• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.5219-5243
• /
• 2019

In electronic ticketing system, the malicious behavior of scalpers damages the customer's interest and disturbs the normal order of market. In order to solve the problem of scalpers, we took two steps. Firstly, we established the electronic ticketing system based on the consortium blockchain (CB-ETS). By establishing CB-ETS, we can make the ticketing market develop better in a controlled environment and be managed by the members in the consortium blockchain. Secondly, we put forward a kind of taxation mechanism for suppressing scalpers based on CB-ETS. Together with the regulatory mechanism, our scheme can effectively reduce the scalpers' profits and further inhibit scalpers. Through the above two steps, the scheme can effectively resist the malicious behavior of scalpers. Among them, in the process of transferring tickets, we optimized the transfer mechanism to achieve a win-win situation. Finally, we analyzed the security and efficiency of our scheme. Our scheme realizes the anonymity through the mixed currency protocol based on ring signature and guarantees the unforgeability of tickets by multi-signature in the process of modifying the invalidity of tickets. It also could resist to Dos attacks and Double-Spending attacks. The efficiency analysis shows that our scheme is significantly superior to relevant works.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.608-627
• /
• 2016

Wireless mesh networks (WMNs) based on IEEE 802.11s have emerged as one of the prominent technologies in multi-hop communications. However, the deployment of WMNs suffers from serious interference problem which severely limits the system capacity. Using multiple radios for each mesh router over multiple channels, the interference can be reduced and improve system capacity. Nevertheless, interference cannot be completely eliminated due to the limited number of available channels. An effective approach to mitigate interference is to apply dynamic channel switching (DCS) in WMNs. Conventional DCS schemes trigger channel switching if interference is detected or exceeds a predefined threshold which might cause unnecessary channel switching and long protocol overheads. In this paper, a P-learning based dynamic switching algorithm known as learning automaton (LA)-based DCS algorithm is proposed. Initially, an optimal channel for communicating node pairs is determined through the learning process. Then, a novel switching metric is introduced in our LA-based DCS algorithm to avoid unnecessary initialization of channel switching. Hence, the proposed LA-based DCS algorithm enables each pair of communicating mesh nodes to communicate over the least loaded channels and consequently improve network performance.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.6
• /
• pp.324-333
• /
• 2004

This paper discusses the development of an educational web-based power flow program for undergraduate students. The interaction between lectures and users can be much enhanced via the web-based programs which result in the student's learning effectiveness on the power flow problem. However the difficulties for developing web-based application programs are that there can be the numerous unspecified users to access the application programs. To overcome the aforementioned multi-users problem and to develope the educational web-based power flow program, we have revised the system architecture, the modeling of application programs, and database which efficiently and effectively manages the complex data sets related to the power flow analysis program. The developed application program is composed of the physical three tiers where the middle tier is logically divided into two kinds of application programs. The divided application programs are interconnected by using the Web-service based on XML (Extended Markup Technology) and HTTP (Hyper Text Transfer Protocol) which make it possible the distributed computing technology Also, this paper describes the method of database modeling to handle effectively when the numerous users change the parameters of the power system to compare the results of the base case.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.225-232
• /
• 2008

When a single source of multimedia contents is distributed to multiple reproduction devices, the audio and video contents require synchronous play for multi-channel stereo sound and lip-synchronization. The multimedia system in vehicle, especially, has researched to move to wireless environments from legacy wired environments. This paper proposes the advanced algorithm for providing synchronized services of real-time multimedia traffic in IEEE 802.11 WLANs [1]. For these, we implement the advanced IEEE 1588 Precision Time Protocol [2] and the environments for simulation. Also, we estimate and analysis performance of the algorithm, then we experiment and analysis after the porting of algorithm in wireless LAN devices (Linksys wrt-350n AP network device) to characterize timing synchronization accuracy.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.34-41
• /
• 2008

Existing mobility support scheme like MIPv4 has the delay at data transfer and Triangle routing problem. This paper proposes the new mobility support scheme and method that can overcome the problem using MPLS LSP in Next Generation Network. The proposed scheme overcomes the problem by introducing the LMS(Location Management Server) managing the location of the mobile terminal and the MPLS LSP between FA for a tunneling. We shows on the mathematical analysis using the queuing theory that this proposed scheme is more superior to the existing method(MIP).

• Journal of the Korea Society for Simulation
• /
• v.12 no.4
• /
• pp.73-81
• /
• 2003

An Ad Hoc network is a dynamic multi-hop wireless network that is established by a group of mobile hosts on a shared wireless channel by virtue of their proximity to each other. Since wireless transmissions are locally broadcast in the region of the transmitting host, hosts that are in close proximity can hear each other and are said to be neighbors. The transitive closure of the neighborhood of all the hosts in the set of mobile hosts under consideration forms an Ad Hoc network. Thus, each host is potentially a router and it is possible to dynamically establish routes by chaining together a sequence of neighboring hosts from a source to a destination in the Ad Hoc network. In a network, various real-time services require the network to guarantee the Quality of Services provided to the receiver. End-to-end QoS can be provided most efficiently when each layer of the protocol stack translates the requirements of the application into layer classified requirements and satisfies them. In this study, a mechanism to guarantee the QoS in Ad Hoc networks with buffer nodes is proposed. They effectively prevent traffic congestion and yield better transmission rate. In this way QoS is enhanced.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.733-746
• /
• 2005

In the context of multi-protocol label switching (MPLS) traffic engineering, this paper proposes a scalable constraintbased shortest path first (CSPF) routing algorithm with multiple QoS metrics. This algorithm, called the multiple constraint-based shortest path first (M_CSPF) algorithm, provides an optimal route for setting up a label switched path (LSP) that meets bandwidth and end-to-end delay constraints. In order to maximize the LSP accommodation probability, we propose a link weight computation algorithm to assign the link weight while taking into account the future traffic load and link interference and adopting the concept of a critical link from the minimum interference routing algorithm. In addition, we propose a bounded order assignment algorithm (BOAA) that assigns the appropriate order to the node and link, taking into account the delay constraint and hop count. In particular, BOAA is designed to achieve fast LSP route computation by pruning any portion of the network topology that exceeds the end-to-end delay constraint in the process of traversing the network topology. To clarify the M_CSPF and the existing CSPF routing algorithms, this paper evaluates them from the perspectives of network resource utilization efficiency, end-to-end quality, LSP rejection probability, and LSP route computation performance under various network topologies and conditions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.59-65
• /
• 2015

To build a flexible network than traditional transport network, the carrier ethernet technology is emerging in network industry recently and MPLS-TP technologies are being applied as a major standard technology for the carrier ethernet. However, network management technologies required to handle equipment installed in MPLS-TP network are not clear. This paper propose an efficient method to build a management network automatically without any additional configuration when network equipments are installed in MPLS-TP network. The proposed scheme reduce cost required for both equipment installation and network maintenance by minimizing configuration procedures of connecting management system with network. We evaluated the effectiveness of the proposed scheme by applying the scheme to a real MPLS-TP equipment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.50-58
• /
• 2013

In this paper, we present the implementation result of an UWB terminal for mobile tactical networks. Considering the major characteristics of the terminals of tactical networks, i) targeting voice service, ii) pedestrian users, and iii) demanding high network fidelity, we designed all protocol layers from physical layer to applications layer. The designed terminal is implemented in forms of software and hardware with RF ASIC, FPGA, DSP, and GPP. The functionality of the implemented terminal is validated by successfully performing 1 to 1 and multi-hop voice communication test.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.61-68
• /
• 2006

The factors influencing long-term prognosis of teeth must be carefully considered. Among these, attachment level is strongly associated with tooth loss. The purpose of the present study was to estimate pattern of attachment loss based on attachment area in extracted teeth. 197 satisfied the criteria for assessment after staining. The protocol described by Waerhaug(l975) was performed. An indir ect method, based on digital image abstracted from digital camera and digital imaging software program, was used to calculate the root surface area and the attachment loss area. The data were analysed using SPSS. Except maxillary central incisior and mandibular canine, no statistical significant differences between each root surfaces were observed in anterior teeth. In posterior teeth, statistical significant differences in palatal surface of maxillary molar and mandibular molar compared with others were observed. Statistical significant difference in buccal surface compared with others was lowly observed in single and multi rooted. This study did not reveal progressive loss pattern of attachment area in each root surface but clarified root surface that has relative high loss rate of attachment area at extraction. Thus understanding this pattern of attachment loss is helpful for dentist to treat the periodontitis.