• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.17-23
• /
• 2000

The purpose of this paper is to evaluate the relative efficiency of Korean National Railroad (KNR). Railways can be seen as multi-product firms which produced both passenger and freight transportation services. For evaluating the operational efficiencies of 23 UIC (International Union of Railways) members including KNR we use data envelopment analysis (DEA) in which multiple inputs and multiple outputs can be handled explicitly.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.4
• /
• pp.23-32
• /
• 2022

Prototype UAMs are shown to us in the market. When the complete product is delivered to market, the efficiency of each UAMs can be compared by default. Before the complete product is shown to us, the comparative study on efficiency of UAMs is performed under the product cost estimation. The efficiency analysis result reveals that both of Lift & Cruise type and vectored thrust type show good efficiency at the initial stage of product. At the near terms stage, five years later from initial stage end, efficiency gets some change. Vectored thrust type of UAMs show best efficiency at the near term stage of product. Because UAMs will be used in urban area, Seoul is the place where the UAMs will be used first. The flying route from Seoul City Hall to Yongsan Park, National Assembly in Yeouido, and City Airport is no more than 10 km distance. For this short distance route, efficiency will make multi-rotor type UAM be prefered to other types. For long distance route or commuting route, life & cruise type and vectored thrust type of UAMs will be prefered on account of operational efficiency.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.174-179
• /
• 2011

We investigated the surface morphology changes of a lithium/sulfur battery using multi-walled canbon nanotube added sulfur electrode during charge-discharge cycling. The Li/S cell showed the first discharge capacity of 1286 mAh/g-S, which utilized is 71% of the theoretical value. It decreased to 328 mAh/g-S at the 100th cycle, which corresponds to about 19% utilization of the total sulfur in the cathode. The spherical lumps of the reaction product were observed on the surface of the sulfur electrode. This material was verified as lithium sulfide by X-ray diffraction measurement. The pores in the separator were filled with reaction product. Thus the diffusion of the $Li^+$ ion decreased, which resulted in the decreased capacity of the Li/S cell.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.235-242
• /
• 2016

The purpose of this study is an attempt to improve the functionality of a conventional Fused Deposition Modeling (FDM) process using the Automatic Tool Changer (ATC) to perform multimaterial production and post-processing. Hybrid-FDM means a fusion of an Additive Manufacturing process and grinding process using the ATC system. In order to enhance the potentiality of production capacity for multi-material fabrication and surface roughness improvement, two extrusion tools and one grinding tool system are suggested. A pneumatic chuck is attached on a moving platform in the XY axes plane and an extrusion head and grinding head are placed in a docking station, allowing for a quick changeover with each other. Therefore, the manufacturing lead time can be reduced efficiently for the fabrication of a product.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.87-90
• /
• 2009

Wireless Mesh Network(WMN) is wireless backbone networks technique which has ease of network configuration and cost of advantage. Recently, WNM released a new product, but most of existing research and technology analysis the performance through the simulation. This paper build the wireless mesh network testbed for actual situation. Testbed supports multi-channel multi-interface using bridge, the Wireless Distribution System and dynamic location-based routing protocol. This routing protocol strongly design against wireless interference using metric for link channel change and real distance. Then, the address of mesh clients assigned by the centralized address management server. Mesh clients is designed and implemented to manage network through Simple Network Management Protocol.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1169-1172
• /
• 2005

In this paper, we propose an improved anti-collision algorithm for multi tag interrogation in ubiquitous sensor network(USN) and show the result of simulation for multi tag interrogation in RFID systems. We have analyzed an EPC(Electronic Product Code) protocol which specifies the physical and logical requirements for a passive-backscatter Reader-Talk-First(RTF) RFID(Radio Frequency Identification) system operating in the $860MHz{\sim}960MHz$ frequency range. We have also designed and implemented the simulator of the RFID system based on the EPC protocol. Finally, we find that proposed algorithm works better than an existing algorithm.

• The International Journal of Costume Culture
• /
• v.9 no.1
• /
• pp.15-26
• /
• 2006

The purposes of this study were 1) to identify the dimension of perceived service quality of fashion retail stores in the basis of expanded marketing mix, 2) to investigate the effect of each dimension on long-term orientation/customer satisfaction, trust, commitment and WOM/repurchase intention) on perceived service quality. The questionnaires were administered to 333 women shopped in a fashion retail store in Gwang-ju city. Data were analyzed by using exploratory and confirmatory factor analysis, Cronbach' ${\alpha}$, and multi-regression analysis. The results were as follows: 1) The dimension of perceived service quality based on expanded marketing mix were classified as follow: product, price, place, promotion, people, physical evidence, process services. Long-term orientation was categorized into four factors: customer satisfaction, trust, commitment, WOM/repurchase intention. 2) For the effect of the perceived service quality by dimension, product, people, physical evidence, process services have significant effect on long-term orientation, while price, place, promotion services have not significant.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.4
• /
• pp.10-15
• /
• 2007

Taguchi methods have been used for a long time to improve the product quality and process performance of a manufacturing system, Few researchers have applied this methodology in laser beam cutting (LBC) of sheet metals and found the considerable improvement in cut qualities. In all experimental investigations of LBC so far, the objective was to optimize the single quality characteristic at a time. In this paper the simultaneous optimization of multiple quality characteristics such as Kerf width and material removal rate (MRR) during pulsed Nd:YAG LBC of thin sheet of magnetic material (high Silicon-steel) has been presented using Taguchi's quality loss function. The results show the considerable improvement in multiple S/N ratio as compared to initial cutting condition. Also, the comparison of results from single and multi-objective optimization have been presented and it was found that the loss in quality is always possible shifting from single quality to multiple quality optimization.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.280-287
• /
• 2001

There have been some studies about hybrid production system, which integrate push system and pull system. Most of them are based on the simple production system considering one product line. Though there are many studies about hybrid production system, it\`s not practical to implement them for real factory, because most of them did not consider various factors about real factory. On this study we designed hybrid production system considering some factor - one is automatic kanban generation, the other is dispatching rule for Multi-tasking worker, and the last one is the priority of kanban. At last, We give simulation results fur a real company, which produce various cameras in Korea.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.39-43
• /
• 2016

Most of automobile parts manufactured through sheet metal forming are mass-produced by using press mold. In recent years, automation and speeding up of press lines have been expanding to maximize product productivity using a press die. The proportion of the moving time in the press line is high, and therefore requires high-speed and automated equipment for the moving process. In this paper, to provide the double-moving system can be the moving time reduction and increased productivity. Developed transport system consists of the material supply, the material feeding device and the PLC controller and the devices are positioned between each of the pressing process. In this paper, the double-moving system including developed units using a multi-axial single-acting through this reduced the C/T(cycle time) and improved the productivity.