• Journal of computational fluids engineering
• /
• v.14 no.1
• /
• pp.18-23
• /
• 2009

A novel adaptive mesh refinement(AMR) strategy based on the Moment-of-Fluid(MOF) method for volume-tracking dynamic interface computation is presented. The Moment-of-Fluid method is a new interface reconstruction and volume advection method using volume fraction as well as material centroid. The adaptive mesh refinement is performed based on the error indicator, the deviation of the actual centroid obtained by interface reconstruction from the reference centroids given by moment advection process. Using the AMR-MOF method, the accuracy of volume-tracking computation with evolving interfaces is improved significantly compared to other published results.

• Journal of electromagnetic engineering and science
• /
• v.4 no.2
• /
• pp.56-62
• /
• 2004

We present a multi-Gbit/s digital I/O interface based on RF-modulation and capacitive-coupling over an impedance matched transmission line. The RF-interconnect(RFI) can greatly reduce the digital switching noise and eliminate the dc power dissipation over the channel. It also enables reduced signal amplitude(as low as 200 ㎷) with enhanced data rate and affordable circuit overhead. This paper addresses the system advantages and implementation issues of RFI. A prototype on-chip RFI transceiver is implemented in 0.18-${\mu}{\textrm}{m}$ CMOS. It demonstrates a maximum data rate of 2.2 Gbit/s via 10.5-㎓ RF-modulation. The RFI can be very instrumental for future high-speed inter- and intra-ULSI data links.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.110-113
• /
• 2003

In this paper, the multi-channel high speed data acquisition system is implemented. This high speed signal processing system for 3-D image display is applicable to the manipulation of a medical image processing, multimedia data and various fields of digital image processing. In order to convert the analog signal into digital one, A/D conversion circuit is designed. PCI interface method is designed and implemented, which is capable of transmission a large amount of data to computer. In order to, especially, channel extendibility of images acquisition, bus communication method is selected. By using this bus method, we can interface each module effectively. In this paper, 32-channel A/D conversion and PCI interface system for 3-dimensional and real-time display of the retina image is developed. The 32-channel image acquisition system and high speed data transmission system developed in this paper is applicable to not only medical image processing as 3-D representation of retina image but also various fields of industrial image processing in which the multi-point realtime image acquisition system is needed.

• Journal of Computing Science and Engineering
• /
• v.7 no.2
• /
• pp.132-138
• /
• 2013

Multi-modal techniques have received increasing interest in the neuroscientific and brain computer interface (BCI) communities in recent times. Two aspects of multi-modal imaging for BCI will be reviewed. First, the use of recordings of multiple subjects to help find subject-independent BCI classifiers is considered. Then, multi-modal neuroimaging methods involving combined electroencephalogram and near-infrared spectroscopy measurements are discussed, which can help achieve enhanced and robust BCI performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.18-38
• /
• 2017

Infrastructure-as-a-Service (IaaS) clouds provide infrastructure as a pool of virtual resources, and the public IaaS clouds, e.g. Amazon Web Service (AWS) and private IaaS cloud toolkits, e.g. OpenStack, CloudStack, etc. provide their own application programming interfaces (APIs) for managing the cloud resources they offer. The heterogeneity of the APIs, however, makes it difficult to access and use the multiple cloud services concurrently and collectively. In this paper, we explore previous efforts to solve this problem and present our own implementation of an integrated cloud API, which can make it possible to access and use multiple clouds collectively in a uniform way. The implemented API provides a RESTful access and hides underlying cloud infrastructures from users or applications. We show the implementation details of the integrated API and performance evaluation of it comparing the proprietary APIs based on our cloud testbed. From the evaluation results, we could conclude that the overhead imposed by our interface is negligibly small and can be successfully used for multi-cloud access.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1168-1174
• /
• 2011

The IEFT has recently considered to provide flow mobility for multi-interface MN in the PMIPv6. In this paper, we proposed an extended BCE of the LMA and a novel mechanism for flow mobility of PMIPv6. With our proposal BCE and mechanism, the LMA can route packets by the flow label and hence packet loss during handover can be eliminated. Also, to validate our flow mobility scheme, we designed and implemented the PMIPv6 packet data unit and database of both LMA and MAG, and configured a testbed for flow mobility in PMIPv6. And the support of flow mobility was configured with the network connectivity test in our testbed. According to the Wireshark results, we can see that our proposed scheme works wells for flow mobility in PMIPv6.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.99-107
• /
• 2008

The COMS is a kind of geostationary multi-functional satellites with three different mission objectives. Two of them aim at earth observation and the COMS has two optical payloads according to those missions. The payloads are composed of a meteo imager and an ocean color imager, and their inherent characteristics require optimal interface design for their performance to be concurrently achieved. Therefore, various kinds of constraints are considered in their component accommodation on the COMS platform. This paper shows a general overview of the optical payload accommodation design and describes the design consideration to achieve the optimized performance from thermal and mechanical point of view.

• Journal of Digital Convergence
• /
• v.4 no.1
• /
• pp.31-41
• /
• 2006

This article introduces developing trends of an 'Ubiquitous Interface' as an access method for use of various network resources, such as public wireless networks and un-licensed wireless networks in ubiquitous sensor network environments, without troublesome settings or operations by users. 'Ubiquitous Interface' is a relatively wide sense meaning not only physical interface of specified device or between processors, but anything method for access USN. These 'Ubiquitous Interface' able to provide seamless services that adapt autonomously to the user's movements and changes in the state of wireless resources. Recently, strongly recommended current technologies are RFID, NFC, Multi-mode mobile terminal, UMA mobile terminal and Wearable computer as a future ubiquitous interface. These technologies are have to have flexibility and multiple physical communication channels for seamless service hand over and serve easy connection at huge USN to user. Also, they have to must have flexible software structure. Finally, through the 'Ubiquitous Interface', we will be experience of seamless communication and realize a real liberty of communication.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.294-294
• /
• 2006

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1
• /
• pp.56-61
• /
• 2001

This paper presents the real-time implementation of an AMR (Adaptive Multi Rate) vocoder which is included in the asynchronous International Mobile Telecommunication (IMT)-2000 mobile ASIC. The implemented AMR vocoder is a multi-rate coder with 8 modes operating at bit rates from 12.2kbps down to 4.75kbps. Not only the encoder and the decoder as basic functions of the vocoder are implemented, but VAD (Voice Activity Detection), SCR (Source Controlled Rate) operation and frame structuring blocks for the system interface are also implemented in this vocoder. The DSP for AMR vocoder implementation is a 16bit fixed-point DSP which is based on the TeakLite core and consists of memory block, serial interface block, register files for the parallel interface with CPU, and interrupt control logic. Through the implementation, we reduce the maximum operating complexity to 24MIPS by efficiently managing the memory structure. The AMR vocoder is verified throughout all the test vectors provided by 3GPP, and stable operation in the real-time testing board is also proved.