• Structural Engineering and Mechanics
• /
• v.84 no.2
• /
• pp.143-154
• /
• 2022

Corrosion of steel reinforcement is considered as the main cause of concrete structures deterioration, especially those under humid environmental conditions. Hence, fiber reinforced polymer (FRP) bars are being increasingly used as a replacement for conventional steel owing to their non-corrodible characteristics. However, predicting the shear strength of beams reinforced with FRP bars still challenging due to the lack of robust shear theory. Thus, this paper aims to develop an explicit data driven based model to predict the shear strength of FRP reinforced beams using multi-objective evolutionary polynomial regression analysis (MOGA-EPR) as data driven models learn the behavior from the input data without the need to employee a theory that aid the derivation, and thus they have an enhanced accuracy. This study also evaluates the accuracy of predictive models of shear strength of FRP reinforced concrete beams employed by different design codes by calculating and comparing the values of the mean absolute error (MAE), root mean square error (RMSE), mean (𝜇), standard deviation of the mean (𝜎), coefficient of determination (R²), and percentage of prediction within error range of ±20% (a20-index). Experimental database has been developed and employed in the model learning, validation, and accuracy examination. The statistical analysis illustrated the robustness of the developed model with MAE, RMSE, 𝜇, 𝜎, R², and a20-index of 14.6, 20.8, 1.05, 0.27, 0.85, and 0.61, respectively for training data and 10.4, 14.1, 0.98, 0.25, 0.94, and 0.60, respectively for validation data. Furthermore, the developed model achieved much better predictions than the standard predictive models as it scored lower MAE, RMSE, and 𝜎, and higher R² and a20-index. The new model can be used in future with confidence in optimized designs as its accuracy is higher than standard predictive models.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1225-1233
• /
• 2024

Level 3 probabilistic safety assessment (PSA) is performed to calculate radionuclide concentrations and exposure dose resulting from nuclear power plant accidents. To calculate the external exposure dose from the released radioactive materials, the radionuclide concentrations are multiplied by two factors of dose coefficient and a finite cloud dose correction factor (FCDCF), and the obtained values are summed. This indicates that a standard set of FCDCFs is required for external exposure dose calculations. To calculate a standard set of FCDCFs, the effective distance from the release point to the receptor along the wind direction should be predetermined. The TID-24190 document published in 1968 provides equations to calculate FCDCFs and the resultant standard set of FCDCFs. However, it does not provide any explanation on the effective distance required to calculate the standard set of FCDCFs. In 2021, Sandia National Laboratories (SNLs) proposed a method to predetermine finite effective distances depending on the atmospheric stability classes A to F, which results in six standard sets of FCDCFs. Meanwhile, independently of the SNLs, the authors of this paper discovered that an infinite effective distance assumption is a very reasonable approach to calculate one standard set of FCDCFs, and they implemented it into the multi-unit radiological consequence calculator (MURCC) code, which is a post-processor of the level 3 PSA codes. This paper calculates and compares short- and long-range FCDCFs calculated using the TID-24190, SNLs method, and MURCC method, and explains the strength of the MURCC method over the SNLs method. Although six standard sets of FCDCFs are required by the SNLs method, one standard sets of FCDCFs are sufficient by the MURCC method. Additionally, the use of the MURCC method and its resultant FCDCFs for level 3 PSA was strongly recommended.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.2
• /
• pp.206-216
• /
• 2022

This study aimed to investigate the frequency of dental visits after coronavirus disease 2019 (COVID-19) in children and adolescents in comparison to that of adults. The data on the number of dental visits on the basis of different classification and treatment codes for all the age groups were provided by the Health Insurance Review and Assessment Service from January 2017 to December 2020. To reduce the impact of the population change, dental visits per 1000 people was used. After the start of the pandemic, dental visits per 1000 people decreased in all age groups when analyzed for the diseases of pulp and periapical tissues classification code and dental visits per 1000 people decreased over 5 years age groups when analyzed for the pulp treatment code. Regarding the restorative treatment code, visits in the 0 - 19 years age group decreased after the pandemic. Based on the comparison of the number of confirmed COVID-19 cases to that of monthly dental visits by treatment codes, the change rate of pulp and restorative treatments gradually decreased after the waves of the pandemic in February and August 2020 in Korea. Furthermore, dental visits per 1000 people for gingivitis and periodontal disease classification code increased after the pandemic in all age groups. The rate of decrease in dental visits per 1000 people for restorative treatments in children and adolescents was higher than that in adults. The rate of decrease in the number of dental visits for multi-visit pulp treatments showed a rapid decrease as compared to that of 1-visit pulp treatments after the pandemic. This study identified changes in the number of dental visits of children and adolescents after COVID-19 transmission in comparison to that observed in adults.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.445-452
• /
• 2019

In this study, parallel processing codes of k-means clustering algorithm were developed and implemented in a PC-cluster for unsupervised classification of large satellite images. We implemented intra-node code using multicores of CPU (Central Processing Unit) based on OpenMP (Open Multi-Processing), inter-nodes code using a PC-cluster based on message passing interface, and hybrid code using both. The PC-cluster consists of one master node and eight slave nodes, and each node is equipped with eight multicores. Two operating systems, Microsoft Windows and Canonical Ubuntu, were installed in the PC-cluster in turn and tested to compare parallel processing performance. Two multispectral satellite images were tested, which are a medium-capacity LANDSAT 8 OLI (Operational Land Imager) image and a high-capacity Sentinel 2A image. To evaluate the performance of parallel processing, speedup and efficiency were measured. Overall, the speedup was over N / 2 and the efficiency was over 0.5. From the comparison of the two operating systems, the Ubuntu system showed two to three times faster performance. To confirm that the results of the sequential and parallel processing coincide with the other, the center value of each band and the number of classified pixels were compared, and result images were examined by pixel to pixel comparison. It was found that care should be taken to avoid false sharing of OpenMP in intra-node implementation. To process large satellite images in a PC-cluster, code and hardware should be designed to reduce performance degradation caused by file I / O. Also, it was found that performance can differ depending on the operating system installed in a PC-cluster.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.22-30
• /
• 2011

In this paper, we propose a memory efficient multi-rate Low Density Parity Check (LDPC) decoder for China Mobile Multimedia Broadcasting (CMMB). We find the best trade-off between the performance and the circuit area by designing a partially parallel decoder which is capable of passing multiple messages in parallel. By designing an efficient address generation unit (AGU) with an index matrix, we could reduce both the amount of memory requirement and the complexity of computation. The proposed regular LDPC decoder was designed in Verilog HDL and was synthesized by Synopsys' Design Compiler using Chartered $0.18{\mu}m$ CMOS cell library. The synthesized design has the gate size of 455K (in NAND2). For the two code rates supported by CMMB, the rate-1/2 decoder has a throughput of 14.32 Mbps, and the rate-3/4 decoder has a throughput of 26.97 Mbps. Compared with a conventional LDPC for CMMB, our proposed design requires only 0.39% of the memory.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.44-51
• /
• 2002

This paper describes the performance evaluation and analysis of an Orthogonal Frequency-Division Multiplexing (OFDM) system having the least Inter Symbol Interference (ISI) in a multi-path fading channel environment. Wireless Local Area Network (W-LAN) in accordance with IEEE 802.11a and IEEE 802.11b provides high-speed transmission to universities, businesses and other various places. In addition, service providers can offer a public W-LAN service on restricted areas such as a subway. The proliferation of W-LAN has led to greater W-LAN service demands, but problems are also on the rise in offering a good W-LAN service. In particular, urban areas with high radio wave interference and many buildings are vulnerable to deteriorated QoS including disconnected data and errors. For example, when high-speed data is transmitted in such areas, the relatively high frequency generates ISI between Access Points (AP) and Mobile Terminals (such as a notebook computer), leading to a frequency selective fading channel environment. Consequently, it is difficult to expect a goodW-LAN service. The simulation proves that the OFDM system enables W-LAN to implement QoS in high-speed data transmission in a multi-path fading channel environment. The enhanced OFDM performance with 52 sub-carriers is verified via data modulation methods such as BPSK, QPSK and 16QAM based on IEEE 802.11a and punched convolutional codes with code rate of 1/2 and 3/4 and constraint length of 7. Especially, the simulation finds that the OFDM system has better performance and there is no data disconnection even in a mobile environment by applying a single tap equalizer and a decision feedback equalizer to a mobile channel environment with heavy fading influence. Given the above result, the OFDM system is an ideal solution to guarantee QoS of the W-LAN service in a high-speed mobile environment.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.9_10
• /
• pp.429-440
• /
• 2008

As embedded system becomes more complex, software development becomes more important in the entire design process. Most embedded applications consist of multi -tasks, that are executed in parallel. So, dataflow model that expresses concurrency naturally is preferred than sequential programming language to develop multitask software. For the execution of multitasking codes, operating system is essential to schedule multi-tasks and to deal with the communication between tasks. But, it is needed to execute multitasking code without as when the target hardware platform cannot execute as or target platforms are candidates of design space exploration, because it is very costly to port as for all candidate platforms of DSE. For this reason, we propose the serialized multitasking code generation technique from dataflow specification. In the proposed technique, a task is specified with dataflow model, and generated as a C code. Code generation consists of two steps: First, a block in a task is generated as a separate function. Second, generated functions are scheduled by a multitasking scheduler that is also generated automatically. To make it easy to write customized scheduler manually, the data structure and information of each task are defined. With the preliminary experiment of DivX player, it is confirmed that the generated code from the proposed framework is efficiently and correctly executed on the target system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.4
• /
• pp.277-286
• /
• 2012

In the numerical simulation of wave fields using a multi-phase flow model that considers simultaneous flows of materials with different states such as gas, liquid and solid, there is need of an accurate representation of the interface separating the fluids. We adopted an algebraic interface capturing method called tangent of hyperbola for interface-capturing(THINC) method for the capture of the free-surface in computations of multi-phase flow simulations instead of geometrical-type methods such a volume of fluid(VOF) method. The THINC method uses a hyperbolic tangent functions to represent the surface, and compute the numerical flux for the fluid fraction functions. One of the remarkable advantages of THINC method is its easy applicability to incorporate various numerical codes based on Navier-Stokes solver because it does not require the extra geometric reconstruction needed in most of VOF-type methods. Several tests were carried out in order to investigate the advection of interfaces and to verify the applicability of the THINC method to wave fields based on the one-field model for immiscible two-phase flows (TWOPM). The numerical results revealed that the THINC method is able to track the interface between air and water separating the fluids although its algorithm is fairly simple.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.612-622
• /
• 2013

In this paper, we propose a coding packet group-based ARQ scheme (rNC) for file delivery in wireless networks. rNC assumes multiple network coding points between the source and the destination. Each network coding point gathers and codes a group of packets according to the queue polling system. A queue polling system makes a few or several packets available for coding in a queue while polling the other queues in the system. Thus, we assuem a queue polling system at each network coding point. We call this group of packets as coded packet group. Each coding point acknowledges the reception of every code packet group to its previous coding point for reliable delivery. Thus, the intermediate coding points including the source can release its buffer before the packet is delivered to the destination. To guarantee the ultimate file delivery to the destination, the destination sends acknowledgement to the sender. We evaluate our proposed scheme using ns-2 and compare the performance with CodeCast. The results show that rNC works better than CodeCast in terms of packet delivery ratio and control overhead in unreliable wireless networks.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.131-140
• /
• 2013

This paper deals with the design and implementation of an interface for interoperation between DiskSim, a well-known disk simulator, and a system-level simulator based on DEVSim++. Such inter-operational simulation aims at evaluation of an overall performance of storage systems which consist of multiple computer nodes with a variety of I/O level specifications. A well-known system-level simulation framework, DEVSim++ environment is based on the DEVS formalism, which provides a sound semantics of modular and hierarchical modeling methodology at the discrete event systems level such as multi-node computer systems. For maintainability we assume that there is no change of the source codes for two heterogeneous simulation engines. Thus, we adopt a notion of simulators interoperation in which there should be a means to synchronize simulation times as well as to exchange messages between simulators. As an interface for such interoperation DiskSimManager is designed and implemented. Various experiments, comparing the results of the standalone DiskSim simulation and the interoperation simulation using the proposed interface of DiskSimManager, proved that DiskSimManager works correctly as an interface for interoperation between DEVSim++ and DiskSim.