• 한국지리정보학회지
• /
• 제5권3호
• /
• pp.1-8
• /
• 2002

지형에 대한 입체적인 조감도의 작성기술은 여러 건설공사의 계획수립과 설계를 위하여 매우 중요한 요소로 활용될 수 있다. 본 연구에서는 원격탐지된 위성영상을 이용하여 기존의 수치지형도와의 결합을 통한 3차원 영상 지도의 제작을 시도하여 다차원적인 분석이 가능한 입체 영상 조감도를 작성하였다. 이를 위하여 GCP에 의한 정사투영된 영상 및 등고선으로부터 생성된 DEM의 결합으로 3차원 지형분석이 가능한 지형의 입체화를 실험하여 건설공사 예정지역의 도로 노선의 연계에 의한 입체적인 접근이 가능한 3차원 조감도를 제작할 수 있는 기술을 개발하였다. 이러한 입체 영상 조감도의 작성에 의한 다각적인 지형분석이 가능하도록 하였고, 건설공사 예정 지역의 실시간적 가상적인 접근이 가능한 연구결과를 얻어냄으로써 균형적인 국토개발 및 건설분야에서의 다양한 활용을 유도할 수 있었다.

• 항공우주시스템공학회지
• /
• 제15권1호
• /
• pp.102-110
• /
• 2021

최근 멀티콥터는 비행 안정성 향상을 위해 다양한 충돌회피 센서를 탑재하고 있다. LiDAR를 이용해 3차원 위치를 인식하거나 다수 카메라와 실시간 SLAM 기술을 이용해 장애물과의 상대 위치를 계산하기도 한다. 또한 소형 프로세스와 카메라로 구성된 3D 깊이 센서를 사용하기도 한다. 본 연구에서는 충돌회피 소프트웨어 기술 개발을 위한 플랫폼으로써 상용 부품을 활용해 실내 비행이 가능한 소형 충돌회피 멀티콥터 시스템을 개발하였다. 멀티콥터 시스템은 LiDAR, RealSense, GPU 보드를 탑재하였고, 비행시험을 통해 YOLO 알고리즘 기반의 사물 인식 및 충돌회피 기능을 검증하였다. 이 논문에서는 시스템 설계/제작 및 탑재 장비 선정과정, 비행시험 결과에 관해 기술하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.597-600
• /
• 2008

최근 국내에서 도심재생을 위한 입체복합공간 개발사업으로 여러 메가프로젝트가 수행중이지만, 메가프로젝트 실적 자료 및 경험, 기술부족으로 인해 여러 가지 문제점들이 드러나고 있다. 다양한 유형의 프로젝트들로 구성된 입체 복합공간 개발 사업에서 프로그램 및 프로젝트 수준으로 메가프로젝트를 관리할 수 있는 기술이 요구된다. 메가프로젝트는 다년간에 걸쳐 수행되는 사업으로 사업기간 예측과 그에 따른 공정관리가 무엇보다 중요하다. 따라서 메가프로젝트 특성에 맞는 프로그램레벨에서의 공정관리 기술 개발이 필요하다. 본 연구에서는 공정관리 기술개발의 선행연구로 사업초기단계 사업기간 예측 및 일정 계획 방법에 대해서 제시하였다. 먼저 과거 수행된 단일시설 및 복합시설의 프로젝트 속성정보와 설계 및 공사기간의 일정데이터를 수집하여, 프로젝트 기간 예측을 위한 DB의 개발방향을 제시하였다. 그리고 메가프로젝트 사업초기단계 사업기간 예측 시 영향을 미치는 발주자의 요구사항과 사업비 투입계획에 따라 시나리오를 개발하여 사업기간 예측 방법에 대해 제시하였고, CCPM을 통한 사업기간 단축가능성을 제시하였다.

• 한국멀티미디어학회논문지
• /
• 제19권5호
• /
• pp.939-947
• /
• 2016

As the number of legacy database systems and the size of data to manipulate have been vastly increased, it has become more difficult and complex to analyze characteristics of data. To improve the efficiency of data analysis and help administrators to make decisions in business life, BI(Business Intelligence) system is used. To construct data warehouse and cube from legacy database systems makes it easy and fast to transform raw data into integrated and categorized meaningful information. In this paper, we built a BI system for an University administration. Several source system databases were integrated to data warehouse to build data cubes. The implemented BI system shows much faster data analysis and reporting ability than the manipulation in legacy systems. It is especially efficient in multi dimensional data analysis, nonetheless in single dimensional analysis.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권4호
• /
• pp.249-254
• /
• 2009

The today's decision making tasks in globalized business and manufacturing become more complex, and ill-defined, and typically multiaspect or multi-discipline due to many influencing factors. The requirement of obtaining fast and reliable decision solutions further complicates the task. Intelligent decision support system (DSS) currently exhibit wide spread applications in business and manufacturing because of its ability to treat ill-structuredness and vagueness associated with complex decision making problems. For multi-dimensional decision problems, generally an optimum single DSS can be developed. However, with an increasing number of influencing dimensions, increasing number of their factors and relationships, complexity of such a system exponentially grows. As a result, software development and maintenance of an optimum DSS becomes cumbersome and is often practically unfeasible for real situations. This paper presents a technically feasible approximation of an optimum DSS through decreasing its complexity by a modular structure. It consists of multiple DSSs, each of which contains the homogenous knowledge's, decision making tools and possibly expertise's pertaining to a certain decision making dimension. Simple, efficient and practical integration mechanism is introduced for integrating the individual DSSs within the proposed overall DSS architecture.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.58-65
• /
• 1995

A numerical study for a two dimensional multi-jet with crossflow of the spent fluid has been carried out. Three different distributions of mass-flow rate at 5 jet exits were assumed to see their effects upon the flow characteristics, especially in the jet-flow region. For each distribution, various Reynolds numbers ranging from laminar to turbulent flows were considered. Calculations drew the following items as conclusion. 1) The development of the free jets issued from downstream jets was hindered by the crossflow formed due to jets. Consequently, the free jet was developed into the channel flow without any evident symptom of impingement jet flow characteristics 2) The crossflow induced the pressure gradient along the cross section of jet exits and the value of the pressure gradient increased as going downstream. The crossflow generated also the turbulent kinetic energy as it collied with the downstream jets. 3) The skin friction coefficient along the impingement plate was affected more by the distribution of mass flow rate at jet exits rather than by the Reynolds number. The skin friction coefficient was inversely proportional to the square root of the Reynolds number, regardless of flow regime when a fully developed flow was formed in the jet flow region. 4) The distribution of the skin friction coefficient along the impingement plate was found to be controlled by adjusting the distribution of mass flow rate at jet exits.

• 한국측량학회지
• /
• 제17권3호
• /
• pp.311-320
• /
• 1999

본 연구에서는 두만강 하류지역 다분광 TM영상의 변환기법과 그에 대한 감독분류방법을 비교 분석하였다. 총체적 분류 정확도는 최대우도법이 높으며 식생은 MNF와 TC 변환 영상에서 비교적 좋은 분류 결과를 얻을 수 있다. MNF, TC, NDVI 등 영상들로 구성된 7차원 영상은 3차원 영상보다 좋은 결과를 나타내며 그 중에서도 최대우도법의 분류 결과가 제일 좋았다. 다분광 영상은 두만강 지역 경제 개발 계획과 산업 입지 선정에 중요한 기초자료로 활용될 수 있다.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.192-199
• /
• 2000

The design of multi-stage gear drives is a time-consuming process because it includes more complicated problems, which are not considered in the design of single-stage gear drives. The designer has no determine the number of reduction stages and the gear ratios of each reduction stage. In addition, the design problems include not only dimensional design but also configuration design of gear drive elements. There is no definite rule or principle for these types of design problems. Thus the design practices largely depend on the sense and the experiences of the designer, and consequently result in undesirable design solution. A new and generalized design algorithm has been proposed to support the designer at the preliminary phase of the design of multi-stage gear drives. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. The algorithm consists of four steps. In the first step, the user determines the number of reduction stages. In the second step, gear ratios of every stage are chosen using the random search method. The values of the basic design parameters of a gear are chose in the third step by using the generate and test method. Then the values of the dimensions, such as pitch diameter, outer diameter and face width, are calculated for the configuration design in the next step. The strength and durability of each gear is guaranteed by the bending strength and the pitting resistance rating practices by using AGMA rating formulas. In the final step, the configuration design is carried out using simulated annealing algorithm. The positions of gears and shafts are determined to minimize the geometrical volume (size) of a gearbox while avoiding interferences between them. These steps are carried out iteratively until a desirable solution is acquired. The proposed design algorithm is applied to the preliminary design of four-stage gear drives in order to validate the availability. The design solution has considerably good results in both aspects of the dimensional and the configuration design.

• 한국군사과학기술학회지
• /
• 제11권5호
• /
• pp.116-123
• /
• 2008

Hydrocodes are large computer programs that can be used to solve a wide variety of highly transient problems such as high-speed impact and explosion events. This paper describes the recent activity to develop a Multi-material hydrocode in Korea. The code consists of two stages; Lagrangian, and remap stages. Although a sophisticated contact algorithm has been developed for Lagrangian calculations, a relatively simple mechanics at the interfaces of materials are used in the multi-material Eulerian code. Volume of fluid interface reconstruction methods are used to resolve the interfaces between different materials. For the advection stage of the cell centered properties, one-dimensional hyperbolic equation is used. Test problems demonstrated here are the high-speed impact/penetration and explosion problems.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.398-403
• /
• 2000

The design of multi-stage gear drives is a time-consuming process that includes additional design problems, which are not considered in the design of single-stage gear drives. In the previous research works, the authors have proposed a new algorithm to design multi-stage gear drives at the preliminary design phase. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. In the configuration design process, the positions of gears and shafts are determined by minimizing the geometrical volume (size) of a gearbox. However, various types of spatial constraints should be satisfied in practical design situation. To locate input and output shaft in specified positions is the typical example of such problems. In this paper, the authors show the formulations of spatial constraints applied to the design of four-stage gear drives. The design solution shows considerably good results, and the design system is confirmed to be readily applicable to practical design situation.