /
• 제20권3호
• /
• pp.182-189
• /
• 2016

본 논문에서는 해양관측을 위한 멀티 홉 릴레이 네트워크 기반의 부이 시스템을 제안한다. 제안된 시스템은 다양한 센서 모듈과 게이트웨이, 무선 통신부, 원격 모니터링부로 구성된다. 센서 모듈은 다양한 통신 인터페이스와 통합되고 CAN 버스 기반의 단일화된 프로토콜을 통하여 제안하는 부이 시스템의 게이트웨이와 연결된다. 제안한 시스템은 원격 모니터링 사이트와 무선으로 데이터를 주고 받으며 통신 커버리지를 더욱 확대하기 위하여 LTE 통신 및 XBee 메쉬 네트워크 모듈을 사용한다. 필드 테스트를 통하여 제안하는 다중 홉 릴레이 네트워크 기반의 부이 시스템이 다중 홉을 이용하여 부이의 통신 도달 거리를 더욱 확장할 수 있음을 확인할 수 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.489-493
• /
• 2004

The Modulation Transfer Function (MTF) is commonly used to characterize the spatial quality of imaging systems. This work is the attempt to measure the MTF for KOMPSAT EOC using the non-parametric method as ground inputs. The spatial performance of the KOMPSAT EOC was analyzed by edge method while in flight using multi-temporal image data collected over test site in Seoul. The results from this work demonstrate the potential applicability of this method to estimate MTF for high spatial resolution satellite KOMPSAT-2 that is being developed to be launched in 2005.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.573-576
• /
• 2003

In butterfly control valve, a multi-hole orifice is attached downstream of valve to stabilize flow fluctuation. The computational simulation is conducted to analyze valve flow characteristics. The results show that the velocity distribution of downstream of valve with the orifice is improved compared to non-orifice case. Test result in site is 60% reduction in vibration.

• 방사성폐기물학회지
• /
• 제9권2호
• /
• pp.107-111
• /
• 2011

해체의 최종단계는 대상 부지 및 건물을 규제로부터 제외하는 것이다. MARSSIM은 부지를 개방하기 위한 최종현황조사를 수행함에 있어 요구되는 자료의 수집 등의 다양한 요건을 만족키기 위한 총괄적인 지침을 제공한다. 연구로 해체 후 부지 및 건물의 최종현황조사를 위해 MARSSIM에서 제시하고 있는 방법을 적용하였다. 연구로 부지의 특성을 반영한 개방기준을 도출하기 위해 RESRAD 및 RESRAD-Build 전산코드를 이용하여 부지 및 건물에 대해서 계산하였다. 부지 및 건물의 조사설계(Survey Design)를 위해서 잠재적 오염도 및 측정 결과를 활용하여 조사구역을 구분하였고, 개략조사 및 특성조사를 통해 수집된 다양한 결과에 기초하여 통계학적 검사를 통해 조사구역 별로 요구되는 시료의 수를 산정하게 된다. 측정된 결과에 기초하여 연구로 최종 개방기준에 만족하는 것으로 평가되었다.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1472-1480
• /
• 2016

지진, 홍수, 태풍 등의 자연 재해 및 화재, 테러 등 재난 발생시 현장 상황의 영상을 촬영하여 지휘본부에 위치한 서버에 전송하여 현장상황을 한 눈에 파악할 수 있게 하는 영상관리시스템이 요구된다. 본 논문에서는 영상관리시스템 구축에 필요한 성능 요소 정보를 파악하기 위해 와이파이 다이렉트 통신 기반의 애드혹 망 구성 방법을 제시하고 영상관리시스템에 대한 환경 구축을 통해 성능을 평가하였다. 평가한 성능 시험항목은 '영상 압축률 및 영상 크기에 따른 패킷 흐름 시험', '거리에 따른 패킷 흐름 및 트래픽 시험', 'LOS(Line of Sight) 여부에 따른 패킷 흐름 시험', '시나리오 성능 시험'이다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.665-666
• /
• 2015

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In construction site phase, especially the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. The purpose of this study is enable the cloud computing BIM server to provide several main function such as edit a model, 3D model viewer and checker, mark-up, snapshot in high-performance quality by proper design of VDI system. Concurrent client connection performance is a main technical index of VDI. Through test-bed server client, developed VDI system's multi-connect control will be evaluated. The performance-test result of BIM server VDI will effect to development direction of cloud computing BIM service for commercialization.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.171-181
• /
• 2004

A multi axis whetstone polishing system, which uses the flow system of the stone polishing machine head, has been developed. The test results show that the defect by line contact polishing does not occur in both ends of the stone and that it came to trim smoothly. In terms of the surface roughness, the corresponding index was decreased by 3.6 times, improving the polishing effect greatly. It decreased significantly the dust and noise with the wet polishing. The factors of the duty evasion at production site can thus be solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.385-392
• /
• 2008

Modern city have had a lot of high-rise building in high standards and multi-level performance. Using of city space reach better stages by using integration. These skyscraper have increased working load on ground. that building is efficiently designed for that soil capacity is well applied. With material side, big size pile, high strength concrete and high strength steel is used for that getting enough lobby space and resisting load increased of high-rise building. limit load test and load transmitted test can make soil capacity optimized. By the way, method of measuring pile capacity is more advanced and bigger. pile type applied by high rise building have underground excavation space, also reflect regional soil property and have some fact reviewed. A lot of high rise building recently is built as land mark in Seoul, Busan and Incheon. about method of measuring capacity of foundation pile, example of construction field is compared and reviewed.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.405-413
• /
• 2011

Defense Systems Test Center in ADD supports increasingly various missile test requirements such as higher altitude event, multi target operation and low-altitude, high velocity target tracking. In this paper, we have proposed the development of instrumentation radar tracking status simulator based on virtual reality. This simulator can predict the tracking status and risk of failure using several modeling algorithms. It consists of target model, radar model, environment model and several algorithms includes the multipath interference effects. Simulation results show that the predict tracking status and signal are similar to the test results of the live flight test. This simulator predicts and analyze all of the status and critical parameters such as the optimal site location, servo response, optimal flight trajectory, LOS(Line of Sight). This simulator provides the mission plan with a powerful M&S tool to rehearse and analyze instrumentation tracking radar measurement plan for live flight test at DSTC(Defense Systems Test Center).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.567-573
• /
• 2003

Korean High Speed Train (KHST) has been tested on high speed line in JungBu site since it was developed in 2002. The data acquisition system was developed to accomplish successfully this on-line test for proving the dynamic Performance of KHST. This system was consist of the personal computers based on National Instrument PXI modules and the test programs based on Labview 6i. This paper shows that this system is efficient to acquire the test data through the multi-channels connected the accelerometers which located in long distance places and flexible to change and add channels for data acquisition. The dynamic analysis of an on-line test is very complicate because the environmental conditions, as examples radius of curve, inclination of the track, tunnels, bridges, and so forth, and running conditions, as examples driving, braking, the number of working motors, and so forth, have an effect on the results. Therefor, the analysis method is important and this paper proposes the efficient procedure graphically, showing the proposed method simplify the accelerations of 5th bogie frame acquired during the on-line test for KHST.