• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.443-453
• /
• 2013

하이브리드 실험은 수치해석 모형과 물리적 부분구조 모형사이의 상호작용을 통하여 구조물의 거동을 예측하는 실험법이다. 본 연구에서는 지진하중 재하 시 1경간 2층 강 뼈대 구조물에 대한 다자유도 하이브리드 실험을 수행하고 유효성을 확보하는데 그 목적이 있다. 이를 위해 전용 하이브리드 수치해석 프로그램인 FEAPH을 개발하였으며, 최적화된 시스템을 구축하였다. FEAPH은 고정 반복법(Fixed iteration)과 병렬화(Parallelization) 기법을 적용하여 순차적 해석에서 발생되는 비효율적 연산을 개선하였다. 또한, 종전에 데이터 통신과 부분구조물과 해석프로그램간의 인터페이스를 간략화하여 하이브리드 시스템 구성을 최적화 하였다. 그 결과, 입력 가진시간(30초) 대비 약 10%의 실험시간이 소요되었다. 시스템의 신뢰성을 검증하고 선형실험과 강 뼈대 구조물의 동적거동을 예측하기 위해 비선형 실험을 수행하였으며 수치해석과의 변위응답이력은 거의 일치 하였다. 그러나 최대변위에 대한 응답은 다소 차이를 보였으며, 이는 재료 비선형성에 대한 해석상의 오차와 영구변형에 의해 발생한 것으로 판단된다. 따라서 적절한 재료 비선형 모델과 알고리즘의 개선이 이루어지면, 실시간 하이브리드 시스템은 구조물의 동적거동을 예측하는데 유용하게 활용될 것이며, 추후 진동대 실험을 대체할 수 있는 효과적인 실험 방법이 될 것으로 판단된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.428-435
• /
• 2011

In general, thickness of the sublayers under track is designed based on concept of vertical soil reaction value or vertical stiffness. However, this design method cannot take consideration into soil-track interaction under repetitive load, traffic condition and velocity of the train. Furthermore, the reinforced roadbed soils experience complex behavior that cannot be explained by conventional stress-strain relation expressed as soil reaction value k. The reinforced roadbed soils also can produce cumulative permanent deformation under repetitive load caused by train. Therefore new design method for the sublayers under track must be developed that can consider both elastic modulus and permanent deformation. In this study, a new design concept, a rule-of-thumb, is proposed as the form of design monograph that is developed using elastic multi-layer and finite element programs by analyzing stress and deformation in the sublayers with changing the thickness and elastic modulus of the sublayers and also using data obtained from repetitive triaxial test. This new design concept can be applied to design of the reinforced roadbed before developing full version of design methodology that can consider MGT, axial load and the material properties of the layers. The new design monograph allows the user to design the thickness of the reinforced roadbed based on permanent deformation, elastic modulus and MGT.

• 영어어문교육
• /
• 제11권4호
• /
• pp.365-389
• /
• 2005

The purpose of this study is to present the task model that is the most effective in English language methodology based on the investigation of task-based performance in Korean EFL classroom practice. The subjects were 538 high school students and 126 high school teachers, each of whom had common experiences using the materials of task-based activities for more than one year. To analyze the data, the program SPSS WIN 11.0 including frequency distribution and chi-square analysis was used. The results of the questionnaire analysis showed that both teachers and students had a comparatively high level of satisfaction in task rationale, but that they had some mixed responses in the fields of input data, settings, and activity types. To conclude, a few suggestions are made to provide some meaningful considerations for the EFL teachers and material developers: a) task goals and rationale that encourage the learner's positive motivation; b) authenticity of input data based on the real-world context; c) collaborative learning environment that enhances communicative interaction; d) proportional representation of the creative problem-solving activities related to discussions and decision-making processes; e) systematic introduction of integrated language skills. It also suggests that the multi-lateral task model, which has some positive assets compared to previous task models, be newly introduced and applied to the second language learning classrooms.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.402.1-402.1
• /
• 2014

Photonic force microscopy (PFM) is an optical tweezers-based scanning probe microscopy, which measures the forces in the range of fN to pN. The low stiffness leads proper to measure single molecular interaction. We introduce a novel photonic force microscopy to stably map various chemical properties as well as topographic information, utilizing weak molecular bond between probe and object's surface. First, we installed stable optical tweezers instrument, where an IR laser with 1064 nm wavelength was used as trapping source to reduce damage to biological sample. To manipulate trapped material, electric driven two-axis mirrors were used for x, y directional probe scanning and a piezo stage for z directional probe scanning. For resolution test, probe scans with vertical direction repeatedly at the same lateral position, where the vertical resolution is ~25 nm. To obtain the topography of surface which is etched glass, trapped bead scans 3-dimensionally and measures the contact position in each cycle. To acquire the chemical mapping, we design the DNA oligonucleotide pairs combining as a zipping structure, where one is attached at the surface of bead and other is arranged on surface. We measured the rupture force of molecular bonding to investigate chemical properties on the surface with various loading rate. We expect this system can realize a high-resolution multi-functional imaging technique able to acquire topographic map of objects and to distinguish difference of chemical properties between these objects simultaneously.

• 방송공학회논문지
• /
• 제13권5호
• /
• pp.574-585
• /
• 2008

입체음향은 가상환경 시스템에서 중요한 부분을 차지하고, 청각 재생과 인간-컴퓨터 상호작용에서 점점 더 각광받고 있다. 본 논문은 가상환경을 위한 새로운 실시간 3차원 입체음향 재생 시스템을 제안한다. 먼저 가상공간에서의 임펄스 응답을 계산하는 방법을 제안한다. 입체음향과 관련된 가상공간 정보를 전달하기 위해서, 가상 환경을 위한 재질 정보를 포함하는 Enhanced DXF 파일 형식을 제안한다. 그리고 멀티채널 사운드 패닝 시스템을 구현하였다. 컴퓨터 환경에서 실험하여 제안한 방법의 유용성을 보여준다.

• Steel and Composite Structures
• /
• 제27권2호
• /
• pp.229-242
• /
• 2018

High strength steel is widely used in industrial applications to improve the load-bearing capacity and reduce the overall weight and cost. To take advantage of the benefits of this type of steel in construction, an innovative hybrid fabricated member consisting of high strength steel tubes welded to mild steel plates has recently been developed. Component-scale uniaxial and multiaxial cyclic experiments have been conducted with simultaneous constant or varying axial compression loads using a multi-axial substructure testing facility. The structural interaction of high strength steel tubes with mild steel plates is investigated in terms of member capacity, strength and stiffness deterioration and the development of plastic hinges. The deterioration parameters of hybrid specimens are calibrated and compared against those of conventional steel specimens. Effect of varying axial force and loading direction on the hysteretic deterioration model, failure modes and axial shortening is also studied. Plate and tube elements in hybrid members interact such that the high strength steel is kept within its ultimate strain range to prevent sudden fracture due to its low ultimate to yield strain ratio while the ductile performance of plate governs the global failure mechanism. High strength material also significantly reduces the axial shortening in columns which prevents undesirable frame deformations.

• 한국콘텐츠학회논문지
• /
• 제20권3호
• /
• pp.452-461
• /
• 2020

본 연구는 모바일 테크놀로지를 통해 활용되는 학습 자료에 대해 학습자가 어떻게 인식하는지를 확인하는 목적을 지닌다. 이를 위해 다차원 척도 분석법을 활용하여 학습자가 어떻게 모바일 학습 자료의 유형을 구분하는지에 대한 인식을 탐색하였다. 또한, 의미 변별 척도법을 통해 학습자들이 기존 전통적인 학습 자료와 비교하여 볼 때, 모바일 학습 자료가 어떠한 특성을 지니고 있는지를 확인하였다. 연구 결과, 모바일 테크놀로지를 통해 활용되는 학습 자료의 유형에 대해 학습자는 '콘텐츠와의 상호작용성'과 '실재감' 차원으로 구분하는 것으로 나타났다. 학습자들은 모바일 학습 자료가 기존 전통적 학습 자료보다 '활동적', '학습자 중심적', '다 감각적', '흥미를 유발하는' 특성을 지닌 것으로 인식하고 있음을 확인하였다. 본 연구는 다양한 모바일 학습 자료의 특성을 학습자 인식을 통해 경험적이고 종합적으로 확인한 의미를 지닌다.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.44-50
• /
• 2009

High-pressured jetting is now widely used in the advanced cutting processes of polymers, metals, glass, ceramics and composite materials because of some advantages such as heatless and non-contacting cutting. Similarly to the focused laser beam machining, it is well known as a type of high-density energy processes. High-pressured jetting is going to be developed not only to minimize the cutting line width but also to achieve the short cutting time as soon as possible. However, the interaction behavior between a work piece and high-velocity abrasive particles during the high-pressured jet cutting makes the impact mechanism even more complicated. Conventional high-pressured jetting is still difficult to apply to precision cutting of micro-scaled thin work piece such as thin metal sheets, thin ceramic substrates, thin glass plates and TMM (Thin multi-layered materials). In this paper, we proposed the advanced high-pressured jetting technology by introducing a new abrasives supplying method and investigated the optimal process conditions of the cutting pressure, the cutting velocity and SOD (Standoff distance).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.75-85
• /
• 2006

In recent geotechnical engineering, geothermal approach has been on the horizon to deal with geoenvironmental issues, freezing and thawing problems, and seepage phenomenon in dams and embankments. In this study, geothermal characteristic through inner body of dams and its influence on the seepage flow were experimented by lab test and field instrumentation. Also, one of up-to-date temperature monitoring technique, called as multi-channel thermal line sensing, was evaluated its availability. As a result of lab test, it is found that the seepage flow has influence on the geothermal characteristic and a potential of finding phreatic line and seepage fluctuation could be possible by continuous temperature monitoring using thermal line sensing skills. These kine of geothermal information could be available to the modelling of water geo-structure interaction. Out of short-term field tests, clear water table and temperature distribution of a dam were easily found through temperature monitoring in holes located near a reservoir and holes within a depth of constant temperature layer. However, it is also found that the geothermal flow and finding seepage line could not be easily understandable through multi-channel temperature monitoring because of the existence of constant temperature field, thermal conductivity of soils and rocks, and unsaturated characteristics of geo-material. In this case, long-term geothermal monitoring is recommended to find sudden fluctuation of seepage line and amount of leakage.

• 한국전기전자재료학회논문지
• /
• 제31권7호
• /
• pp.521-526
• /
• 2018

In particular, gas sensors require characteristics such as high speed, sensitivity, and selectivity. In this study, we fabricated a $NO_X$ gas sensor by using a multi-walled carbon nanotube (MWCNT)/zinc oxide (ZnO) composite film. The fabricated MWCNT/ZnO gas sensor was then treated by a $450^{\circ}C$ temperature process to increase its detection sensitivity for NOx gas. We compared the detection characteristics of a ZnO film gas sensor, MWCNT film gas sensor, and the MWCNT/ZnO composited film gas sensor with and without the heat-treatment process. The fabricated gas sensors were used to detect $NO_X$ gas at different concentrations. The gas sensor absorbed $NO_X$ gas molecules, exhibiting increased sensitivity. The sensitivity of the gas sensor was increased by increasing the gas concentration. Additionally, while changing the temperature inside the chamber for the MWCNT/ZnO composite film gas sensor, we obtained its sensitivity for detecting $NO_X$ gas. Compared with ZnO, the MWCNT film gas sensor is excellent for detecting $NO_X$ gas. From the experimental results, we confirmed the enhanced gas sensor sensing mechanism. The increased effect by electronic interaction between the MWCNT and ZnO films contributes to the improved sensor performance.