• 전기기술인
• /
• 제228권8호
• /
• pp.52-57
• /
• 2001

전기설비 분야에서는 사용하는 전압규격과 사용방식, 접지 System이 어떻게 조화를 이루냐에 따라 안전에 대한 확보여부가 결정된다. 지락 사고시 지락전류는 일정한 어느 한 부분으로만 흐르는 것이 아니라 접지저항의 상황에 따라 분류한다. 이러한 이유로 접지사항이 낮으면 안전하고 높으면 위험하다는 일반적인 잘못된 생각이 사고를 크게 확대시킬 수 있다.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1481-1497
• /
• 2015

Vertical earthquake ground motion may magnify vertical dynamic responses of structures, and thus cause serious damage to bridges. As main support structures, piers and bearings play an important role in vertical seismic response analysis of girder bridges. In this study, the pier and bearing are simplified as a vertical series spring system without mass. Then, based on the assumption of small displacement, the equation of motion governing the simply-supported straight girder bridge under vertical ground motion is established including effects of vertical deformation of support structures. Considering boundary conditions, the differential quadrature method (DQM) is applied to discretize the above equation of motion into a MDOF (multi-degree-of-freedom) system. Then seismic responses of this MDOF system are calculated by a step-by-step integration method. Effects of support structures on vertical dynamic responses of girder bridges are studied under different vertical strong earthquake motions. Results indicate that support structures may remarkably increase or decrease vertical seismic responses of girder bridges. So it is of great importance to consider effects of support structures in structural seismic design of girder bridges in near-fault region. Finally, optimization of support structures to resist vertical strong earthquake motions is discussed.

• Asia pacific journal of information systems
• /
• 제8권1호
• /
• pp.43-64
• /
• 1998

Cooperative query answering is a research effort to develop a fault-tolerant and intelligent database system using the semantic knowledge base constructed from the underlying database. Such knowledge base has two aspects of usage. One is supporting the cooperative query answering process for providing both an exact answer and neighborhood information relevant to a query. The other is supporting ongoing maintenance of the knowledge base for accommodating the changes in the knowledge content and database usage purpose. Existing studies have mostly focused on the cooperative query answering process but paid little attention to the dynamic knowledge base maintenance. This paper proposes a multi-level knowledge representation framework called Knowledge Abstraction Hierarchy(KAH) that can not only support cooperative query answering but also permit dynamic knowledge maintenance, On the basis of the KAH, a knowledge abstraction database is constructed on the relational data model and accommodates diverse knowledge maintenance needs and flexibly facilitates cooperative query answering. In terms of the knowledge maintenance, database operations are discussed for the cases where either the internal contents for a given KAH change or the structures of the KAH itself change. In terms of cooperative query answering, four types of vague queries are discussed, including approximate selection, approximate join, conceptual selection, and conceptual join. A prototype system has been implemented at KAIST and is being tested with a personnel database system to demonstrate the usefulness and practicality of the knowledge abstraction database in ordinary database application systems.

• 설비공학논문집
• /
• 제17권8호
• /
• pp.780-788
• /
• 2005

Two different types of algorithms were developed and applied to detect the partial faults of a multi-type air conditioning system. Partial faults include the compressor valve leakage, the refrigerant pipe partial blockage, the condenser fouling, and the evaporator fouling. The first algorithm was developed by using mathematical models and parity relations, and the second algorithm was developed by using mathematical models and a RBF neural network. Test results showed that the second algorithm was better than the first algorithm in detecting various partial faults of the system. Therefore, the algorithm developed by using mathematical models and a RBF neural network may be used for the detection of partial faults of an air-conditioning system.

• 지구물리
• /
• 제6권1호
• /
• pp.31-38
• /
• 2003

고분해능 천부해저탄성파탐사는 석유탐사에서 사용되는 다중채널 탄성파탐사를 소규모의 천부탐사에 적용한 것으로 단층의 1 m 내외 낙폭까지 구분해 낼 수 있을 만큼 분해능이 높은 탐사를 일컫는다. 육상탐사에서 천부 불균질대에 의한 반사영상의 왜곡처럼 해상 탐사에서는 일반적으로 바다에 항상 존재하는 1 m 내외의 파도에 의해서 그 분해능이 저하될 수 있는데 고분해능 해저 탄성파탐사에서는 이와 같은 너울효과를 제거함으로써 분해능을 향상시킬 수 있다. 기존의 인접심도 평균법을 극복하기 위해 새로이 상호상관 기법을 이용하여 개발된 방법은 해저면의 심도를 보다 정확히 추출함으로써 자료의 분해능을 크게 향상시키는 것으로 나타났다.

• 전기학회논문지
• /
• 제64권8호
• /
• pp.1161-1167
• /
• 2015

Distribution Management System(DMS) ienhancing distribution automation system-based operation efficiency is an optimized system by various operational applications in a distribution network. DMS employs various applications like topology reconfiguration, volt/var control, and restoration at events such as overload, voltage violation, and a fault in a distribution system. An operation efficiency to employ multi-applications as restoration with short-term load forecasting is higher than a performance by a single application; and the applications are accomplished by an operator’s control. Applications’ combination is determined by various alarm information which means critical issues in order to operate a distribution system. Thus, this paper proposes an application management system which can configure application combination, control applications depending on alarm information and check their performance condition. The proposed application management system can be customized by operator easily and have high operation efficiency and reliability because it is worked by reviewed alarm information from operator.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.226-229
• /
• 2003

Following the successful development of practical high temperature superconducting (HTS) wires, there has been renewed activity in the development of superconducting power equipments. HTS equipments must be operated in the coolant, such as liquid nitrogen (L$N_2$) or cooled by cooler, such as GM-cryocooler to maintain the temperature below critical temperature. In this paper, dielectric strength of some insulating materials, such as epoxy, teflon, and glass fiber reinforced plastic (GFRP) in L$N_2$was measured. Surface breakdown voltage of GFRP which is basic property in design of HTS solenoid coil was measured. Epoxy is a goof insulating material but it is fragile at cryogenic temperature. The multi-layer insulating method of current lead is suggested to compensate this fragile property. It consists of teflon tape layer and epoxy layer fixed with texture. Based on these measurements, the 6.6㎸ class HTS magnet for DC reactor type high-T$_{c}$ superconducting fault current limiter (SFCL) was successfully fabricated and tested.d.

• 한국컴퓨터정보학회논문지
• /
• 제8권3호
• /
• pp.53-60
• /
• 2003

현재 각 기업 및 기관에서 구축하고 있는 디지털 콘텐츠는 HTML을 비롯한 다양한 형식의 멀티미디어로 작성되어 있다. 따라서 타 기관에 전시된 콘테츠 정보를 검색하거나 연동하기는 불가능하다. 뿐만아니라 시스템을 확장하기 위해서는 전체 시스템을 교체해야하는 문제도 파생될 수 있다. 그러나 본 연구에서 제안하는 플랫폼은 기존 레거시(Legacy) 어플리케이션을 수정하지 않더라도 쉽게 신 시스템과 연동이되고 타 시스템과도 연동이된다. 또한 CORBA에 기반한 부하 분산 기법과 분산 처리기법을 도입하여 하나의 시스템에 과부하가 발생하여 전체 시스템의 성능이 저하되는 문제를 방지하고 안정성을 보장하기 위하여 Fail-over기능을 제공한다. 또한 SyncML 기법을 도입하여 여러 종류의 DBMS를 사용하는 타 기관과의 콘텐츠 실시간 공유를 지원한다. 이로써 콘텐츠를 쉽게 저장 및 유통할 수 있는 기반 환경을 제공한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.259-262
• /
• 2009

Several universities in Korea are beginning studies related to soft stamping processes but since the studies are done with manual works thus systematic tests can't be performed due to difficulties in producing reproducible and repeatable fine patterns. Therefore, the phenomenon of destruction of the pattern forms of elastic polymers occurred during working because of inconsistent printing pressures and pinting time and there have been difficulties in maintaining flatness or producing uniform and fault-free fine structures in pinting large areas and also, there have been difficulties in multi-layered processes as patterns were changed by contacts in registering and errors in alignments. The purpose of development of this technology is to improve the process of soft lithography so that contacts between PDMS stamps and metal coated substrates in order to develop a stamp printing device that can not only shorten but also optimize processes, secure reproducibility and repeatability and is advantageous in printing large areas. Also, using this technology, this author is to develop equipment technologies and applied technologies for nano grade pattern printing processes with new concepts based on fine contact printing processes in order to apply them to diverse nano pattering processes.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (하)
• /
• pp.1619-1622
• /
• 2002

최근에 생산되는 디지털 VLSI칩들은 그 집적도가 계속 높아지고 있으며, 이러한 칩들을 장착한 보드의 경우도 그 복잡성이 점차 높아지고 있다. 이에 따라 칩 및 보드에 대한 철저한 테스트 과정이 요구된다. 지금까지 보드 테스트 방법으로 널리 쓰였던 ICT(In-Circuit Test)는 칩의 고집적화에 따른 핀 간격의 조밀화와 SMT(Surface Mount Technology), BGA(Ball Grid Array), MCM(Multi Chip Module) 등의 새로운 패키징 방식의 등장에 따라 테스트 방법으로의 한계성을 드러내고 있다. 이에 대한 대안으로 등장한 IEEE Std 1149.1 은 ICT의 한계성을 극복할 수 있는 기술일 뿐 아니라 여러 가지 장점을 가지고 있으며 그 활용 분야도 다양하다. 본 논문에서는 IEEE Std 1149.1에 따라 설계된 보드 상에서 발생 가능한 고장들에 대한 고장 모델을 제시한다. 또한 각 고장 모델들의 양상과 진단 기법을 제시한다. 이를 통해 IEEE Std 1149.1에 따라 설계된 보드 상에서 발생한 고장들을 검출할 수 있으며, 고장의 종류 및 성격, 그리고 고장의 발생 위치 등의 정보를 얻을 수 있다. IEEE Std 1149.1에 따른 보드 설계가 보드의 신뢰성 보장에 긴요함을 인식하는 계기가 되기를 기대하며 제시된 고장 모델 및 진단 기법이 기술적으로 중요한 참고자료가 되기를 기대한다.