• 한국항공우주학회지
• /
• 제40권11호
• /
• pp.963-971
• /
• 2012

본 논문에서는 항공기 날개의 최적설계 툴을 개발하고, 다중하중스펙트럼 조건에서 항공기 날개의 구조부재에 대한 최적설계를 수행하였다. 공력하중을 계산하기 위해 2차원 CFD의 해석 결과를 사용하였다. 최적화 설계 변수는 리브 및 스파의 개수 및 위치와 두께를 선정하였다. 각각의 비행유형에 대한 순항속도에서의 공력해석 결과로 응력해석을 수행한 후, 피로하중 스펙트럼 임무선도를 활용하여 피로파손해석을 수행하였다. 다중하중 조건의 적용을 위해 손상누적법을 적용하였다. 응력해석에 이은 파손 해석을 포함하는 항공기 날개의 경량화를 진행하였다. 다변수 문제를 효과적으로 최적화하기 위해 PSO(Particle Swarm Optimization) 알고리즘을 사용하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.259-259
• /
• 2008

The LTCC (Low Temperature Co-fired Ceramic) technology meets the requirements for high quality microelectronic devices and microsystems application due to a very good electrical and mechanical properties, high reliability and stability as well as possibility of making integrated three dimensional microstructures. The wet process, which has been applied to the etching of the metallic thin film on the ceramic substrate, has multi process steps such as lithography and development and uses very toxic chemicals arising the environmental problems. The other side, Plasma technology like ion beam sputtering is clean process including surface cleaning and treatment, sputtering and etching of semiconductor devices, and environmental cleanup. In this study, metallic multilayer pattern was fabricated by the ion beam etching of Ti/Pd/Cu without the lithography. In the experiment, Alumina and LTCC were used as the substrate and Ti/Pd/Cu metallic multilayer was deposited by the DC-magnetron sputtering system. After the formation of Cu/Ni/Au multilayer pattern made by the photolithography and electroplating process, the Ti/Pd/Cu multilayer was dry-etched by using the low energy-high current ion-beam etching process. Because the electroplated Au layer was the masking barrier of the etching of Ti/Pd/Cu multilayer, the additional lithography was not necessary for the etching process. Xenon ion beam which having the high sputtering yield was irradiated and was used with various ion energy and current. The metallic pattern after the etching was optically examined and analyzed. The rate and phenomenon of the etching on each metallic layer were investigated with the diverse process condition such as ion-beam acceleration energy, current density, and etching time.

• 정보교육학회논문지
• /
• 제10권3호
• /
• pp.413-422
• /
• 2006

MTP(Muti-grade Tutoring Project)는 공학계열 학생들이 완성도 높은 프로젝트 수행에 필요한 팀워크와 전공기술을 함양하기 위하여 개발된 이공계 교과과목 개발 모델이다. 학습자는 3년간 1,2,3학년으로 구성된 1년 단위 다학년 팀프로젝트에서 튜터와 튜티의 역할을 수행한다. 이러한 과정을 통하여 자신의 비젼을 스스로 설정하고, 선후배간의 커뮤니케이션 채널을 활성화함으로써 인적 네트워크를 형성하여 졸업 후 취업에 지원을 받을 수 있으며 현장에 적응도를 높일 수 있고, 졸업학년도에는 보다 완성도 높은 졸업 프로젝트를 수행할 수 있다. 본 연구에서는 이러한 MTP 교과목을 통하여 경험하는 학습 성장과정을 스스로 관리 개발할 수 있는 MTP e포트폴리오 평가 모형을 제시하였다. 특히 참여자, 학습상의 변화, 과정의 3 차원으로 기술한 평가절차 모형구조는 다학년 학생이 수행하는 프로젝트에 협동교수가 보조하는 과정에서 수업이 역동적이고 활성화 되어질 수 있는 도구로써 활용될 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2696-2701
• /
• 2007

For the analysis of a two-phase flow, the interaction between two phases such as the interfacial momentum or heat transfer is proportional to the interfacial area. So the interfacial area concentration (IAC) is one of the most important parameters governing the behavior of each phase. This study focuses on the development of a computational fluid dynamics (CFD) code for investigating a boiling flow with a one-group IAC transport equation. It was based on the two-fluid model and governing equations were calculated by SMAC algorithm. For checking the robustness of the developed code, the experiment of a subcooled boiling in a vertical annulus channel was analyzed to validate the capability of the IAC transport equation. As the results, the developed code was confirmed to have the capability in predicting multi-dimensional phenomena of vapor generation and propagation in a subcooled boiling.

• 한국초등과학교육학회지:초등과학교육
• /
• 제25권3호
• /
• pp.271-280
• /
• 2006

In this paper, an Online Scientific Inquiry Learning System was developed with the aim of improving student's scientific literacy and scientific inquiry ability. It was determined that there should be 4 distinct principles applicable to the design of the Learning system. First, it should enrich learner's motivation. Second, it should provide students with the chance for reflecting on the inquiry process. Third, it should emphasize multi-dimensional forms of interaction. Fourth, students should be able to create new information through it. The server system including the database, equation editor, reporting tool, search engine were all utilized for developing the learning system. In addition, the authors produced 24 web-based projects which were guided inquiry activities in which various inquiry abilities (reasoning, prediction, experiment design) could be developed. An Online Scientific Inquiry Learning System is not the only program which could be utilized in improving scientific inquiry abilities, but at the very least, such a system can serve as the prototype for developing an online learning system.

• 대한기관식도과학회지
• /
• 제7권2호
• /
• pp.161-167
• /
• 2001

Background and Objectives： Total laryngectomy is often required for advanced cases. But this operation induced the many inconvenience of basic daily life. Early diagnosis of laryngeal cancer is very important to prevent from this disastrous condition. In this point of view, mass screening test for early detection of laryngeal cancer is necessary. Screening test using voice has many advantages such as simple, less interventional. Voice collection by Automatic Response System(ARS) is comfortable and easy to got acoustic sample. Thus author tried to got the acoustic parameters which can differentiate normal, benign. and malignant laryngeal diseases and also checked the availability of parameters on neural network system. Materials and Methods: Author has evaluated the voice from 17 laryngeal cancer patients and 45 benign laryngeal disease patients who visited at Department of Otolaryngology, Pusan National University Hospital from May 1998 to April 2001, and 15 normal control. Author chose the sir Parameters (Jitt. vFo, Shim, vAm, NHR, SPI) that was thought to be related with voice collected by ARS among thirty-three parameters analysed by a Multi-Dimensional Voice Program (MDVP). Two-step neural network was used for the availability of six parameters. Results: The detection rate of normal voice by ARS voice analysis is 78.5% and detection rate of abnormal voice was 97.1 o/o. Among abnormal voice, the detection rate of benign laryngeal diseases and laryngeal cancers were 82.4 o/o, 70.6% respectively. Conclusion: Author concluded that six parameters and Matlab based neural network software may be effective in development of acoustic screening system for laryngeal cancer and further study should be necessary for development of new acoustic parameters.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 추계학술대회
• /
• pp.56-61
• /
• 2014

Standing in front of the huge benefits that shipping industry brings about in economy, politics and society of a country, many countries, especially the developing countries have strived hard to invest and develop their shipping industry (if any) by many methods such as economic reform act, tax allowance or even raising capital from domestic and foreign resources which seems very difficult to implement in the 21st century. According to analysis of A. Gerschenkron - a Russian economic historian at around 60 years ago, developing countries, who regarded shipping as an industry of strategic value with multi-dimensional affects for economic development, had utilized their backward advantages and imported modern technology, capital and skillful labor from more advanced countries in the course of fast industrialization in their countries. In fact, Gerschenkron model has applied in shipping industry of many backward countries. Korea's industrialization in shipping analyzed by Tae-Woo Lee (1996) could considered as a good example, in which the country makes use of policies on capital of tonnage finance, ideology, labor management in order to develop the industry. In this paper, the authors try to find the applicability of the Gerschenkron model to the shipping industry in developing countries, especially in Vietnam. And some questions which are necessary for the author's next paper about developing strategies to shipping industry in developing countries will be asked.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1995년도 제28회 학술발표회
• /
• pp.77-107
• /
• 1995

This paper documents the development of a fuzzy logic based incident detection model for urban diamond interchanges. Research in incident detection for intersections and arterials is at a very initial stage. Existing algorithms are still far from being robust in dealing with the difficulties related with data availability and the multi-dimensional nature of the incident detection problem. The purpose of this study is to develop a new real-time incident detection model for urban diamond interchanges. The development of the algorithm is based on fuzzy logic. The incident detection model developed through this research is capable of detecting lane¬blocking incidents when their effects are manifested by certain patterns of deterioration in traffic conditions and, thereby, adjustments in signal control strategies are required. The model overcomes the boundary condition problem inherent in conventional threshold-based concepts. The model captures system-wide incident effects utilizing multiple measures for more accurate and reliable detection, and serves as a component module of a real-time traffic adaptive diamond interchange control system. The model is designed to be readily scalable and expandable for larger systems of arterial streets. The prototype incident detection model was applied to an actual diamond interchange to investigate its performance. A simulation study was performed to evaluate the model's performance in terms of detection rate, false alarm rate, and mean time to detect. The model's performance was encouraging, and the fuzzy logic based approach to incident detection is promising.

• 방사성폐기물학회지
• /
• 제20권1호
• /
• pp.99-110
• /
• 2022

In decommissioning a nuclear power plant, numerous concrete structures need to be demolished and decontaminated. Although concrete decontamination technologies have been developed globally, concrete cutting remains problematic due to the secondary waste production and dispersion risk from concrete scabbling. To minimize workers' radiation exposure and secondary waste in dismantling and decontaminating concrete structures, the following conceptual designs were developed. A micro-blast type scabbling technology using explosive materials and a multi-dimensional contamination measurement and artificial intelligence (AI) mapping technology capable of identifying the contamination status of concrete surfaces. Trials revealed that this technology has several merits, including nuclide identification of more than 5 nuclides, radioactivity measurement capability of 0.1-10⁷ Bq·g^-1, 1.5 kg robot weight for easy handling, 10 cm robot self-running capability, 100% detonator performance, decontamination factor (DF) of 100 and 8,000 cm²·hr^-1 decontamination speed, better than that of TWI (7,500 cm²·hr^-1). Hence, the micro-blast type scabbling technology is a suitable method for concrete decontamination. As the Korean explosives industry is well developed and robot and mapping systems are supported by government research and development, this scabbling technology can efficiently aid the Korean decommissioning industry.

• 한국수자원학회논문집
• /
• 제51권4호
• /
• pp.335-346
• /
• 2018

최근 ADCP (Acoustic Doppler Current Profiler) 등 첨단장비를 활용한 유량 및 하상측정, 각종 하천기본계획 수립 시 확보되는 횡단측정 자료, 식생 및 서식처 등 하천환경과 생태자료, 드론 등을 활용한 영상자료 등 방대한 하천 정보가 확보되고 있으며, 다기능보 등 다양한 하천구조물 및 친수구역이 증가하는 등 이전과 비교하여 괄목할만한 수준으로 정보의 양이 증가하고 있다. 이에 따라 다양한 하천정보를 체계적으로 저장, 관리, 공유하기 위하여 표준화된 데이터 모델의 수립이 필요하다. 하천 정보의 경우 하천 시설물, 하천 단면측량 자료, 하천 시계열 측정 자료 등이 특정 하천을 중심으로 관리되는 반면, 기존 데이터 모델 연구에서는 특정 주제도에 기반하여 하천 정보가 레이어 형식으로 제공되어 상호 연계되지 않아 하천 정보의 효율적 관리측면에서 적합하지 않았다. 또한 신규 정보를 추가 시 기존 데이터 모델의 과다한 수정이 필요하고, 기존의 데이터 모델의 경우 표준화되지 않아 활용성이 매우 낮고, 유역중심으로 구성되어 특정 조건에 해당되는 하천 정보 검색이 어려운 단점이 존재하였다. 본 연구에서는 기존의 주제도 및 레이어 형식으로 구성되어 있던 데이터 모델 형식에서 벗어나 하천흐름선을 기준으로 데이터모델을 구축하는 방안을 제시하였으며, 하천흐름선과 하천 시설물, 단면 측량 자료, 계측 자료를 순차적으로 수용하고, 최근 신규로 생성되고 있는 다차원 하천 정보의 추가 시 기존 데이터 모델의 형식을 수정하지 않고 유연하게 대응할 수 있는 관계형 데이터 모델을 구상하였다. 또한, 하천과 유역의 논리적 저장방안 고려하여 한 개의 하천을 다수의 세그먼트로 구분하여 코드(Reach Code)를 부여하는 방안을 제시하였으며, 구상한 데이터모델을 통하여 국가하천과 지방하천 등 유역의 다양성을 포함하는 한강권역의 섬강유역을 시범하천으로 구축하였다.