• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.58-63
• /
• 2004

In the present work a finite element formulation using dynamic-explicit time integration scheme is used for numerical analysis of multi-stage stamping processes. The lumping scheme is employed for the diagonal mass matrix and dynamic explicit formulation Multi-Stage stamping is analyzed by using dynamic-explicit finite element method. Further, the simulated results for the panel stamping processes are shown and discussed. Its application is being increased especially in the stamping industrial area for the cost reduction, weight saving, and improvement of strength.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.174-177
• /
• 2008

This paper replaces an conventional 300-austenitic stainless steel sheet to a 400-ferritic stainless steel for the cost reduction of a pulsator cover of a washing machine. However, ferritic stainless steel has poor formability in comparison with austenitic one. The low formability of ferritic steel results in problems during stamping such as fracture, wrinkling, shape inaccuracy and so on. Design modification of the stamping tool is carried out with the aid of the finite element analysis for multi-stage stamping process. The simulation results show that fracture occurs on top of the product while wrinkles are generated by the excess metal near the wing part. Modification of the initial stamping die is performed to improve metal flow and to eliminate problems during the stamping process. Simulation with the modified design fully demonstrates that safe forming is possible without inferiorities.

• 소성∙가공
• /
• 제25권6호
• /
• pp.396-401
• /
• 2016

Recently, Multi-strength hot stamping process has been widely used to achieve lightweight and crashworthiness in automotive industry. In concept of multi-strength hot stamping process, process design of tailor rolled blank(TRB) in partial heating is difficult because of thickness and temperature variation of blank. In this study, springback prediction of TRB in partial heating process was performed considering its thickness and temperature variation. In partial heating process, TRB was heated up to $900^{\circ}C$ for thicker side and below $Ac_3$ transformation temperature for thinner side, respectively. Johnson-Mehl-Avrami-Kolmogorov(JMAK) equation was applied to calculate austenite fraction according to heating temperature. Calculated austenite fraction was applied to FE-simulation for the prediction of springback. Experiment for partial heating process of TRB was also performed to verify prediction accuracy of FE-simulation coupled with JMAK equation.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.219-226
• /
• 2010

스탬핑 프로세서는 고생산성과 낮은 가격으로 인해 자동차 차제나 항공기 부품, 그리고 전자제품 등 다양한 장치에 널리 이용된다. 최근에 에너지 산업과 연관되어 연료전지 분리판, 열교환기 등에 사용되는 주름구조를 가지는 박판의 응용이 급속히 증가되고 있다. 그러나 복잡한 형상 때문에 주름구조물을 한번의 성형으로 만들기가 매우 어렵다. 따라서 본 연구에서는 다단성형공정을 이용하여 성형성을 향상시키는 방법을 제안하였다. 1 차 박판성형 후 열처리를 통하여 가공경화 부분을 제거하고 다시 성형하는 방법으로 복잡하고 실용성이 높은 박판구조물 제작이 가능하도록 하였다. 본 연구에서는 제안한 방법을 검증하기 위하여 판형 열교환기에 응용이 가능한 두께 $100{\mu}m$를 가지는 박판주름구조를 제작하고 공정변수를 연구하였다.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.13-19
• /
• 2018

This research is to optimize Single-Piece Side otr reinforcement using Hot-stamping and to strengthen weak regions on Single-Piece Side otr reinforcement. As a consequence, the weight and the number of parts were reduced and resulting in improvement of impact and stiffness performance when compared to multi-piece construction.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.25-29
• /
• 1999

The lead frame manufactured by press stamping process, is an important part of semiconductor. The recent technical trend of semiconductor, chip sized and high performance package technology, requires the lead frame to be of more multi-leads and of fine ILP (Inner Lead Pitch). As the ILP is getting finer, its corresponding punch of the stamping die is getting narrower. The punch narrower than its stamping limit has been broken due to local buckling. This paper analyzed the phenomena of punch breakdown. Moreover, the punch design was modified to increase the critical limit of buckling force. This paper, also, suggested new design rules of the punch, which asks the modification of its lead frame design that has to be considered in the stage of semiconductor package design. The new design rules of lead frame design yields a good reliability of semiconductor package as well as a good quality of lead frame.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.309-314
• /
• 2010

Stainless steel stamping multistage pump has become the mainstream of civil multi-stage pump. Combined with the technological features of stamping and welding pump, the studies of design for hydraulic parts of pump were come out. An $L_{18}$（$3^7$）orthogonal experiment was designed with seven factors and three values including blade inlet angle, impeller outer diameter, guide vane blade number, etc. 18 plans were designed. The two stage of whole flow field on stainless steel stamping multistage pump at design point for design was simulated by CFD. According to the test result and optimization design with experimental research, the trends of main parameters which affect hydraulic performance were got. After being manufactured and tested, the efficiency of the optimal model pump reaches 61.36% and the single head is more than 4.8 m. Compared with the standard efficiency of 53%, the design of the stainless steel stamping pump is successful. The result would be instructive to the design of Stainless steel stamping multistage pump designed by the impeller head maximum approach.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.156-162
• /
• 2005

In this paper, we study the mechanism of lead deformation by numerically simulating the stamping process by means of a commercial finite element code. It is very important to analyze effects that the lead shape makes on the lead deformation, because the lead shape is often modified in order to minimize the deformation or to increase the buckling critical load of the punch. Therefore the stamping process, first, numerically simulated by considering as a quasi-static problem. Second, the effect on the lead deformation due to the lead shape variation, a linear lead geometry and a bent lead, was numerically analyzed and discussed. Finally, the punching order was optimized fur multi-lead generating stamping process. The results show that the bent lead is little bit more shifted than the linear lead after the punching process. But the bent lead is vertically less deformed than the linear lead. The punching order to successively generate the lead is good to keep the lead space uniform. The results will be very effectively applied for the design of the blanking or punching dies in industry.

• 한국정밀공학회지
• /
• 제27권5호
• /
• pp.75-84
• /
• 2010

The aim of this paper is to design the blank shape of SPFH 590 high strength steel for stamping of the center hinge of automotive via numerical analyses and experiments for multi-stages transfer forming process. Three-dimensional elasto-plastic finite element analyses for the transfer forming process with six stages were performed using a commercial code AUTOFORM V4.2. The influence of the blank shape on the formability and the shape conformity were quantitatively examined through the FE analyses. From the results of the FE analysis, a feasible shape of the blank and the forming load were estimated. Stamping experiments were carried out using the proposed blank shape. The results of experiments were shown that the center hinge parts with the desired shapes can be manufactured successfully as the proposed blank shape is used. Through the comparison of the results of the experiments with those of the analyses, it was shown that the estimation of blank shape using the FE analysis is a proper methodology to create a feasible shape of the blank for the center hinge of automotive.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.141-145
• /
• 2000

A systematic method to find the optimal blank shape for sheet forming is proposed by coupling the numerical simulation technique. A weighted parameter was introduced in order to simplify the multi-variable optimization problem to a single-variable problem. The proposed method has been applied to the blank design of drawing processes to obtain the near-net shape within the required error bound after forming, Excellent results have been obtained between the numerical results and the target contour shapes. Through the investigation the proposed systematic method for optimal blank design is found to be effective in the practical forming processes