• Journal of Communications and Networks
• /
• 제10권1호
• /
• pp.28-37
• /
• 2008

In this paper, we investigate the problem of minimizing the average transmission power of users while guaranteeing the average delay constraints in time-varying uplink channels. We design a scheduler that selects a user for transmission and determines the transmission rate of the selected user based on the channel and backlog information of users. Since it requires prohibitively high computation complexity to determine an optimal scheduler for multi-user systems, we propose a low-complexity scheduling scheme that can achieve near-optimal performance. In this scheme, we reduce the complexity by decomposing the multiuser problem into multiple individual user problems. We arrange the probability of selecting each user such that it can be determined only by the information of the corresponding user and then optimize the transmission rate of each user independently. We solve the user problem by using a dynamic programming approach and analyze the upper and lower bounds of average transmission power and average delay, respectively. In addition, we investigate the effects of the user selection algorithm on the performance for different channel models. We show that a channel-adaptive user selection algorithm can improve the energy efficiency under uncorrelated channels but the gain is obtainable only for loose delay requirements in the case of correlated channels. Based on this, we propose a user selection algorithm that adapts itself to both the channel condition and the backlog level, which turns out to be energy-efficient over wide range of delay requirement regardless of the channel model.

• 한국정보과학회논문지:시스템및이론
• /
• 제35권7호
• /
• pp.354-360
• /
• 2008

최신의 마이크로프로세서 설계에서는 전력 관련 문제들이 중요한 고려사항이 되었다. 온-칩(On-chip) 온도 상승은 이와 관련하여 중요한 요소로 부각되었다. 이를 적절하게 처리하지 않을 경우 냉각 비용과 칩 신뢰성에 부정적인 결과를 초래한다. 이 논문에서 우리는 시간적/공간적인 핫 스폿(Hot spot) 완화를 위한 설계들과 열 시간 상수, 작업부하 변동, 마이크로프로세서의 전력 분배 사이의 보편적인 상충관계(Trade off)들을 조사한다. 우리의 방안은 작업부하의 실행위치/순서를 변경하고 동시실행 스레드의 수를 조절하여 시스템의 공간 및 시간적인 열 틈새(Heat slack)에 영향을 줌으로써, 운영체계(OS)와 이미 시스템에 존재하는 하드웨어의 지원만으로 적절한 시간제한내에 작업부하를 조절함으로써 온-칩 온도를 낮출 수 있다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.39-46
• /
• 2008

Asymmetric glass lens core for portable projection optic system was designed and simulated. And it was machined by newly developed non-rotational ultra precision grinding method. With the designed lens data which optimized for multi-collimation, we generated the we core surface data. Mold pressing conditions analyzed by FEM. In the machining process, ground profile errors were compensated based on measured data, minimized feed rate and depth of cut. The deviations of machined core profile were acceptable level for glass mold press. Mold pressed glass array lens was coated with $SiO_2\;and\;Ta_2O_5$ for anti-reflection.

• 소성∙가공
• /
• 제25권3호
• /
• pp.182-188
• /
• 2016

Flexibly-reconfigurable roll forming (FRRF) is a novel sheet metal forming technology conducive to producing multi-curvature surfaces by controlling the strain distribution along longitudinal direction. In FRRF, a sheet metal is shaped into the desired curvature by using reconfigurable rollers and gaps between the rollers. As FRRF technology and equipment are under development, a simulation model corresponding to the physical FRRF would aid in investigating how the shape of a sheet varies with input parameters. To facilitate the investigation, the current study exploits regression analysis to construct a predictive model for the longitudinal curvature of the sheet. Variables considered as input parameters are sheet compression ratio, radius of curvature in the transverse direction, and initial blank width. Samples were generated by a three-level, three-factor full factorial design, and both convex and saddle curvatures are represented by a quadratic regression model with two-factor interactions. The fitted quadratic equations were verified numerically with R-squared values and root mean square errors.

• 소성∙가공
• /
• 제26권6호
• /
• pp.341-347
• /
• 2017

Flexibly-reconfigurable roll forming (FRRF) is a novel sheet metal forming technology conducive to produce multi-curvature surfaces by controlling strain distribution along longitudinal direction. Reconfigurable rollers could be arranged to implement a kind of punch die set. By utilizing these reconfigurable rollers, desired curved surface can be formed. In FRRF process, three-dimensional surface is formed from two-dimensional curve. Thus, it is difficult to predict the forming result. In this study, a regression analysis was suggested to construct a predictive model for a longitudinal curvature of FRRF process. To facilitate investigation, input parameters affecting the longitudinal curvature of FRRF were determined as maximum compression value, curvature radius in the transverse direction, and initial blank width. Three-factor three-level full factorial experimental design was utilized and 27 experiments using FRRF apparatus were performed to obtain sample data of the regression model. Regression analysis was carried out using experimental results as sample data. The model used for regression analysis was a quadratic nonlinear regression model. Determination factor and root mean square root error were calculated to confirm the conformity of this model. Through goodness of fit test, this regression predictive model was verified.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (2)
• /
• pp.217-219
• /
• 2005

최근 들어 무선 인터넷 및 모바일 기술이 급속한 발달을 이루면서 이동 객체의 위치에 기반 한 많은 서비스들이 개발되고 있다. 이 서비스에 사용되는 않은 어플리케이션들은 비교적 용량이 큰 공간 정보를 사용하여 최근에는 기존 디스크 기반 데이터베이스 관리 시스템이 제공할 수 있는 처리 속도보다 더욱 빠른 트랜잭션 처리를 요구하고 있다. 따라서 공간 데이터와 같은 대용량 데이터의 효율적인 처리와 폭주 하는 여러 사용자들에게 빠른 응답시간을 제공하여 주는 공간 DBMS가 요구되고 있다. 기존 디스크 기반의 공간 DBMS는 공간데이터와 같은 대용량의 데이터 관리가 가능하지만, 빠른 응답속도를 요구하는 여러 어플리케이션을 지원하기에는 무리가 있다. 반면에 메인 메모리 기반의 공간 DBMS는 불필요한 디스크 I/O를 없앰으로써 더욱 빠른 트랜잭션 처리를 지원하지만, 메인 메모리의 저장 한계로 대용량 처리에는 한계가 있다. 이러한 이유로 디스크 공간 DBMS의 장점과 메인 메모리 공간 DBMS의 장점으로 이루어진 다중레벨 공간 DBMS를 제안한다. 다중레벨 공간 DBMS는 디스크 기반의 공간 DBMS인 GMS시스템에 메인 메모리 데이터베이스와 그와 관련된 여러 컴포넌트들을 추가하여 개발 하였다. 제안된 시스템은 디스크 데이터베이스 기반의 대용량 데이터의 효율적인 관리와 메모리 데이터베이스 기반의 빠른 트랜잭션 처리를 보장한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.356-368
• /
• 2013

The Korea Aerospace Research Institute plans to launch a lunar module by 2025, and so is carrying out a preliminary study. Landing stability on the lunar surface is a key design factor of a lunar module. In this paper, a 1/6 scale model of a lunar module is investigated, for its landing stability on non-level surfaces. The lunar module has four tripod legs, with aluminum honeycomb shock absorbers in each leg strut. ADAMS$^{TM}$, the most widely used multi-body dynamics and motion analysis software, is used to simulate the module's lunar landing. Three types of dampers in the struts (rigid, viscous, and aluminum honeycomb dampers), and two types of lunar surfaces (rigid and elastic) are considered. The Sforce function is adopted, to model the aluminum honeycomb dampers. Details on the modeling and analysis of the landing stability of the 1/6 scale lunar module and the simulation results are provided in this paper.

• 한국통신학회논문지
• /
• 제29권3A호
• /
• pp.318-323
• /
• 2004

본 논문은 시간 제약 조건 하에서의 모듈 선택 재사용을 이용한 전력 감소 스케줄링을 제안한다. 일반적인 상위 수준 합성에서의 스케줄링은 실제적인 라이브러리의 복잡한 재사용을 허용하지 않는다. 반면 제안한 전력 감소 스케줄링에서는 주어진 사용자 정의 모듈을 실제적인 RT 라이브러리 모듈 재사용과 공유된 자원에서의 스위치 활동의 자원 공유함으로써 설계의 생산성 및 소비 전력을 줄이는데 효율적으로 접근할 수 있다. 또한 비교 실험에서 스케줄링 기법인 체이닝과 멀티사이클링을 이용해 다양한 상위 레벨 벤치마크의 환경에서 최적의 스케줄링의 결과를 얻는다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2207-2212
• /
• 2008

The next generation of Korean high-speed train under development will be designed for the maximum operating speed of 350km/h and maximum speed of 400km/h. This high-speed operation may cause the noise and vibration problems around tunnel exit due to the higher micro-pressure wave than present level. In this study, the nose shape optimization was conducted for the countermeasure against these problems. Axi-symmetric solver was used for numerical simulation, and response surface was used for efficiency of optimization process. Also the multi-step optimization was conducted to find out more accurate optimal shape. Through these analysis and optimization, it was found out that the optimal nose shapes for minimization of micro-pressure wave are definitely different along the nose length variation. And the mechanism of micro-pressure wave reduction was closely investigated by the analysis of generation process of compression wave in tunnel. The results are expected to be used as design guideline for performance improvement of the next generatin of Korean high-speed train.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.1022-1035
• /
• 2016

A double-tube once-through steam generator (DOTSG) consisting of an outer straight tube and an inner helical tube is studied in this work. First, the structure of the DOTSG is optimized by considering two different objective functions. The tube length and the total pressure drop are considered as the first and second objective functions, respectively. Because the DOTSG is divided into the subcooled, boiling, and superheated sections according to the different secondary fluid states, the pitches in the three sections are defined as the optimization variables. A multi-objective optimization model is established and solved by particle swarm optimization. The optimization pitch is small in the subcooled region and superheated region, and large in the boiling region. Considering the availability of the optimum structure at power levels below 100% full power, we propose a new operating scheme that can fix the boundaries between the three heat-transfer sections. The operation scheme is proposed on the basis of data for full power, and the operation parameters are calculated at low power level. The primary inlet and outlet temperatures, as well as flow rate and secondary outlet temperature are changed according to the operation procedure.