Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

A new method to calculate a standard set of finite cloud dose correction factors for the level 3 probabilistic safety assessment of nuclear power plants

  • Gee Man Lee (Sejong University, Nuclear Engineering Department) ;
  • Woo Sik Jung (Sejong University, Nuclear Engineering Department)
  • Received : 2023.08.12
  • Accepted : 2023.11.12
  • Published : 2024.04.25
Download PDF
⟨ Previous Next ⟩

Abstract

Level 3 probabilistic safety assessment (PSA) is performed to calculate radionuclide concentrations and exposure dose resulting from nuclear power plant accidents. To calculate the external exposure dose from the released radioactive materials, the radionuclide concentrations are multiplied by two factors of dose coefficient and a finite cloud dose correction factor (FCDCF), and the obtained values are summed. This indicates that a standard set of FCDCFs is required for external exposure dose calculations. To calculate a standard set of FCDCFs, the effective distance from the release point to the receptor along the wind direction should be predetermined. The TID-24190 document published in 1968 provides equations to calculate FCDCFs and the resultant standard set of FCDCFs. However, it does not provide any explanation on the effective distance required to calculate the standard set of FCDCFs. In 2021, Sandia National Laboratories (SNLs) proposed a method to predetermine finite effective distances depending on the atmospheric stability classes A to F, which results in six standard sets of FCDCFs. Meanwhile, independently of the SNLs, the authors of this paper discovered that an infinite effective distance assumption is a very reasonable approach to calculate one standard set of FCDCFs, and they implemented it into the multi-unit radiological consequence calculator (MURCC) code, which is a post-processor of the level 3 PSA codes. This paper calculates and compares short- and long-range FCDCFs calculated using the TID-24190, SNLs method, and MURCC method, and explains the strength of the MURCC method over the SNLs method. Although six standard sets of FCDCFs are required by the SNLs method, one standard sets of FCDCFs are sufficient by the MURCC method. Additionally, the use of the MURCC method and its resultant FCDCFs for level 3 PSA was strongly recommended.

Keywords

Acknowledgement

This work was supported by the Korea Foundation Of Nuclear Safety (KOFONS) grant funded by the Nuclear Safety and Security Commission (NSSC), Republic of Korea (Nos. 2106062-0323-SB110 and 2204017-0223-SB110).

References

  1. K.F. Eckerman, J.C. Ryman, External exposure to radionuclides in air, water, and soil, FGR- 12 (September 1993) 11-12.
  2. D.H. Slade, Meteorology and Atomic Energy 1968, TID-24190, July 1968, pp. 350-355, 336-346.
  3. U.S. NRC, Appendix VI, WASH-1400, in: Reactor Safety Study: an Assessment of Accident Risks in U.S. Commercial Nuclear Power Plants, October 1975, pp. 51-54. NUREG-75/014.
  4. D.L. Strenge, Models Selected for Calculation of Doses, Health Effects and Economic Costs Due to Accidental Radionuclide Releases from Nuclear Power Plants, NUREG/CR-1021, May 1980, pp. 129-131. PNL-3108.
  5. H.N. Jow, J.L. Sprung, J.A. Rollstin, L.T. Ritchie, D.I. Chanin, MELCOR accident consequence code system (MACCS): model description, NUREG/CR-4691 2 (February 1990) 64-65. SAND86-1562.
  6. N.E. Bixler, EARLY-Phase Health Effects, SAND2016-8598PE, MACCS Workshop, Bethesda, MD, USA, September 2016.
  7. Sandia National Laboratories, MACCS User Guide - Version 4.2, SAND2023-01315, vol. 175, March 2023, p. 238.
  8. J.V. Ramsdell Jr., G.F. Athey, J.P. Rishel, RASCAL 4.3 User's Guide (Draft), October 2013, p. 100.
  9. S.A. McGuire, J.V. Ramsdell Jr., G.F. Athey, RASCAL 3.0.5: Description of Models and Methods, NUREG-1887, August 2007, pp. 91-97.
  10. H.R. Lee, G.M. Lee, W.S. Jung, S.J. Han, Comparison of Two Methods for Dose Distribution Calculation of Multi-Unit Site, Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, 2017. October 26-27.
  11. H.R. Lee, G.M. Lee, W.S. Jung, A method to calculate off-site radionuclide concentration for multi-unit nuclear power plant accident, J. Korea Soc. Safety 33 (6) (December 2018) 144-156.
  12. W.S. Jung, H.R. Lee, J.R. Kim, G.M. Lee, Development of MURCC code for the efficient multi-unit level 3 probabilistic safety assessment, Nucl. Eng. Technol. 52 (10) (October 2020) 2221-2229. https://doi.org/10.1016/j.net.2020.03.007
  13. D.J. Clayton, Update to the Finite Cloud Dose Correction Factors in MACCS, October 2021. SAND2021-13183.
  14. J.M. Stockie, The mathematics of atmospheric dispersion modelling, SIAM 53 (2) (2011) 349-372. https://doi.org/10.1137/10080991X
  15. A. Leelossy, F. Molnar Jr., F. Izsak, A. Havasi, I. Lagzi, R. Meszaros, Dispersion modeling of air pollutants in the atmosphere: a review, Cent. Eur. J. Geosci. 6 (3) (2014) 257-278.
  16. J.E. Till, H.A. Grogan, Radiological Risk Assessment and Environmental Analysis, Oxford University Press, 2008, pp. 134-135.
  17. E. Mastorakos, 5R18: environmental fluid mechanics and air pollution; dispersion of pollution in the atmospheric environment, Hopkinson Lab., pp. 38-42.
  18. Japan Atomic Energy Research Institute (JAERI), SPEEDI, A computer code system for the real-time prediction of radiation dose to the public due to an accidental release, JAERI 1297 (October 1985) 64-68, 40-41.
  19. B.A. Napier, P.W. Eslinger, D.K. Strenge, C. Fosmire, J.V. Ramsdell Jr., GENII Version 2 Software Design Reference, PNNL-14584, U.S. DoE, November 2004.
  20. U.S. DoE, MACCS2 Computer Code Application Guidance for Referenced Safety Analysis, DOE-EH-4.2.1.4, June 2004, pp. 159-160, 193-194.
  21. J.R. Kim, G.M. Lee, W.S. Jung, S.J. Han, Level 3 MUPSA at 9 Unit Nuclear Site Using MACCS2 and MURCC Codes, Transaction of the Korea Nuclear Society Spring Meeting, Jeju, Korea, 2020. May 21-22.
  22. J.R. Kim, G.M. Lee, S.J. Han, M.W. Kwak, W.S. Jung, Comparison of Semi-infinite and Finite Clouds Effects for the External Dose Exposure Calculation in Level 3 SUPSA and MUPSA, Transaction of the Korea Nuclear Society Autumn Meeting, Changwon, Korea, 2020. December 17-18.
  23. E.C. Eimutis, M.G. Konicek, Derivations of continuous functions for the lateral and vertical atmospheric dispersion coefficients, Atmos. Environ. 6 (1972) 859-863. https://doi.org/10.1016/0004-6981(72)90057-1