• 조명전기설비학회논문지
• /
• 제26권10호
• /
• pp.60-71
• /
• 2012

This paper proposes a new design and implementation of multi-protocol IED for networked control system of multi-induction motor in industrial fields. The experimental multi-induction motor based multi-protocol IED of Modbus/LonTalks/TCP/IP module is designed and fabricated. This article addresses issues in architecture of LonWorks/Ethernet sever, embedded processors architecture for converting Modbus protocol to LonTalks protocol, integrating preconfigured software, and Internet technologies. It is also verified that the multi-induction motor control and monitoring system using LonWorks/Ethernet server have available, interoperable, reliable performance characteristics from the experimental results, especially, the seamless integration of TCP/IP networks with control networks allows access to any control point from anywhere. Thus, the results provide available technical data for remote distributed motor control system of industrial field or building microgrid with LonWorks BAS.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권4호
• /
• pp.78-85
• /
• 1995

This paper covers stability and stabilization of Multi-Excited Induction Motor used in numberous electric equipment system of industrial field. The induction motor with multi-excitation has tow sets of three-phase system : One is connected to the AC source to supply most power required at the load, and the other is to the inverter for variable frequency and/or magnitude of voltage. The conventional induction motor is operated under single excitation mode only, that is called induction mode. But in multi-excited induction motor both the induction mode and the synchronous mode are possible, and the proposed multi-excited induction motor can be driven as a synchronous motor by the extra three-phase input. At the synchronous mode the efficiency is improved so higher than that at induction mode or conventional induction motor. The rating of the inverter used for speed control of numberous electric equipment system can be reduced upto one-tenth of that for conventional induction motor. Also the cost and maintenance fee of multi-excited induction motor can be reduced compared to any other motor.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.17-22
• /
• 2002

Endoscopes for industrial and medical fields are expected to have multi degree-of-freedom (DOF) motions. A multi-DOF ultrasonic motor we developed consists of a spherical rotor and a bar-shaped stator, and the rotor rotates around three perpendicular axes using three natural vibration modes of the stator. In this study, a multi-DOF unilateral master-slave system for active endoscope using the multi-DOF ultrasonic motor is developed. The configurations of master and slave arms for active endoscope are similar, so that an operator can easily handle the master-slave system. First, driving characteristics of the multi-DOF ultrasonic motor are measured in order to design the slave arm and its controller. Next, the master arm and the slave arm are designed. Then, the unilateral feedback controller for the master-slave system is developed. Finally, the motion control tests of rotor are conducted. As a result, the possibility of the endoscope is confirmed.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.109-115
• /
• 2005

이 논문은 자동차에서 제어 네트워크로 이미 신뢰성이 확인된 CAN(Controller Area Network) 필드버스를 산업계 복수전동기 제어에 적용하기 위하여 지능형 제어모듈로 CAN이 내장된 DSP2812 프로세서를 이용하여 제어 및 모니터링기술을 개발하였다. 산업계에 광범위하게 사용되고 있는 유도전동기를 대상으로 여러 대의 유도전동기를 제어하기 위한 제어 알고리즘과 CAN 기반제어네트워크 구축방법을 개발하였다. 이 시스템 성능을 평가하기 위하여 2대의 유도전동기 인버터 구동시스템에 적용하여 CAN 기반 네트워크 제어 실험을 수행하였다. 그 결과 광범위한 속도와 정역회전에서 실시간 네트워크 기반 제어성능을 확인하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.81-87
• /
• 2005

이 논문은 자동차에서 제어 네트워크로 이미 신뢰성이 확인된 CAN(Controller Area Network) 필드버스를 산업계 복수전동기 제어에 적용하기 위하여 지능형 제어모듈로 CAN 이 내장된 DSP2812 프로세서를 이용하여 제어 및 모니터링기술을 개발하였다. 산업계에 광범위하게 사용되고 있는 유도전동기를 대상으로 여러 대의 유도전동기를 제어하기 위한 제어 알고리즘과 CAN기반제어네트워크 구축방법을 개발하였다. 이 시스템 성능을 평가하기 위하여 2대의 유도전동기 인버터 구동시스템에 적용하여 CAN 기반 네트워크 제어 실험을 수행하였다. 그 결과 광범위한 속도와 정역회전에서 실시간 네트워크 기반 제어성능을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.90-96
• /
• 2013

As the need of electric motor is increased rapidly throughout our society, the various application fields are created and the service market called robot gets expanded as well as the existing industrial market. Out of those, the joint systems such as humanoid that is servo actuator for position control or all fields which require multi-degree of freedom (multi-DOF) require the development of innovative actuator. It is multi-DOF spherical motor that can replace the existing system in multi-DOF operating system. But, multi-DOF spherical motor that has been researched up to date is at the stage which is insufficient in performance or mechanical practicality yet. Thus, first of all the research results and limitation of the previously-researched guide frame-type spherical motors were analyzed and then the feature of double air-gap spherical motor which was devised to complement that was studied. The double air-gap multi-DOF spherical motor is very suitable spherical motor for system applying which requires the multi-DOF operation due to its simple structure that does not require other guide frame as well as performance improvement due to its special shape which has two air-gaps. So, the validity of the study was verified by designing and producing it with 3D-FEM through the exclusive jig for multi-DOF spherical motor.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.5-10
• /
• 2012

The parking brake is one of the essential units embedded in track driving motor for forward and backward motion of an excavator. It is composed of multi-friction discs. When the hydraulic motor stops, the multi-friction discs closely stick to the facing discs by acting of multi-spring forces. So, the friction forces generate the braking force by compressing the cylinder barrel of hydraulic motor. In this study, we combined the multi-friction discs to two kinds of spring which have different spring force, and the maximum torque measured at the rotational starting point of hydraulic motor through gradually increasing the rotational torque of load side hydraulic motor by use of 1 and 2 sheets of friction plates. And, under this experimental condition, the maximum coefficient of static friction and the characteristics of paper friction sheet were analyzed. The obtained experimental results will be applied to the design of parking brake system for producing large size excavator in the 85-ton weight class.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.81-86
• /
• 2019

According to the needs of many users, motor pumps have been steadily developed and widely used in many industries where fluids are used. Motor pumps are used in a variety of environments, degrading quality and performance. It is becoming important to monitor the condition of motor pumps in order to maintain system performance and increase efficiency. This paper presents the method for effectively monitoring the condition of motor pumps. The designed MMI controller receives the collected data through data logging and output and controls the motor pump with touch screen. Implementing a Wi-Fi monitoring system and SCADA monitoring system based on Ethernet and RS485, user can monitor even if the user is far from the MMI controller without time and space limitation. In addition, by implementing a voice output system, the user can immediately recognize the situation through the sound. Therefore, through the proposed method, multi-monitoring system solves the cause of breakdowns and degradation of motor-pump and gives the possibility of commercialization by providing the convenience of maintenance to users.

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.224-234
• /
• 2008

Multi-phase machines can be used in variable speed drives. Their applications include electric ship propulsion, 'more-electric aircraft' and traction applications, electric vehicles, and hybrid electric vehicles. Multi-phase machines enable independent control of a few numbers of machines that are connected in series in a particular manner with their supply being fed from a single voltage source inverter(VSI). The idea was first implemented for a five-phase series-connected two-motor drive system, but is now applicable to any number of phases more than or equal to five-phase. The number of series-connected machines is a function of the phase number of VSI. Theoretical and simulation studies have already been reported for number of multi-phase multi-motor drive configurations of series-connection type. Variable speed induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, information concerning the rotor speed is extracted from measured stator currents and voltages at motor terminals. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. This paper analyses operation of an MRAS estimator based sensorless control of a vector controlled series-connected two-motor five-phase drive system with current control in the stationary reference frame. Results, obtained with fixed-voltage, fixed-frequency supply, and hysteresis current control are presented for various operating conditions on the basis of simulation results. The purpose of this paper is to report the first ever simulation results on a sensorless control of a five-phase two-motor series-connected drive system. The operating principle is given followed by a description of the sensorless technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.95-98
• /
• 2002

This paper presents a study on DSP(TMS320F240) controller design for multi-axes transportation system using BLDC servo motor. This BLDC servo motor controller was realized with DSP(Digital Signal Processor) and IPM (Intelligent Power Module). The multi-axes transportation system needs torque, speed, position control of servo motor for variable action. This paper implements those servo control with vector control and space vector modulation technique. As CPU of controller DSP(TMS320F240) is adopted because, it has PWM(Pulse Width Modulation) waveform generator, A/D(Analog to Digital) converter, SPI(Serial Peripheral Interface) port and input/output port etc. The controller of multi-axes transportation system consists of 3-level hierarchy structure that main host PC manages three sub DSP system which transfer downword command and are monitoring the states of end servo controllers. Each sub DSP system operates eight BLDC servo controllers which control BLDC servo motor using DSP and IPM Between host system and middle digital signal processor communicate with RS-422, between main processor and controller communicate with SPI port.