• The Journal of the Acoustical Society of Korea
• /
• v.21 no.6
• /
• pp.510-521
• /
• 2002

MBE (multi-band excitation) coder can achieve high qualify synthetic speech below 4.0 kbps. There are, however, significant differences of the fine structure between the original spectrum and the synthetic spectrum. They are mainly due to the exclusive partition of voiced and unvoiced regions in frequency domain and the decision procedure based on the experimental threshold. This paper proposes MMBE (mixed multi-band excitation) speech model to overcome drawbacks of a MBE coder. In addition, two analysis methods, which do not need my decision procedure based on a threshold, are presented. Both voiced and unvoiced components can be mixed over all the frequency axis in the MMBE speech model. To illustrate the potential of the proposed speech model, we develop a 2.6 kbps MMBE coder and compare it with a 2.9 kbps MBE coder by both objective and subjective methods. The results have shown that the proposed coder has a better performance even at a lower bit-rate compared with the MBE coder.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.8
• /
• pp.91-97
• /
• 2012

This paper first proposes the speech recognition algorithm by detection of the speech and noise sections at each frame, then proposes the reduction algorithm of environmental noise by multi-band filter which removes the background noises at each frame according to detection of the speech and noise sections. The proposed algorithm reduces the background noises using filter bank sub-band domain after extracting the features from the speech data. In this experiment, experimental results of the proposed noise reduction algorithm by the multi-band filter demonstrate using the speech and noise data, at each frame. Based on measuring the spectral distortion, experiments confirm that the proposed algorithm is effective for the speech by corrupted the noise.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.537-543
• /
• 2010

This paper presents a slot-shaped defected ground structure(DGS) which has multi-band rejection property. The proposed structure, in which the spiral slot-shaped defects with different size are aligned in the transverse direction to the guiding direction of the coplanar waveguide(CPW), provides multiple resonance frequencies. Compared with the simulated results, the band rejection characteristic is in good agreement with the measurement. Also, an equivalent circuit model of the proposed structure is presented, where the DGS on the ground plane is modeled as LC-resonators. This resonators are inductively coupled to the signal line through mutual inductance. From the equivalent circuit model, multi-band rejection property was derived.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.77-84
• /
• 2003

This paper presents a multi-functional microstrip spital antenna that operates in dual frequency bands. Several types of beam shape can be selected by controlling the phase difference of two spiral arms with the phase shifters located on each feed line. It has a normal beam at the lower frequency band, and four different patterns at the higher frequency band: normal beam, conical beam and two types of tilted beam. The antenna exhibits more than 10% of bandwidth at each band. The antenna is fabricated with conductor backed electromagnetic absorber in order to attain unidirectional radiation pattern and confirmed the multi-functionality by measurements.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.1
• /
• pp.19-28
• /
• 2006

The noise temperature of existing millimeter-wave receivers is already within two or three times quantum noise limit. One of practical ways to increase the observation speed of single dish radio telescope without longer integration time is use of multi-beam focal plane array receiver as demonstrated in several large single dish radio telescopes. In this context the TRAO (Taeduk Radio Astronomy Observatory), which operates a 143n Cassegrain radio telescope, is planning to develop a 4 x 4 beams focal plane array SIS receiver system for 86-115 GHz band. Even though millimeter-wave HEMT LNA-based receivers approach the noise temperature comparable to the SIS receiver at W-band, it is believed that the receiver based on SIS mixer seems to offer a bit more advantages. The critical part of the multi-beam array receiver will be sideband separating SIS mixers. Employing such a type of SIS mixer makes it possible to simplify the quasi-optics of receiver. Otherwise, an SSB filter should be used in front of the mixer or some sophisticated post-processing of observation data is needed. In this paper we will present a preliminary design concept and components needed for the development of a new 3 mm band multi-beam focal plane array receiver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.358-363
• /
• 2007

The multi-band and wide-band antenna for a portable broadcasting terminal is proposed. The proposed antenna consists of two radiators with a parallel structure. The antenna has an enough wide impedance bandwidth for the DVB-H(Digital Video Broadcasting-Handheld) service band since two radiators have adjacent resonance frequencies and operates in the DAB(Digital Audio Broadcasting) service band using the third harmonic of the radiator 1. The fabricated antenna has VSWR characteristics of less than 2:1 in the frequency band $470{\sim}740\;MHz$ for DVB-H and $1,450{\sim}1,480\;MHz$ for DAB. The measured peak gain of the antenna is $1.97{\sim}4.10\;dBi$ in the DVB-H band and $1.98{\sim}2.04\;dBi$ in the DAB band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2847-2856
• /
• 2014

It is necessary for maritime multi-band networks, which provide ships with diverse and seamless multimedia services, to perform vertical handover. As IEEE 802.21 WG has standardized vertical handover technologies for terrestrial wireless networks that do not consider VHF, HF, satellite networks, they cannot be directly applied to maritime multi-band networks. In this paper, the vertical handover framework for use in maritime mutlti-band networks is proposed, which includes the logical architecture, the communication reference model, re-defined handover primitives, and the handover process. The proposed vertical handover for maritime multi-band network can be applied in the ocean alone, as well as to the heterogeneous wireless networks which embrace both terrestrial and maritime networks.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.1
• /
• pp.20-23
• /
• 2006

본 논문은 MB-OFDM UWB(Multi Band-Orthogonal Frequency Division Multiplexing Ultra Wide Band) 시스템을 위한 변형된 가변 파라미터를 이용한 큐빅 인터폴레이터를 제안한다. MB-OFDM UWB 시스템은 고속의 동작속도가 필요하기 때문에, 기존 가변 파라미터를 이용한 큐빅 인터폴레이터에 병렬 처리 기술과 파이프라인 기법을 동시에 적용한다. 실험 결과, Stratix II 2S60F101020C3 디바이스를 타켓으로 최대지연경로 속도와 최대지연경로 주기가 각각 최대 88.79MHz와 11.262ns가 되었고, 동작속도는 최대 대략 200% 이상 향상되었음을 알 수 있다.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.16-20
• /
• 2011

In this paper, we designed and implemented an internal multi-band folded monopole antenna for mobile handset. The proposed antenna covers Global System for Mobile Communications (GSM900: 880~960 MHz), Digital Communications System (DCS: 1710~1880 MHz), US-Personal Communications Service (US-PCS: 1850~1990 MHz), Bluetooth(2400~2484 MHz), WiMAX(3400~3600 MHz), and Wireless Local Area Network (WLAN: 5150~5350 MHz, 5725~5875 MHz) band for Voltage Standing Wave Ratio $(VSWR)\;{\le}\; 3$. The measured peak gains of the implemented antenna are -1.78dBi at 920MHz, 2.72dBi at 1795MHz, 2.25dBi at 1920MHz, 2.34dBi at 2442MHz, 2.11 dBi at 3550MHz, and 2.04 dBi at 5250MHz.

• Journal of applied mathematics & informatics
• /
• v.41 no.5
• /
• pp.1115-1128
• /
• 2023

In this paper, a novel hybrid method for multi-focus image fusion is proposed. The method combines the advantages of wavelet transform-based methods and focus-measure-based methods to achieve an improved fusion result. The input images are first decomposed into different frequency sub-bands using the discrete wavelet transform (DWT). The focus measure of each sub-band is then calculated using the Laplacian of Gaussian (LoG) operator, and the sub-band with the highest focus measure is selected as the focused sub-band. The focused sub-band is sharpened using an unsharp masking filter to preserve the details in the focused part of the image.Finally, the sharpened focused sub-bands from all input images are fused using the maximum intensity fusion method to preserve the important information from all focus images. The proposed method has been evaluated using standard multi focus image fusion datasets and has shown promising results compared to existing methods.