• 제목/요약/키워드: Multi-phase flows

검색결과 77건 처리시간 0.034초

육상구조물군에 작용하는 지진해일파력의 3차원수치해석 (Numerical Analysis for Three-Dimensional Tsunami Force Acting on Multi-Onshore Structures)

  • 이광호;하선욱;이귀섭;김도삼
    • 대한토목학회논문집
    • /
    • 제31권2B호
    • /
    • pp.175-185
    • /
    • 2011
  • 본 연구에서는 복수의 육상구조물군에 작용하는 지진해일파력을 Navier-Stokes solver에 기초한 3차원혼상류해석법으로부터 수치적으로 검토하였다. 특히, 육상구조물의 배치형상과 호안에서의 이격거리 등에 따른 지진해일파력의 특성을 수치실험을 통해 조사하였다. 육상구조물군에 작용하는 지진해일파력에 대한 기존의 수리실험결과와 비교 및 분석하여 본 3차원수치해석의 적용성을 검토하였다. 그리고, 육상구조물에 작용하는 지진해일파력의 추정을 위해 정수압적인 방법과 동수압적인 방법을 각각 적용하여 기존실험결과 및 설계기준과의 비교를 통하여 3차원수치해석의 유용성을 검토하였으며, 기존실험결과와 수치해석결과를 동시에 고려하여 동수압적인 추정법에 관한 회귀식을 제안하였다. 이로부터 육상구조물에 작용하는 지진해일 파력의 산정에 관한 본 수치해석의 유용성을 확인할 수 있었다.

내부 버퍼와 단일 엔트리 캐슁을 이용한 다단계 패킷 분류 가속화 구조 (Fast Multi-Phase Packet Classification Architecture using Internal Buffer and Single Entry Caching)

  • 강대인;박현태;김현식;강성호
    • 대한전자공학회논문지TC
    • /
    • 제44권9호
    • /
    • pp.38-45
    • /
    • 2007
  • 새로운 인터넷 서비스가 등장하면서 진보된 인터넷 응용 기능을 처리하기 위한 패킷 분류 기능은 라우터의 중요한 동작으로 요구되고 있다. 다수의 패킷 필드를 대상으로 하는 패킷 분류 동작은 복잡하며 상대적으로 많은 시간을 요구하기 때문에 빠른 패킷 분류를 위한 알고리즘과 하드웨어 구조에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 가속화된 패킷 분류기능을 제공하기 위해 내부 버퍼를 사용한 다단계 패킷 분류 구조를 제안한다. 주소 필드 검색기와 다음 필드 검색기 사이에 내부 버퍼를 사용함으로써 송신 주소와 수신 주소의 검색 시간 차이로 인해 발생하는 지연 시간을 줄일 수 있게 되었다. 또한 동일 IP 주소 헤더 정보를 갖는 연속된 패킷의 입력으로 인한 성능 개선의 저하를 방지하기 위해 단일 엔트리 캐슁을 사용하여 성능 개선을 보장하였다. 제안하는 구조는 간단하며 검색 알고리듬에 국한되지 않고 보편적으로 적용될 수 있는 일반성을 갖고 있다.

다수의 주상체들의 저진폭 동위상 진동에 의한 2차 정상유동 해석 (Secondary Steady Flows Due to the Small-Amplitude In-Phase Oscillation of Multi-Cylinders)

  • 김성균
    • 대한기계학회논문집B
    • /
    • 제20권2호
    • /
    • pp.649-658
    • /
    • 1996
  • Small-amplitude harmonic oscillations of multi-cylinders are considered both experimentally and theoretically. For the theoretical model, the flow regime is separated into inner and outer regions. In the inner region, the flow is governed by the generalized Stokes boundary layer equation. In the outer region, the full Navier-Stokes equation for the steady streaming flow is solved numerically by using ADI scheme and FVM coupled with the boundary integral method. Flow visualization experiments are conducted by using the Laser Sheet Image Technique. The case of two circular cylinders and square cylinders with variable distances are chosen as a typical example. Although experimental results are based on the flow in the finite domain, both experimental and numerical results agree well qualitatively. As the separation of cylinders is increased, a numerical result shows the asymptotic convergence to a single cylinder case.

중력류 흐름에 대한 직접수치해석 (Direct Numerical Simulation of Gravity Currents)

  • 이재룡;;하만영
    • 대한기계학회논문집B
    • /
    • 제30권5호
    • /
    • pp.422-429
    • /
    • 2006
  • Resolved simulations are presented fur gravity current flows aiming at studying their spreading rate. The simulations are performed for two extreme configurations such as planar and cylindrical and for 3 different Grashof numbers: $10^5,\;1{\times}10^6\;and\;10^7$. Varying the size of the heavy fluid release, the study is performed for several phases of spreading, namely acceleration, slumping and inertial phases. For the simulations, efficient spectral multi-domain code is used. From the simulations results it is concluded that 2-D results predicts well the mean front velocity during the slumping phase, but fails to predict it during the inertial phase of spreading. It is also observed that the vortex dynamics of the flow is not reproduced well by the 2-D simulation.

다성분 탄화수소혼합물 포화물성해석 수렴도 향상 연구 (Study on the Convergency Improvement Method for the Saturation-Property Calculation of Multi-Component Hydrocarbon Systems)

  • 신창훈;안승희;이정환;성원모
    • 대한기계학회논문집B
    • /
    • 제34권10호
    • /
    • pp.947-955
    • /
    • 2010
  • 대부분의 석유 가스전은 탄화수소혼합물과 일반기체 등 저류층 내부 유체의 성분조성에 따라 저류층내 상거동 특성이 매우 민감하게 변화한다. 석유 가스전의 평가와 개발 생산계획을 수립함에 있어, 이러한 상거동에 따른 기체와 액체의 성분비 결정과 석유와 가스의 이상유동 해석을 위한 저류유체의 PVT관계 및 포화물성의 규명은 필수적이다. 이중에서 특히, 포화물성의 계산은 수렴성이 나빠, 이상 유동의 해석적 연구에 있어서 많은 어려움을 초래하는 원인이 되고 있다. 이에 본 연구에서는 포화물성 의 계산에 있어서 수렴도 향상을 위한 새로운 초기값 추정 방법과 근 탐색 알고리듬을 제안하고, 성능비교 등을 통한 수렴도 영향인자에 대한 분석을 시도하였다. 결과적으로, 제안된 방법을 통해 포화물성 해석 수렴성을 개선하였고 GUI 기반의 새로운 다성분 다상거동해석 시뮬레이터의 개발에 적용하였다.

오일러 격자체계에서 유체율 함수에 기초한 경계면 추적기법의 비교 (Comparison of Volume of Fluid (VOF) type Interface Capturing Schemes using Eulerian Grid System)

  • 김도삼;김탁겸;신범식;이광호
    • 한국해안·해양공학회논문집
    • /
    • 제32권1호
    • /
    • pp.1-10
    • /
    • 2020
  • 자유수면을 포함하는 파동장과 같이 단상의 경계가 시간발전에 따라 지속적으로 변화하는 경우나 액상과 기상이 혼합되는 문제에 있어서는 다상유동(multiphase flow) 문제를 적용하는 예가 증가하고 있다. 특히, 파동장과 같은 자유수면의 문제를 취급하는데 있어서는 혼합되지 않는 액상과 기상의 비압축성 뉴턴유체를 고려한 혼상류 모델이 적용되는 경우가 많다. 일반적으로 혼상류 모델은 각상의 경계면에 대한 시간기반 거동추적이 필수적이며, 궁극적으로는 계산의 정도를 좌우한다. 본 연구는 다양한 CFD 수치해석코드에 적용되고 있는 대표적인 VOF-type의 경계면 추적기법들의 이류성능을 평가하였다. 특히, 기존의 전통적인 VOF-type의 경계면 추적기법 및 이류계산에서 발생하는 수치확산을 최소화하기 위해 수치유속(numerical flux)을 제어하는 FCT 법의 효용성을 평가하고, 더불어 CIP 법을 활용한 자유수면 추적성능의 가능성을 고찰하였다. 그 결과, 본 연구에서 적용한 제한된 조건하에서는 수치확산 방지를 위해 수치확산방지 유속을 도입한 FCT-VOF 법이 가장 높은 경계면의 추적성능을 보였다. 본 연구에서 도출되는 결과는 다양한 수치해석코드에 적용되는 자유수면의 추적기법을 선택함에 있어서 중요한 기초자료로 활용될 것으로 기대된다.

스테레오 PIV 기법에 의한 임펠러 와류유동의 3차원 구조측정 (Identification on the Three-Dimensional Vortical Structures of Impeller Flow by a Multi-Plane Stereoscopic PIV Method)

  • 윤상열;김경천
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집E
    • /
    • pp.690-695
    • /
    • 2001
  • The three-dimensional spatial structures of impeller flow created by a six bladed Rushton turbine have identified based on the volumetric velocity information from multi-plane stereoscopic PIV measurements. A total of 10 planes with 2 mm space with a 50 mm by 64 mm size of the field of view were targeted. To reduce the depth of focus, we adopted an angle offset configuration which satisfied the Scheimpflug condition. The distortion compensation procedure was utilized during the in situ calibration. Phase-locked instantaneous data were ensemble averaged and interpolated in order to obtain mean 3-D, volumetric velocity fields on a 60 degree sector of a cylindrical ring volume enclosing the turbine blade. Using the equi-vorticity surface rendering, the spatial structure of the trailing vortices was clearly demonstrated. Detail flow characteristics of the radial jet reported in previous studies of mixer flows were easily identified.

  • PDF

플라잉 커패시터 멀티-레벨 인버터의 커패시터 전압 균형을 이루기 위한 캐리어 비교방식의 대칭 기법 (A Symmetric Carrier Technique of CRPWM for Voltage Balance Method of the Flying Capacitor Multi-level Inverter)

  • 전재현;김태진;강대욱;현동석
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권12호
    • /
    • pp.624-631
    • /
    • 2003
  • This paper presents a simple carrier symmetric method for the voltage balance of flying capacitors in FCMLI(flying capacitor multi-level inverter). To achieve the voltage balance of flying capacitors, the utilization of each carrier must be balanced during a half-cycle of the switching period such as PSPWM(Phase-Shifted PWM). However, the CRPWM(Carrier Redistribution PWM) method causes the fluctuation of flying capacitor voltages because the balanced utilization of carriers is not achieved. Moreover, it does not consider that the load current change has an influence on flying capacitor voltages by assuming that the current flows into the load. To overcome the drawbacks of CRPWM, it is modified by the technique that carriers of each band are disposed symmetrically at every fundamental period. Firstly, the CRPWM method is reviewed and the theory on voltage balance of flying capacitors is analyzed. The proposed method is introduced and is verified through the experiment result.

스테레오 PIV 기법에 의한 임펠러 와류유동의 3차원 구조측정 (Identification on the Three-Dimensional Vortical Structures of Impeller Flow by a Multi-Plane Stereoscopic PIV Method)

  • 윤상열;김경천
    • 대한기계학회논문집B
    • /
    • 제27권6호
    • /
    • pp.773-780
    • /
    • 2003
  • The three-dimensional spatial structures of impeller flow created by a six bladed Rushton turbine have identified based on the volumetric velocity information from multi-plane stereoscopic PIV measurements. A total of 10 planes with 2 mm space and a 50 mm by 64 mm size of the field of view were targeted. To reduce the depth of focus, we adopted an angle offset configuration which satisfied the Scheimpflug condition. The distortion compensation procedure was utilized during the in situ calibration. Phase-locked instantaneous data were ensemble averaged and interpolated in order to obtain mean 3-D. volumetric velocity fields on a 60 degree sector of a cylindrical ring volume enclosing the turbine blade. Using the equi-vorticity surface rendering, the spatial structure of the trailing vortices was clearly demonstrated. Detail flow characteristics of the radial jet reported in previous studies of mixer flows were easily identified.

Numerical Simulation of 3D Free-Surface Flows by Using CIP-based and FV-based Methods

  • Yang, Kyung-Kyu;Nam, Bo-Woo;Kim, Yong-Hwan
    • International Journal of Ocean System Engineering
    • /
    • 제1권3호
    • /
    • pp.136-143
    • /
    • 2011
  • In this paper, three-dimensional free-surface flows are simulated by using two different numerical methods, the constrained interpolation profile (CIP)-based and finite volume (FV)-based methods. In the CIP-based method, the governing equations are solved on stationary staggered Cartesian grids by a finite difference method, and an immersed boundary technique is applied to deal with wave-body interactions. In the FV-based method, the governing equations are solved by applying collocated finite volume discretization, and body-fitted meshes are used. A free-surface boundary is considered as the interface of the multi-phase flow with air and water, and a volumeof-fluid (VOF) approach is applied to trace the free surface. Among many variations of the VOF-type method, the tangent of hyperbola for interface capturing (THINC) and the compressive interface capturing scheme for arbitrary meshes (CICSAM) techniques are used in the CIP-based method and FV-based method, respectively. Numerical simulations have been carried out for dam-breaking and wave-body interaction problems. The computational results of the two methods are compared with experimental data and their differences are observed.