• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.99-106
• /
• 2006

In this paper, implementation of active mufflers using multiple channel adaptive IIR filter is presented. Usually, recursive LMS(RLMS) algorithms for adaptive IIR filters are highly efficient than filtered-X LMS(FXLMS) algorithms, when the order of both algorithms are the same. However, RLMS algorithms usually diverge before the algorithms arenot yet converged. So, the prefilters are presented to improve the stability by pulling the poles of feedback control transfer function in the beginning of active noise control and returning the original poles after the filters converge. The engine noises of diesel engine automobiles and gasoline engine automobiles are analyzed and the mathematical model of an active muffler is derived. Computer simulations and experiments are performed to show the effectiveness of the proposed systems.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.74-82
• /
• 1989

In this paper, we have studied on the methodologies of implementation and the performance evaluations about the real-time packetized coding of multi-channel speech signals. Our suggested coding algorithm is very, simple and it has majorly the data handling operations rather than the numerical calculations. And it gives about $40\%$ of compression ratio with less than the conventional codings. Nevertheless, using this algorithm, we can save the memories for the speech signal and we can raise the efficiency of the channel transmission. Especially because of its simplicity of algorithm, we can easily obtain the merits of the multi-channel operations.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.2
• /
• pp.31-37
• /
• 2001

In this paper, We designed and implemented an RF module for WLL multi-channel personal stations. Then, we experimentally evaluated in receiving sensitivity, adjacent channel interference selectivity and spurious response limit. From the measurement results on the RF module for WLL multi-channel personal stations, we observed and confirmed as follows: First, the variation in output power level was kept to be less than 30 dBm in the range of the input power level from -90 dBm to -30dBm. This measurement result confirmed the dynamic range of 60 dB. Secondly, at the output stage of the RF module, the gain flatness in the pass band was measured to be less than 2dB, which confirmed a precise control of the bandspread signals. Thirdly, at the RF module, the bandwidth and power level in transmission were measured to be 10 MHz, respectively we note that these features satisfy the design specifications.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1751-1758
• /
• 2018

An integrated medical information system that integrates systems consisting of different environments centered on hospital information systems should be provided as a system that prioritizes the improvement of the quality of medical services, customer satisfaction, and patient safety. The RBAC-based medical information system is granted the access right according to task type, role, and rules. Through this, it is possible to use SMS channel, medical reservation and cancellation, customized statistics, and CRM / EMR interworking service using multi-channel to enable communication service without help of counselor and reduce the default rate of reservation patient, Operational improvement services can be extended to medical staff, patients and their families, as well as expanding to important decisions for patients.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.798-809
• /
• 2013

In this paper, we propose robust relay and destination filter design methods for the multi-user peer-to-peer amplify-and-forward relaying systems while taking imperfect channel knowledge into consideration. Specifically, the relay and destination filter sets are developed to minimize the sum mean-squared-error (MSE). We first present a robust joint optimum relay and destination filter calculation method with an iterative algorithm. Motivated by the need to reduce computational complexity of the iterative scheme, we then formulate a simplified sum MSE minimization problem using the relay filter decomposability, which lead to two robust sub-optimum non-iterative design methods. Finally, we propose robust modified destination filter design methods which require only local channel state information between relay node and a specific destination node. The analysis and simulation results verify that, compared with the optimum iterative method, the proposed non-iterative schemes suffer a marginal loss in performance while enjoying significantly improved implementation efficiencies. Also it is confirmed that the proposed robust filter design methods provide desired robustness in the presence of channel uncertainty.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.674-677
• /
• 2004

This paper deals with a systematic approach for the construction of the fixed-delay tree search (FDTS) detector in the intersymbol interference channel. The approach is based on the efficient multi-dimensional space partitioning. The Voronoi diagram (VoD) and the Delaunay tessellation (DT) of the multi-dimensional space are applied to implement the algorithm. In the proposed approach, utilizing the geometric information contained in the VOD/DT, the relative location of the observation sequence is determined which has been shown to reduce the implementation complexity. Detailed construction procedures are discussed followed by an example from the intersymbol interference communication channel.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.612-619
• /
• 2014

This paper proposes a real-time multi-camera video surveillance system with automatic resolution control using motion detection. In ordinary times, it acquires 4 channels of QVGA images, and it merges them into single VGA image and transmit it. When motion is detected, it automatically increases the resolution of motion-occurring channel to VGA and decreases those of 3 other channels to QQVGA, and then these images are overlaid and transmitted. Thus, it can magnifies and watches the motion-occurring channel while maintaining transmission bandwidth and monitoring all other channels. When it is synthesized with 0.18 um technology, the maximum operating frequency is 110 MHz, which can theoretically support 4 HD cameras.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.51-59
• /
• 2016

The progression of broadcasting technology changed the previous analogue broadcasting system into digital, which in result allowed several broadcasting programs to be transmitted as one stream by multiplexing. This multi channel environment interferes with audience to choose the program they want. EPG acts as supporter in this multi channel environment. The existing EPG system is limited in providing searching function with title, genre, date and Wish-list in multi-media environment. Thus, this thesis proposes new type EPG using PSIP information modification to respond with the change of broadcasting market. This type of EPG can be applied to several kinds of broadcasting systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.165-173
• /
• 2010

WMN(Wireless Mesh Network) is an wireless backbone network technology that is an easily configurable network in the low cost compared to the wireless LAN(Local Area Network). Most of the previous researches have evaluated their algorithms by the simulations rather than by the implementation. There exist some implementation papers, however, they have the limitations of the flexibility on the link establishment and the link quality utilization. Consequently, the benefit of the WMN - configuration flexibility is degraded and the performance deterioration occurs in the multi-hop wireless environment. In this paper, we introduce a Linux-based link layer Wireless Mesh Routing System - WBMR. The design and implementation of WBMR provides the dynamic link establishment and the effective multi-channel usage. We have modified the ntroof the original WLAN operation for the dynamic link establishment, and the Linux bridge for the link layer routing. The result of performance evaluation verifies that our WBMR supports fast self-configuration and increases data transmission throughput compared to the other researches of the wireless multi-hop environment.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.319-326
• /
• 2011

Beamforming techniques have been successfully utilized for traffic channels in order to solve the interference problem. However, their use for control channels has not been sufficiently investigated. In this paper, a (semi-) centralized beamforming strategy that adaptively changes beam patterns and controls the total transmit power of cells is proposed for the performance enhancement of the common channel in hierarchical cell structure (HCS) networks. In addition, some examples of its practical implementation with low complexity are presented for two-tier HCS networks consisting of macro and pico cells. The performance of the proposed scheme has been evaluated through multi-cell system-level simulations under optimistic and pessimistic interference scenarios. The cumulative distribution function of user geometry or channel quality has been used as a performance metric since in the case of common control channel the number of outage users is more important than the sum rate. Simulation results confirm that the proposed scheme provides a significant gain compared to the random beamforming scheme as well as conventional systems that do not use the proposed algorithm. Finally, the proposed scheme can be applied simultaneously to several adjacent macro and pico cells even if it is designed primarily for the pico cell within macro cells.